|
|
Air filter for mists and vapours from soluble or neat oil for machine tools.
The DARWIN series, patented and available in 4 models, covers throughput range of 600 to 3.000 m³/h. This means that it can cope with widely differing applications, from small lathes to grinding machines or complex machining centres.
Darwin with turbine (T): filtration of air containing soluble oil mist with the presence of heavy particulate.
Darwin with single-centrifuge (M): filtration of air containing mists of soluble and neat oils with presence of small quantities of particulate.
Darwin with double-centrifuge (D): filtration of air containing mists and vapours of soluble and neat oil with presence of small quantities of particulate.
|
|
Micro Air's line of commercial air cleaners is designed to control airborne particulate and fumes that are present in commercial facilities. These include cigarette and cigar smoke, paper dust, toner dust, printing odors and solvents, carpet odors or other indoor air pollutants. With options like wall mount, flush ceiling mount, and below or above ceiling we will solve your specific air quality issues.
These Media units utilize a series of filters to collect the particulate. These include pre-filters, media bag filters, HEPA filters, and/or charcoal modules. Micro Air equipment can be configured with various combinations of media to most effectively capture the specific particulate or fume.
|
|
The industrial models offer three types of filtration. Media units utilize a series of filters to collect the particulate. These include pre-filters, media bag filters, HEPA filters, and charcoal modules. The unit can be configured with any combination of media to most effectively capture the specific particulate or fume.
Cartridge units utilize self- cleaning, high efficient, cartridge filters. These reduce filter replacement cost as the filter elements are continually cleaned by compressed air as the unit is operational. All Micro Air® cartridge air cleaners utilize the revolutionary Roto-PulseT cleaning system. This cleaning method has proven far more effective at cleaning the filter that the traditional reverse-jet systems.
Industrial electrostatic models use a series of collecting cells that are electronically charged. As the particulate passes through the ionizer section of the unit, the individual dirt particles receive an opposite charge that causes them to collect on the cell plates.
Micro Air® industrial air cleaners are available in models from 100 to 6000 CFM with a broad range of filtration options. This total versatility allows us to recommend just the right model for your particulate needs.
|
|
The Camfil Farr Pharmaseal provides cleanroom level air filtration for pharmaceutical or biotechnology facilities as well as any oterh facility where clean space ia a manufacturing or health-related requirement.
Housing is leak tested at 3.0" w.g. to ensure the housing will not leak under normal operating conditions. The housing is also visually inspected and tested for filter fit.
Is manufactured in various configurations from 0.63 aluminum or 16-gauge stainless steel.
May be installed in a T-bar ceiling or flush mounted in a solid ceiling.
|
|
Darwin: the innovation friend of the environment!
Thanks to Darwin, the air filter, that mounted on machine tools, cleans the air in work places, Losma has been among the marked companies to the prize the Innovation friend of environment 2002.
The event has been promoted by Legambiente, co-promoted by the Polytechnic of Milan and the Bocconi University, with the contribution of Confindustria and the sponsorship of the Lombardy Region and the Ministry of the Environment and the Protection of the Territory.
This acknowledgment rewards the engagement of the companies for continuous research and development of innovations compatible with the environment.
From the 1974 Losma operates in the field of the air filtering in industrial workplaces, with the maximum attention to the topics of the emergency and of the protection of the environment inside of the job places.
The Darwin air filter, patented, has been marked as personalized system, careful to the reduction of the energetic consumptions for the aspiration and cleaning of the air from oil fogs of machine tools.
|
|
All models in the air filter series can be coupled to special units that provide real and proper superfiltration. Their use permits many permutations and gives performance levels of up to 99.97% efficiency. These special units can be added at any time, even after the installation of the air filter. Guard: pre-filter for oil mist with swarf. Synthesis: electrostatic after-filter for smokes. Clipper: cartdrige after-filter for micro-mist. Microfilter: activated carbons after-filter for bad/hazardous odours.
|
|
Gemini represents the perfect solution for all cases where the customer in little spaces has the need of both a pre and post-filtration.
Thanks to the compact shape, Gemini adaptes very easely to all type of machine tools.
Gemini is supplied with a prefiltration stage and another filter with specific efficiency depending on the needs of the customer (>95% or >99,95% - Norms CEN EN 179/1822).
GEMINI has a particular design, already patented, which makes maintenance operations and filters replacement very easy.
Gemini is really customizable in fact it is possible to have different combinations of filters depending on the desired efficiencies and maintenance intervals even after the first installation.
|
|
The DELTOLE® is an oil mist collection unit which purifies and cleans the air in
working areas, decreases fire risk hazards and operator accidents and increases
productivity. It is especially recommended for all metal processing applications.
OPERATING PRINCIPLE
The DELTOLE® uses 4 fundamental principles to trap oil particles :
• The oil mist is separared by the fan impellor or by a cyclonic
system which allows the majority of oil particles to coalesce.
• The inertia force ensures that the droplets formed in this way are
retained and then migrate to the collection tank through a wire
knit filter.
• The diffusion forces with “Brownian” motion deal with the very
fine particles by means of a high efficiency filter used as an
option instead and in place of the last standard final filter.
• For use without recycling, a multi-layer wire knit filter can be
substituted for the final filters. The oil collected by the filter is
continuously evacuated by means of a siphon.
|
|
Purifies the air in working environments in which blankets of oily smoke are created.
Mechanical industries, machine-tool environments.
|
|
Emma is the big sister in the 3nine product family. Emma was designed specially for applications where a high air flow is essential, for example on very large or open machine tools.
