|
|
AirClean Systems PCR Combination Workstation
AirClean®Systems PCR workstations with UVTect™ microprocessor control, allow you to maintain a Class 100 clean work area during PCR preparation. The AC600 Series LFUV Model has a built-in 254 nm ultraviolet light that allows the operator to irradiate tubes, flasks and pipettes between amplifications. The 254 nm ultraviolet light will effectively destroy potentially contaminating DNA and RNA within minutes. UVTect™ monitors the life of the bulb to ensure proper levels of irradiation.
The workstations feature a unique interlocking sash with a safety overlap to prevent gaps. The sash also has a safety switch that automatically turns off the ultraviolet light and activates the blower and fluorescent light when the sash is raised. This revolutionary uni-body design provides unmatched user protection from harmful ultraviolet rays during the sterilization process. HEPA filtered units have a built-in monitoring system to alert the user when to change the HEPA filter.
|
|
BIGNEAT's PCR UV workstation efficiently protects against contamination by bathing PCR aparatus in sterile air and limiting the risk of contamination from the operators arms, or from equipment bought into the otherwise sterile environment.
Powerful UV lamps are combined with optical reflectors to ensure uniform intensity distribution of the sterilising UV radiation.
1. Superb all round vision
2. Electronic filter saturation indicator
3. Quiet operation
SPECIAL BIGNEAT FEATURE: Fan speed increases when door is opened to maintain air velocity to 0.45 m/s at the front access aperture.
Available 800mm wide as PCR UV cabinet, or as a UV sterilisation cabinet (no HEPA filtration)
|
|
POWERFUL UV DECONTAMINATION
The UV lamp insures a full decontamination of the entire work surface, enclosure walls and PCR equipment.
AN ERGONOMY OF QUALITY
The ergonomy of the working apertures is unique. It enables the protection of the handling while allowing the operator to have access to the entire surface of the enclosure.
ENCLOSURE SIZE ADAPTED TO ALL PCR EQUIPMENT
The Biocap™ enclosures have been sized to receive tube racks, pipettes, minicentrifuges and thermocyclers.
PROTECTION OF THE OPERATOR
The enclosure is 10 mm thick so as to insure a full protection against UV and B rays.
AUTOMATIC SHUTT OFF OF THE UV LAMP
The UV lamp switches itself off automaticaly if the door is opened by accident while the lamp is still active.
*PCR is a patented process owned by Hoffmann-La Roche
|
|
AirClean Systems AC600 Series Ductless Workstations
Our most economical workstation for operator and environment protection. Safely remove toxic vapors, gases, fumes and particulate.
Ideal for:
General chemistry involving small volumes of common chemicals
Tissue staining and processing; e.g. histopathology, cytology
Gluing operations
Solvent cleaning of electronic parts
Soldering applications
School demonstration workstations
Forensic applications - containment of fingerprint powders and chemicals such as ninhydrin and cyanoacrylate
Animal necropsy
Standard Features:
AirSafe™ automatic safety controller
Integral base with deep spill lip
No ducting required
Minimal installation - plugs directly into a standard 110V or 220V electrical outlet Extremely quiet operation < 49dB
All thermoplastic construction with application specific sash, base and enclosure material
Available in “low-profile” or tall version 32” or 48” widths with nominal 24” depth
UL, CSA and CE listed
|
|
The fume cabinet, fume hood and extraction chamber all in one.
Ideal where complete freedom is required to work on several processes at once and where ease of visibilty is essential. Where fumes spread rapidly, for example in draughty working conditions, the Cleancab™ can enclose the source, enabling fumes to be captured before they contaminate the workplace.
Cleancab™ fume hoods: -
Have a shatterproof clear polycarbonate hood
Utilise a chemically resistant base
Include an integral airflow valve
Are heat resistant
Are ESD safe
Are easily cleaned
|
|
Trade name: ECO III
Filtration of the air of admission - News approaches
Advantages:
- Not need for supports to measure
- Important Profit of time and money
- Output raised for small overall dimensions
it system of air filtration can be close to the turbo-compressors
- Profit of output
- By its reduced dimensions, releases from space in the driving compartment.
Applications:
- Road vehicles including the buses
- Specialized Applications, practically including all the types of vehicles and installations.
|
|
| ... products without technical information |
| |
An extremely versatile structure, to which a wide range of accessories can be added
A functional design that ensures it's easy to use
Part of the Rousseau solution, including Work Centers, Spider® Shelving System, Mobile and Stationary Cabinets, Multi-Drawer Cabinets, and Drawers in Shelving
45" W X 42" D X 91" H
Store up to 12 bumper covers
Can store bumper cover for small cars and trucks in the same rack
Levels are ajustable in height
Polyurethane casters do not mark floors |
|
MEASUREMENTS:
Total height: 860 mm.
