|
|
Darwin: the innovation friend of the environment!
Thanks to Darwin, the air filter, that mounted on machine tools, cleans the air in work places, Losma has been among the marked companies to the prize the Innovation friend of environment 2002.
The event has been promoted by Legambiente, co-promoted by the Polytechnic of Milan and the Bocconi University, with the contribution of Confindustria and the sponsorship of the Lombardy Region and the Ministry of the Environment and the Protection of the Territory.
This acknowledgment rewards the engagement of the companies for continuous research and development of innovations compatible with the environment.
From the 1974 Losma operates in the field of the air filtering in industrial workplaces, with the maximum attention to the topics of the emergency and of the protection of the environment inside of the job places.
The Darwin air filter, patented, has been marked as personalized system, careful to the reduction of the energetic consumptions for the aspiration and cleaning of the air from oil fogs of machine tools.
|
|
All models in the air filter series can be coupled to special units that provide real and proper superfiltration. Their use permits many permutations and gives performance levels of up to 99.97% efficiency. These special units can be added at any time, even after the installation of the air filter. Guard: pre-filter for oil mist with swarf. Synthesis: electrostatic after-filter for smokes. Clipper: cartdrige after-filter for micro-mist. Microfilter: activated carbons after-filter for bad/hazardous odours.
|
|
Air filter for mists and vapours from soluble or neat oil for machine tools.
The DARWIN series, patented and available in 4 models, covers throughput range of 600 to 3.000 m³/h. This means that it can cope with widely differing applications, from small lathes to grinding machines or complex machining centres.
Darwin with turbine (T): filtration of air containing soluble oil mist with the presence of heavy particulate.
Darwin with single-centrifuge (M): filtration of air containing mists of soluble and neat oils with presence of small quantities of particulate.
Darwin with double-centrifuge (D): filtration of air containing mists and vapours of soluble and neat oil with presence of small quantities of particulate. |
|
Gemini represents the perfect solution for all cases where the customer in little spaces has the need of both a pre and post-filtration.
Thanks to the compact shape, Gemini adaptes very easely to all type of machine tools.
Gemini is supplied with a prefiltration stage and another filter with specific efficiency depending on the needs of the customer (>95% or >99,95% - Norms CEN EN 179/1822).
GEMINI has a particular design, already patented, which makes maintenance operations and filters replacement very easy.
Gemini is really customizable in fact it is possible to have different combinations of filters depending on the desired efficiencies and maintenance intervals even after the first installation.
|
|
The DELTOLE® is an oil mist collection unit which purifies and cleans the air in
working areas, decreases fire risk hazards and operator accidents and increases
productivity. It is especially recommended for all metal processing applications.
OPERATING PRINCIPLE
The DELTOLE® uses 4 fundamental principles to trap oil particles :
• The oil mist is separared by the fan impellor or by a cyclonic
system which allows the majority of oil particles to coalesce.
• The inertia force ensures that the droplets formed in this way are
retained and then migrate to the collection tank through a wire
knit filter.
• The diffusion forces with “Brownian” motion deal with the very
fine particles by means of a high efficiency filter used as an
option instead and in place of the last standard final filter.
• For use without recycling, a multi-layer wire knit filter can be
substituted for the final filters. The oil collected by the filter is
continuously evacuated by means of a siphon. |
|
Purifies the air in working environments in which blankets of oily smoke are created.
Mechanical industries, machine-tool environments. |
|
Clara is 3nine's best-selling oil mist separator. With a flow rate of 700 cfm (1,000 m³/h) it is suitable for most machine tools. Clara has been fitted to practically every type of machine tool for numerous customers in Sweden and elsewhere in Europe.
Clara operates solely on the centrifugal separation principle and therefore requires very little maintenance. Clara does not clog up like a filter - even under extreme conditions with high solids loading, such as the machining of casing and in grinding applications. |
|
Emma is the big sister in the 3nine product family. Emma was designed specially for applications where a high air flow is essential, for example on very large or open machine tools.
Emma has a capacity of 1800 cfm (3000 m3/h). Multiple Emma's can be interconnected using the 3nine modular system to create a solution for flow rates above 1800 cfm (3000 m3/h). |
|
The oil mist separator for tough applications
Petra is specially designed to handle applications having high degree of solid particles, such as grinding and polishing applications, machining of cast iron and heat treatment (quench oil) applications.
Petra has a capacity of 700 cfm (1,000 m3/h) and can easily be installed on the top of the machine tool it is suitable for most machine tools. This saves floor space and unnecessary pipe work and unnecessary maintenance on pipe, which is quite important in these types of applications, where allot of solid particles deposits in the pipes. It also makes it easier to move the machine tools when production requirements change. |
|
Lina is the smallest oil mist separator in the 3nine product family. It was specially designed for small, enclosed machine tools, where the need for extraction vacuum is limited.
