|
|
AirClean Systems AC600 Series Ductless Workstations
Our most economical workstation for operator and environment protection. Safely remove toxic vapors, gases, fumes and particulate.
Ideal for:
General chemistry involving small volumes of common chemicals
Tissue staining and processing; e.g. histopathology, cytology
Gluing operations
Solvent cleaning of electronic parts
Soldering applications
School demonstration workstations
Forensic applications - containment of fingerprint powders and chemicals such as ninhydrin and cyanoacrylate
Animal necropsy
Standard Features:
AirSafe™ automatic safety controller
Integral base with deep spill lip
No ducting required
Minimal installation - plugs directly into a standard 110V or 220V electrical outlet Extremely quiet operation < 49dB
All thermoplastic construction with application specific sash, base and enclosure material
Available in “low-profile” or tall version 32” or 48” widths with nominal 24” depth
UL, CSA and CE listed
|
|
The fume cabinet, fume hood and extraction chamber all in one.
Ideal where complete freedom is required to work on several processes at once and where ease of visibilty is essential. Where fumes spread rapidly, for example in draughty working conditions, the Cleancab™ can enclose the source, enabling fumes to be captured before they contaminate the workplace.
Cleancab™ fume hoods: -
Have a shatterproof clear polycarbonate hood
Utilise a chemically resistant base
Include an integral airflow valve
Are heat resistant
Are ESD safe
Are easily cleaned |
|
AirClean Systems Class I Biological Safety Hood
Constructed from all white seamless polypropylene, AirClean® Systems horizontal laminar air clean benches are the ideal solution for Class I biological safety hood applications.
Features:
* UVTect™ microprocessor controller
* All polypropylene construction - NO MORE RUST!
* Seamless, smooth construction minimizes air turbulence
* Built-in fluorescent lighting
* All-white surfaces are easy to clean
* Meets ISO 5 and FS209E Class 100 clean bench standards
* 110V or 220V versions |
|
BIGNEAT Class I cabinets draw air past the operator and exhaust through the top of the cabinet, a negative pressure is maintained within the cabinet ensuring containment integrity.
Built to European EN12469:2000 standard
Key features
Available as ducted or recirculatory filtration models (recirc model shown)
Efficient insulation, sound levels less than 55dB(A)
Internal illumination greater than 750 Lux
State-of-the-art electronic management system with airflow indicators and audible alarms |
|
BIGNEAT Biological Safety Cabinets meet all the requirements of European EN12469:2000 Standard.
Great features for the comfort of the operator include:
Ergonomic design
Clear well lit view of the working area
Quiet operation
Easy clean surfaces
BIGNEAT products are built using only the best available materials and using the latest manufacturing techniques to give a quality, long lasting finish - equipment that will give years of consistent and reliable service. |
|
AirMax™ Polypropylene Total Exhaust Fume Hood from AirClean Systems
AirClean® Systems AirMax™ total exhaust polypropylene fume hoods are manufactured from all-white, structural polypropylene. Polypropylene offers excellent chemical resistance. AirMax™ has a seamless design and allows for NO MORE RUST!
Features
* Microprocessor controller - displays real-time airflow
* All Contact Surfaces are constructed of polypropylene - NO MORE RUST!
* Flame-retardant polypropylene interior - Higher temperature working range than fiberglass
* Non-hydroscopic - won’t absorb moisture
* Smoothflow™ air foils for superb airflow performance - Minimizes eddy currents found on other fume hoods
* Large volume spill basin with solid work surface
Optional wet scrubber system is suitable for water soluble gases. Each scrubber is constructed from thermoplastics that are resistant to the gases being scrubbed. |
|
The WS series represents a quality solution for the collection of coolant and oil mist. With 5 sizes, ranging from 250 to 2000 m3/h, it is characterized by a sophisticated design, compact
dimensions and standard accessories.
Specifically developed for the elimination of mist, vapour, smoke and odours typical of wet machining operations these mechanical filters can also be employed in mixed application (wet/dry) and for EDM machines |
|
| The Smog-Hog SG Series mist collector captures high-volume coolant mist and oil smoke from industrial processes including drilling, grinding, screw machining and others. Depending on your requirements, systems can be ducted, unducted or free hanging inside any facility. |
|
Isles AirCleanTM workstations are engineered and manufactured with attractive contemporary styling and the highest quality construction. Recommended for any Class 100 requirement that does not produce by-products that can contaminate the worker or production area. Available as either vertical or horizontal flow models. These specialized workstations are constructed with cold rolled steel for durability and finished with powder coating for long lasting performance. Standard worksurfaces include cleanroom seal.
|
|
MISTKOP's proven design couples simplicity with efficiency. No spinning filter to waste horse-power or cause vibrations due to unbalanced filters. Mist and contaminants are captured at the source rather than after they are dispersed as with unducted or electronic units. Easily replaced, low cost filters. Collected fluid drains to your process or container. Usually hung near the source, but all models are available "inverted" such as VC-51 for direct or floor mounting. Secondary filters can be added for smoke.