Base: 1210 x 2290 mm.
PRINCIPAL CHARACTERISTICS:
* For measurements of tires of "cars"
* Folding(pliable) and apilabes.
* You guide for lift truck.
ENDED IN:
Galvanized electrolytic.
|
|
Practicable of design specific according to your needs; Dimensions on request; Enamelled completion. FRENCH MANUFACTURE.
We study conceive and manufacture our practicable according to your needs. On the photograph you can see by exemble practicable which was conceived for the storage of wheels of tram. Decreasing prices in quantity.
|
|
BPR retention Pallet Tray
NEW: The BPR is also available in 400L and 200L versions.
The retention pallet tray is made of steal and has been designed for the storage and outside decanting of liquid products that may contaminate the ground. This tray has been clearly studied to offer a secured use on the building and civil engineering sites. The BPR can store a 1000L container or two 200L barrels, or several barrels with a total capacity under 1080L, to comply with the actual legislation.
- 1 steel mesh surface with 2 different positions by manual operation:
Flat surface for a 1000L container or several tanks.
Barrel support on rollers with a latch system for two 200L tanks.
- 1 lower shelf to facilitate and secure the decanting of the products.
- 2 entry ways for a forklift truck lifting.
- 1 prehension device with 4 lifting eyes on the upper part for a crane lifting (Can only be moved with all doors closed).
- 1 mesh wired covering front door with locker.
- Lateral and rear doors for weather protection.
- The lateral walls are articulated to facilitate the attachment of the tanks or containers.
- 1 protecting roof separated in 2 removable parts to enable the crane to lift the BPR with a 1000L container inside.
- 1 document protection pocket fitted inside the BPR.
- Possibility to personalize the BPR.
|
|
Metal vat of retention for the installation of 2,4 barrels of 220 liters or 1 cubitainers of 1000 liters, volume of retention 240,440 or 1050 liters out of standard; sealing tested in factory; caillibotis of meshs 30 X 30 mm galvanized hot; height under foot 100 mm out of standard; Passage for displacement with the lifting truck and transpallet; Lid assembled on 2 jacks with gas or carries beating with lock and keys. Special achievements on mesure.FABRICATION FRENCH
OPTION: hot galvanization, coating antiacids; caillibotis out of antacid fibers, etc ..........
The standard vat of retention "Protec tainer" is a simple solution and ideal for your liquids requiring a retention in the event of accidental escapes (Pollution) and that in order to preserve our environment. Its lid protects it from the bad weather, it can be thus stored in outside. Its lock 2 points prevents the access to the barrels once closed.
|
|
Waste skips tilting -
Dump trucks of type "VID-BOX"
Volume 600,900 and 1200 liters
For the collection of all types of waste
Use with a device of discharge taken again on the forks of the forklift truck
options:
wheels, lid, complete sealing, double bottom, valve of draining, marking, galvanized hot, etc .......
|
|
| ... products without technical information |
| |
The Rousseau mobile cabinet is one of the safest on the market
It is very easy to modify the configuration of the cabinet; drawer order can be changed at any time
Polyurethane casters with high quality rolling systems make moving the cabinet easy and do not leave marks
For a personalized configuration, contact a customer service representative |
|
Mobile Storage Cabinets
5-Drawer 79-Compartment Shallow Depth Mobile Storage Cabinet
5-Drawer 127-Compartment Extra-Wide Shallow-Depth Mobile Storage Cabinet
4-Drawer 100-Compartment Standard Mobile Storage Cabinet
8-Drawer 142-Compartment Shallow-Depth Mobile Storage Cabinet
8-Drawer 220-Compartment Extra-Wide Shallow Depth Mobile Storage Cabinet
|
|
Wherever you need to work, Stanley® Vidmar® mobile storage cabinets are in on the action! Heavy-duty mobile casters make our mobile cabinets easy to move, allowing you to position them exactly where you need them.
Stanley Vidmar offers preconfigured mobile storage cabinets, or you can custom-build your mobile cabinet in any size and configuration you choose! All Stanley® Vidmar® mobile storage cabinets require lock-in/lock-out latches or single-drawer release.
All mobile cabinets are backed by Stanley Vidmar's lifetime warranty. For more detailed information on mobile cabinet options, visit our Interactive Product Catalog or contact a Storage Sales Engineer.
|
|
|
AP&T´s niche tools and production solutions are available in product areas like deep drawing, fire extinguishers, heat exchangers, air duct parts, pressure vessels and filter housings in blank thickness from 0,5 to 0,9 mm.
|
|
Camfil Farr offers a wide range of housings in different versions i.e. galvanised or staniless steel. All Camfil Farr housings are always best in class products.
Example of advatages:
* Easy to install
* Modular construction
* No tools needed to change filters
* Gasket to seal between door and filter
* Clamping device for the filter
* Stable and secure design |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category