|
|
AirClean Systems PCR Combination Workstation
AirClean®Systems PCR professional workstations with UVTect™ microprocessor control, allow you to maintain a Class 100 clean work area during PCR preparation. The AC600 Series LFUV Model has a built-in 254 nm ultraviolet light that allows the operator to irradiate tubes, flasks and pipettes between amplifications. The 254 nm ultraviolet light will effectively destroy potentially contaminating DNA and RNA within minutes. UVTect™ professional monitors the life of the industrial bulb to ensure proper levels of irradiation.
The workstations feature a unique interlocking sash with a safety overlap to prevent gaps. The sash also has a protection switch that automatically turns off the ultraviolet light and activates the professional blower and fluorescent light when the sash is raised. This revolutionary uni-body design provides unmatched user protection from harmful ultraviolet rays during the sterilization process. HEPA filtered units have a built-in industrial monitoring system to alert the user when to change the Hepa filter.
|
|
BIGNEAT's PCR UV professional workstation efficiently protects against contamination by bathing PCR aparatus in sterile air and limiting the risk of contamination from the operators arms, or from equipment bought into the otherwise sterile environment.
Powerful UV lamps are combined with optical reflectors to ensure uniform intensity distribution of the sterilising UV radiation.
1. Superb all round vision
2. Electronic professional filter saturation indicator
3. Quiet operation
SPECIAL BIGNEAT FEATURE: Professional fan speed increases when door is opened to maintain air velocity to 0.45 m/s at the front access aperture.
Available 800mm wide as PCR UV professional cabinet, or as a UV sterilisation cabinet (no HEPA filtration) |
|
AirClean Systems AC600 Series Ductless Professional workstations
Our most economical workstation for operator and environment protection. Safely remove toxic vapors, gases, fumes and particulate.
Ideal for:
General chemistry involving small volumes of common chemicals
Tissue staining and processing; e.g. histopathology, cytology
Gluing operations
Solvent cleaning of electronic parts
Soldering applications
School demonstration workstations
Forensic applications - containment of fingerprint powders and chemicals such as ninhydrin and cyanoacrylate
Animal necropsy
Standard Features:
AirSafe™ automatic safety controller
Integral base with deep spill lip
No ducting required
Minimal installation - plugs directly into a standard 110V or 220V electrical outlet Extremely quiet operation < 49dB
All thermoplastic construction with application specific sash, base and enclosure material
Available in “low-profile” or tall version 32” or 48” widths with nominal 24” depth
UL, CSA and CE listed
|
|
The fume industrial cabinet, fume hood and extraction chamber all in one.
Ideal where complete freedom is required to work on several processes at once and where ease of visibilty is essential. Where fumes spread rapidly, for example in draughty working conditions, the Cleancab™ can enclose the source, enabling fumes to be captured before they contaminate the workplace.
Cleancab™ fume hoods: -
Have a shatterproof clear polycarbonate hood
Utilise a chemically resistant base
Include an integral airflow cock
Are heat resistant
Are ESD safe
Are easily cleaned |
|
Trade name: ECO III
Filtration of the air of admission - News approaches
Advantages:
- Not need for supports to measure
- Important Profit of time and money
- Output raised for small overall dimensions
it system of air filtering can be close to the turbo-compressors
- Profit of output
- By its reduced dimensions, releases from space in the driving compartment.
Applications:
- Road vehicles including the buses
- Specialized Applications, practically including all the types of vehicles and installations. |
|
| ... products without technical information |
| |
The growing electromagnetic pollution and the European and international standards require electromagnetic industrial shielding.
The European EMC 89/336 directive affects electric and electronic equipment which can create or be subject to electromagnetic disturbances.
Professional cabinets and empty enclosures in general do not directly generate any disturbance and are not ruled by the EMC directive.