Easy to install
Increase production efficiency
Low initial cost
Reclaim valuable lubricants
No rotating filters to get out of balance
Non-electronic
MISTKOP with Exhaust Shell vents filtered fumes, gases, or heat to the outside. Available for all models, standard or inverted. Can also be supplied with HEPA filters for efficiency up to 99.97% at 0.3 micron. |
|
| MistBuster units are efficent, multi-stage mist and smoke collectors. The quiet variable-speed impeller draws mist and smoke through a first stage 4" mist impinger. Then the electrically charged (ESP) collection cell traps the remaining sub-micron mist droplets. Collected liquid is drained back to the coolant tank. Clean, oil-free air is returned to the shop. |
|
The FumeBuster fume extraction and filtration system is specifically designed to protect up to 3 personnel from inhaling hazardous fumes and dust generated by a wide range of manual processes. These include - tinning and potting, gluing, soldering, chemical treatments and dust applications. A range of easy to install kits are available to make the FumeBuster one of the most flexible extraction systems on the market.
Choose from:
75mm diameter high volume arms
38mm diameter high velocity arms
Plenum chambers to create laminar flow across the workbench
CleanCab™ fume hoods / cabinets |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
AirClean Systems Class I Biological Safety Hood
Constructed from all white seamless polypropylene, AirClean® Systems horizontal laminar air clean benches are the ideal solution for Class I biological safety hood applications.
Features:
* UVTect™ microprocessor controller
* All polypropylene construction - NO MORE RUST!
* Seamless, smooth construction minimizes air turbulence
* Built-in fluorescent lighting
* All-white surfaces are easy to clean
* Meets ISO 5 and FS209E Class 100 clean bench standards
* 110V or 220V versions |
|
BIGNEAT Class I cabinets draw air past the operator and exhaust through the top of the cabinet, a negative pressure is maintained within the cabinet ensuring containment integrity.
Built to European EN12469:2000 standard
Key features
Available as ducted or recirculatory filtration models (recirc model shown)
Efficient insulation, sound levels less than 55dB(A)
Internal illumination greater than 750 Lux
State-of-the-art electronic management system with airflow indicators and audible alarms |
|
BIGNEAT Biological Safety Cabinets meet all the requirements of European EN12469:2000 Standard.
Great features for the comfort of the operator include:
Ergonomic design
Clear well lit view of the working area
Quiet operation
Easy clean surfaces
BIGNEAT products are built using only the best available materials and using the latest manufacturing techniques to give a quality, long lasting finish - equipment that will give years of consistent and reliable service. |
|
AirMax™ Polypropylene Total Exhaust Fume Hood from AirClean Systems
AirClean® Systems AirMax™ total exhaust polypropylene fume hoods are manufactured from all-white, structural polypropylene. Polypropylene offers excellent chemical resistance. AirMax™ has a seamless design and allows for NO MORE RUST!
Features
* Microprocessor controller - displays real-time airflow
* All Contact Surfaces are constructed of polypropylene - NO MORE RUST!
* Flame-retardant polypropylene interior - Higher temperature working range than fiberglass
* Non-hydroscopic - won’t absorb moisture
* Smoothflow™ air foils for superb airflow performance - Minimizes eddy currents found on other fume hoods
* Large volume spill basin with solid work surface
Optional wet scrubber system is suitable for water soluble gases. Each scrubber is constructed from thermoplastics that are resistant to the gases being scrubbed. |
|
Isles AirCleanTM workstations are engineered and manufactured with attractive contemporary styling and the highest quality construction. Recommended for any Class 100 requirement that does not produce by-products that can contaminate the worker or production area. Available as either vertical or horizontal flow models. These specialized workstations are constructed with cold rolled steel for durability and finished with powder coating for long lasting performance. Standard worksurfaces include cleanroom seal.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
... see all the products in the category
Axial fans
|
|
|
see the results for the following category
