|
|
The gas-heated Condair GS steam industrial humidifier is used to generate and emit mineral-free, odourless and sterile steam. It can be used with both drinking water and fully-deionised water. The GS processes all commercially-available controlled signals.
|
|
Centrifugal Gas Separator
Application:
For avoiding measuring errors resulting from air or gas contained in liquids measured with volumetric meters.
Reliability:
Maintenance-free
Complete emptying via outlet socket
Special features:
With automatic float-dearation device, level probe and controled magnatic cock or defined return to the process (orifice)
Mandatory for fiscal metering with pump operation in Germany
Bopp & Reuther Messtechnik Centrifugal Gas Industrial separators possess the EWG design approval and are approved for EWG primery approval for fiscal metering
Flexibility:
DN 25 to 400
Up to 20 mPas
Up to 25,000 l/min
Up to PN 50 |
|
| The removal of contaminants is accomplished by first slowing the fumes to a velocity below 500 fpm and then passing the fumes through four stages of scrubbing. The fumes pass first through a water spray during which some of the larger contaminant particles drop out and the remaining fumes are saturated. The second stage consists of a 12" deep pack of polypropylene, nonclogging, spherical type mass packing which is kept constantly wet by a continuous spray. The saturated fumes are impinged upon the packing and the contaminants are absorbed and carried away in the wash water. After passing through the scrubbing stages, the air is mist laden and must then pass through the two stage gravity mist eliminator section. This consists of a drop out area that removes all but the finest mist, then, a series of vertically mounted PVC eliminator blades provide four 30 degree changes in direction and efficiently eliminates entrained water. |
|
| ... products without technical information |
| |
The Gen2 series diese1 powered6- 8ton range with the invincible combination of a 100 HP engine, automatic 3 stage transmission, wet disc brake and rugged chassis design provides the most exceptional performance, manoeuvrability and durability of its class.
lveco IOOHP, 4 professional cylinder, 4.5 liter, turbocharged, M5-MNS professional diesel engine realizes an exceptional output and torque as well as fuel economy, while meeting all EPA and European emission regulations.
Reliable ZF full automatic transmission equipped with a self-diagnostic electronic system and separately linked durable drive axle optimized for the C60/70/800 results in smooth but powerful driving in any application. Fully enclosed, long lived wet disc brake also maximizes productivity by its consistent performance.
Easy-to-read colour TFT LCD display provides not only real time information and error codes for the truck through a CAN bus system but also controls various functions to optimize the truck for the operator’s demands. |
|
| The FKS Series is a heavy-duty, cushion-tire forklift with the power to lift loads up to 100,000 pounds. The compact design allows the forklift to maneuver in tight areas. The FKS Series is extremely durable and can be used in many applications such as paper, forging, steel, die/mold and canning. There are various cab options available including tilt, air-ride and enclosed cab. |
|
| The Titan Series is a compact and highly maneuverable cushion-tire forklift that is used in industries such as paper, steel, beverage and automotive. With a capacity range of 18,000 - 22,000 pounds, the Titan Series features advanced ergonomics, low-profile counterweight and easy-access panels and hoods. |
|
Platinum II Cushion Series
3,000 - 8,000 lb. Capacities
LPG - Dual Fuel
The Platinum II Series is a reflection of Nissan's continuing commitment to producing products of only the highest value. Featuring the most advanced engine technology available in the industry, these lift trucks provide emission levels well below EPA requirements, and include a wealth of standard and optional features to benefit the operator's need for comfort and control. Combined with Nissan's tradition of rugged, reliable construction, the Platinum II Series has become the new benchmark others must now follow.
|
|
| ... products without technical information |
| |
The economizers exhaust gas boilers GN ECO have been studied to be installed in all types of industrial processes when discharging hot gasses in the atmosphere.
Hot gasses, flowing through the GN ECO are used to heat countercurrent, another fluid utilized in industrial processes, achieving important energy savings while reducing operating costs. |
|
The MX range is a compact and affordable steam boiler ideal for small to medium sized users of process steam.
Each professional boiler is individually tailored to your specific needs and manufactured from start to finish in our own factory, thereby ensuring quality control of the very highest standard. All professional fittings are mounted in the factory to make installation on site as quick and easy as possible.
The boiler can incorporate any make of industrial burner to suit a wide range of gaseous or liquid fuels in single, dual or tri-fuel combinations.
The MX boiler has a thermal efficiency in excess of 89% (based on NCV) .
External surfaces are well insulated and finished in tough, Aluzinc cladding.
The front professional door is lined with the latest ceramic fibre technology offering significantly less heat loss than traditional refractory materials.
The MX range has larger heating surfaces and steam space than comparable boilers, meaning desirable low heat transfer rates, Low NOX emissions, easily achievable outputs, and quality dry steam throughout the firing range.
A huge range of accessories are available to further enhance the boiler; contact us for more details.
Manufactured to BS2790 Class 1 with outputs to 3MW (5000 kg/hr) and operating pressures to 17 bar(g) |
|
The OPRA Generator set manufacturer is the best solution in the 2MW electrical power range to produce steam:
-High Turbine exhaust temperatures
-High exhaust flow
-High Overall efficiency |
|
| ... products without technical information |
| |
Dynetek Industries Ltd. designs and manufactures a lightweight Bulk Transport (BT) System for efficient transport of compressed natural gas (CNG) and other compressed gases. These BT-systems allow cost effective development of gas markets, and an Instant Infrastructure(R) by making CNG immediately accessible to end-users.
The unique storage advantage of the BT-System lies in the use of Dynetek's Dynecell (R) cylinders, a seamless, thin wall aluminum liner covered with a full professional carbon fiber overwrap. The Dynecell professional cylinder is non-permeable and exhibits limited expansion under pressure and temperature changes.
For more information visit www.dynetek.com |
|
Dynetek Industries Ltd. designs and manufactures Advanced Lightweight Fuel Storage Systems(R) for compressed natural gas (CNG), compressed hydrogen and technical gases.
The core technology of the system is the DyneCell(R) composite professional cylinder made from a seamless, thin wall aluminum liner covered with a full carbon fibre overwrap. DyneCell cylinders are extremely lightweight and are used in various applications around the world.
For more information visit www.dynetek.com |
|
To fill the tank with your machines or vehicles, do not waste any more time, choose a practical, reliable and autonomous delivery system.
Capacities: 1000,1500 and 2000 liters.
Other galvanized steel mobile versions, 400,600 and 980 liters.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