Emma has a capacity of 1800 cfm (3000 m3/h). Multiple Emma's can be interconnected using the 3nine modular system to create a solution for flow rates above 1800 cfm (3000 m3/h).
|
|
Clara is 3nine's best-selling oil mist separator. With a flow rate of 700 cfm (1,000 m³/h) it is suitable for most machine tools. Clara has been fitted to practically every type of machine tool for numerous customers in Sweden and elsewhere in Europe.
Clara operates solely on the centrifugal separation principle and therefore requires very little maintenance. Clara does not clog up like a filter - even under extreme conditions with high solids loading, such as the machining of casing and in grinding applications.
|
|
Lina is the smallest oil mist separator in the 3nine product family. It was specially designed for small, enclosed machine tools, where the need for extraction vacuum is limited.
Lina has a capacity of 350 cfm (500m³/h) and is mounted on each machine tool. This saves floor sopace and unnecessary pipe work. It also makes it easier to move the machines when production requirements change.
|
|
The oil mist separator for tough applications
Petra is specially designed to handle applications having high degree of solid particles, such as grinding and polishing applications, machining of cast iron and heat treatment (quench oil) applications.
Petra has a capacity of 700 cfm (1,000 m3/h) and can easily be installed on the top of the machine tool it is suitable for most machine tools. This saves floor space and unnecessary pipe work and unnecessary maintenance on pipe, which is quite important in these types of applications, where allot of solid particles deposits in the pipes. It also makes it easier to move the machine tools when production requirements change.
|
|
|
Industrial air cleaners are suitable for extracting welding fumes in situations where it is impossible to use an extraction arm at source. They are suitable for treating regular and oily welding fumes originating from oil treated steel. The units are available in two capacities. The choice depends on the volume of air that must be treated per hour.
|
|
Micro Air® dust collectors utilize cartridge filtration and are available in a large range of configurations up to 24 cartridge models. All are sized and rated for the proper air-to-cloth ratio to solve a wide variety of applications such as weld smoke, powder dust, grinding dust, paper dust, etc.
Micro Air® dust collectors are designed and manufactured with standard features that set them apart from the competition. These include
Roto-PulseT Cleaning
Provides a much more efficient cleaning cycle for increased air flow and longer cartridge life.
Gravity Flow Design
Dirty air always flows across the filters from top to bottom utilizing the natural downward force of gravity to get the particles to the filtration.
Compact Design
A small footprint of only 42" x 48" allows Micro Air dust collectors to be located in virtually any area.
Easy Maintenance and Installation
All electrical and air connections are outside the cabinet for easy installation and maintenance.
After-Pulse is Standard
Micro Air provides an after-pulse cleaning cycle in addition to automatic on-line cleaning. This allows the unit to pulse the cartridges after power is shut off for an effective cleaning at the end of a shift.
Complete Single-Source System Design
We can design and provide a complete dust control system including the collector and the ductwork to solve your particular problem. This is your assurance of the best possible total system supplied from a single source.
|
|
Daikin’s 4th generation air purifier offers improvements at all levels.
Allergy sufferers and others who appreciate the value of clean air can take heart. With the MC707 Air Purifier, Daikin has brought its formidable innovative tradition – honed in the residential and commercial climate control sector – to bear on this growing market segment.
The MC707 removes the most common allergens such as pollen, dust, mite droppings and mold and adjuvant substances such as formaldehyde.
The new technology means cleaner air and increased performance with the same whisper quiet operation in an aesthetically pleasing design.
For more information or other Daikin products, please go to the link and you will be connected to the official Daikin site.
|
|
|
This portable cartridge system is a self-contained media air cleaner, perfect for welding fume extraction and other source capture applications in industry. The AQE 2000 air cleaner captures airborne contaminants such as welding smoke, grinding dust, plastic dust and other fine particles. Standard reverse pulse cleaning system extends life of cartridges.
|
|
Applications
They prevent abrasive dirt particles from causing early wear in engines and aggregates. Sound media engineering and the media expertise at MANN+HUMMEL result in the highest quality products.
Advantages
- MANN+HUMMEL air cleaner systems for flows from 0.15 to 60 m³/min consist of an extensive standard range with different designs in plastic and metal as well as custom-made solutions
- compact air cleaners for applications with limited space and custom-made solutions
- an extensive range of accessories
|
|
| ... products without technical information |
| |
|
Filter Skids are the compact and immediate solution for many filtration needs. These are small units with flow rates from 10-250 gpm and a filtration range from 3,0005µ-5µ. Small centrifical pumps 3-50 h/p, with any voltage. Available in all SST construction at a very competitive price.
|
|
DEXCEL PRINT 20.22 is a biotechnologic fluid which has been specifically made for the removal of heatset inks used in offset web-fed machine and sheet offset printing machine.
DEXCEL PRINT 20.22 is convenient for the cleaning of inking rollers and blankets. It is used with rag, in emulsion at 25-30% in water.
It also adapted to automac cleaning installations.
DEXCEL PRINT 20.22 exactly meets the requirements of production and maintenance managers, in terms of performance, lack of toxicity, environment, and safety.
|
|
Ideal for electrical/electronic and fine parts
Cleans and degreases delicate precision mechanisms
Penetrating action removes oil, grease, dirt,
flux and other contaminants
Does not contain chlorinated solvents
Low odor
Fast evaporation
No residue
Safe on metal, plastic, rubber, paint, fabric
and glass surfaces
Approved by Agriculture Canada for use in
food processing plants
Inverta Spray Valve lets you spray in
an upright or inverted position
NSF registered category K2
|
|
|
|
see the results for the following category