Lina has a capacity of 350 cfm (500m³/h) and is mounted on each machine tool. This saves floor sopace and unnecessary pipe work. It also makes it easier to move the machines when production requirements change. |
|
| Industrial air cleaners are suitable for extracting welding fumes in situations where it is impossible to use an extraction arm at source. They are suitable for treating regular and oily welding fumes originating from oil treated steel. The units are available in two capacities. The choice depends on the volume of air that must be treated per hour. |
|
| This portable cartridge system is a self-contained media air cleaner, perfect for welding fume extraction and other source capture applications in industry. The AQE 2000 air cleaner captures airborne contaminants such as welding smoke, grinding dust, plastic dust and other fine particles. Standard reverse pulse cleaning system extends life of cartridges. |
|
Applications
They prevent abrasive dirt particles from causing early wear in engines and aggregates. Sound media engineering and the media expertise at MANN+HUMMEL result in the highest quality products.
Advantages
- MANN+HUMMEL air cleaner systems for flows from 0.15 to 60 m³/min consist of an extensive standard range with different designs in plastic and metal as well as custom-made solutions
- compact air cleaners for applications with limited space and custom-made solutions
- an extensive range of accessories |
|
| ... products without technical information |
| |
The new pump innovation from Nilfisk-ALTO has focused on providing superior cleaning power and even higher durability.
With the new POSEIDON 5, you can get your cleaning task done
quicker and prolong the working life of your pressure washer,
reducing your overall cleaning costs.
The new NA5 wobble disc pump unit is innovation from Nilfisk-
ALTO focusing on providing superior cleaning power and even higher durability. Furthermore it is also quiet, making cleaning more comfortable.
POSEIDON 5 clearly still offers SilentPower. |
|
The most innovative hot water line on the market The Nilfisk-ALTO NEPTUNE range spans the compact to the very heavy duty lines and is fit for any imaginable application in automotive, industry or agriculture. Even the most compact units offer the customer the benefit of some of the most
powerful innovations on the market.
SilentPower motor pump units provide long life and low noise level. The EcoPower boiler system not only reduces air pollution but, just as important, offers high efficiency heating performance with up to 18% fuel cost savings.
A wide range of features also protect the machines against malfunctions, a guarantee of long lifetime.
You just cannot do better than NEPTUNE! |
|
EDS - ECO Dosage Solution - is designed to provide a modern and highly efficient means of mixing water and detergents in cleaning applications. In tests performed, Nilfisk-Advance has been able to prove that EDS – ECO Dosage Solution – offers significant cost and time savings, as well as more reliable cleaning results. Since the precise dosage of detergent will always be applied, human error in mixing is completely eliminated.
Furthermore, on scrubber/dryers fitted with EDS – ECO Dosage Solution – the detergent is added to the water at the scrub deck – not in the tank. This means that only clean water is ever in the tank, making it unnecessary for it to be emptied or cleaned. This feature significantly reduces downtime and increases productivity.
On ECO Solution mode, Nilfisk’s scrubber/dryers reduce water consumption by as much as 50%. Nilfisk’s BR 601 model, for example, only uses 1 litre of water for cleaning as much as 56 m². |
|
Industrial series:
a very ample and complete range that understands models to cold and warm water and with tensions both in singlephase that threephase. To use him in every sector for the cleaning with tall pressure and tall temperature with the possibility to mix, to application, a chemical additive. In the standard versions the powers reach 400 cafes with courses up to 60 lts. / min. In the water versions warm the temperature is adjustable up to 150° with possibility to produce vapor. With the specific kit it is possible to use her as hydrosandblasters. Thanks to the use of pomps and tested boilers and components to the state-of-the-art one our high pressure are how much of can offer better the market. Reliability, constructive quality and safety, are at the base of our products. We prepare of numerous used revised guaranteed.
Special series:
to application we are able to plan and to realize special groups with particular preparations. Our technical office is to your disposition.
Semiprofessional series:
numerous models both to warm water and to cold water for demands hobbyand for small interventions. They understand numerous accessories that make her functional for varied demands: kit uncork, kit sanding, rotating brush… |
|
| The Jetvent Duct Cleaner by Triventek is the result of many years experience in the ductcleaning industry. It combines the strength of a powerful industrial engine with a light weight compact design which together with special shaft technology provides a long term solution for safe and comprehensive cleaning of ductwork... |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
'The Mammoth' vacuum collection unit
High Powered Heavy Duty Industrial Vacuum Cleaning & Bulk Collection Solution for industries with the most demanding clean up problems. High vacuum and airflow provide the strength to clean up the most inaccessible areas quickly, with minimum labour and in an economically effect.
Working as the heart of fixed pipe work systems in heavy industries such as Iron & Steel, Cement, Power Generation, Quarries etc the Mammoth provides the power to enable multiple operators to work simultaneously.
On a large site, with long conveying distances, or where cross contamination of products is to be avoided, shorter, dedicated pipe runs can be employed.
Available options
• Power units from 7.5 to 150kw
• Electric, Diesel, LPG engines
• Acoustic enclosure for noise reduction
• ATEX compliant models
• Support frames, access and service platforms
• Skid/ Truck or Trailer mounting
• Wide variety and sizes of hoppers including self-tipping
• Dump, slide, rotary valve hopper discharge options
Clyde Materials Handling engineers can also design custom specific requirements.
For further details please see: www.clydematerials.com
|
|
|
|
see the results for the following category