In order to meet the directive and offer an effective product, Eta has developed a specific Areta cabinet suitable for EMC applications.
|
|
The standard procedures of numerous automotive manufacturers for simulating their products' environmental conditions make high demands on the chamber technology. They require a high degree of flexibility especially of
Special advantages offers the SPS control system which assures that process parameters are reached exactly and rapidly and that they are strictly maintained. The touchpad's clearly structured menu navigation makes it easy and secure to handle the testing chamber. Process data can be visualised, supervised and documented with our professional software called VisiCORR®. For this purpose, the standard chamber is equipped with a Modbus RTU and an Ethernet TDP/IP interface.
|
|
VLM offers you a comprehensive product range of bench top professional cabinets or chest models which covers a wide application and service spectrum going from the classical VDA test (VDA 621-415) or VW PV 1210 with conditionened ambient air to very exigent test procudures according to the factory standards of other automotive manufacturers and suppliers (see "MF" multifunction series).
We are pleased to advise you in order to compile the chamber configuration which fits exactly to your needs. Due to their unique construction and material composition, VLM corrosion testing chambers provide the best conditions to realise a high reproducibility of fully automatic cyclic corrosion tests |
|
VLM corrosion test professional cabinets provide best conditions for the conduction of high humidity tests due to its unique design. The bottom, rear wall and roof are made of stainless steel coated with Halar® (ECTFE), a fluorine polymer used in chemical apparatus engineering. Hence there is a quick transfer of the heat from the heaters below the bottom into the water bath. So the water evaporates and condensates very evenly. The best reproducibility of the climate is achieved by the patented CTD-System
VLM CON cabinets for alternating water condensation tests are equipped with the working system “AIR”. That means that ambient air is introduced into the chamber by a professional fan. The air is evenly distributed to the chamber by a perforated pipe in order to dry the specimen evenly.
We offer a variety of table top models with a chamber capacity of 300 L and 400 L as well as 1000 L cabinets for conducting of tests requiring:
Condensation atmosphere with constant humidity
persuant to ISO 6270-2 (CH)
Condensation climate with alternating humidity and air temperature persuant to ISO 6270-2 (AHT)
Condensation climate with alternating air temperature
persuant to ISO 6270-2 (AT)
|
|
400 L Professional cabinet CON 400-S A-KES to conduct fully automatic Kesternichtests persuant to ISO 6988
This cabinet is equipped with the working system water condensation „CON“ with CTD System and the working system „AIR“ and provides best climate conditions for conducting water condensation and Kesternichtests. Please note that the water is only heated up by the heaters below the water bath. As we do not apply any circulating pump the surface of the water remains quiet. This is essential concerning the absorption of the SO2 comparable to the climate in manually operated Kesternich chambers.
The SO2 is measured by an advanced massflowmeter and monitored by the SUPPLIERS OF PLC which controls the complete test procedure.
The CON 400-S AKES cabinet meets high requirements of safety and convenience. If necessary an extension by installing the working system “SAL” salt spray is possible, thus fully automatic cycling corrosion tests can be carried out.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
The Rousseau mobile professional cabinet is one of the safest on the market
It is very easy to modify the configuration of the cabinet; drawer order can be changed at any time
Polyurethane industrial casters with high quality rolling systems make moving the cabinet easy and do not leave marks
For a personalized configuration, contact a customer service representative |
|
Mobile Storage Professional cabinets
5-Drawer 79-Compartment Shallow Depth Mobile Storage Cabinet
5-Drawer 127-Compartment Extra-Wide Shallow-Depth Mobile Storage Cabinet
4-Drawer 100-Compartment Standard Mobile Storage Cabinet
8-Drawer 142-Compartment Shallow-Depth Mobile Storage Cabinet
8-Drawer 220-Compartment Extra-Wide Shallow Depth Mobile Storage Cabinet |
|
we serve for supplying high quality products with wide colors in accordance with a requirement from the user.
we also serve for supplying high quality product with a silk screen and letter embossing by a requirement from the user.
Also, all of HIBOX's products are waterproof and dust-free. (IP 66~67, NEMA 4X) The enclosures dimension is from 50X65X55 to 600X800X280 mm and DSE HIBOX has 400 kinds of products according to the material and size. Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com |
|
| production of handles for cardboard boxes with polypropylene and cardboard handgrips. available in various colours, they are completely ecological with high values of weight resistance. Patented |
|
| ... products without technical information |
| |
|
|
see the results for the following category
