|
|
Darwin: the innovation friend of the environment!
Thanks to Darwin, the air filter, that mounted on machine tools, cleans the air in work places, Losma has been among the marked companies to the prize the Innovation friend of environment 2002.
The event has been promoted by Legambiente, co-promoted by the Polytechnic of Milan and the Bocconi University, with the contribution of Confindustria and the sponsorship of the Lombardy Region and the Ministry of the Environment and the Protection of the Territory.
This acknowledgment rewards the engagement of the companies for continuous research and development of innovations compatible with the environment.
From the 1974 Losma operates in the field of the air filtering in industrial workplaces, with the maximum attention to the topics of the emergency and of the protection of the environment inside of the job places.
The Darwin air filter, patented, has been marked as personalized system, careful to the reduction of the energetic consumptions for the aspiration and cleaning of the air from oil fogs of machine tools.
|
|
All models in the air filter series can be coupled to special units that provide real and proper superfiltration. Their use permits many permutations and gives performance levels of up to 99.97% efficiency. These special units can be added at any time, even after the installation of the air filter. Guard: pre-filter for oil mist with swarf. Synthesis: electrostatic after-filter for smokes. Clipper: cartdrige after-filter for micro-mist. Microfilter: activated carbons after-filter for bad/hazardous odours.
|
|
Air filter for mists and vapours from soluble or neat oil for machine tools.
The DARWIN series, patented and available in 4 models, covers throughput range of 600 to 3.000 m³/h. This means that it can cope with widely differing applications, from small lathes to grinding machines or complex machining centres.
Darwin with turbine (T): filtration of air containing soluble oil mist with the presence of heavy particulate.
Darwin with single-centrifuge (M): filtration of air containing mists of soluble and neat oils with presence of small quantities of particulate.
Darwin with double-centrifuge (D): filtration of air containing mists and vapours of soluble and neat oil with presence of small quantities of particulate. |
|
Gemini represents the perfect solution for all cases where the customer in little spaces has the need of both a pre and post-filtration.
Thanks to the compact shape, Gemini adaptes very easely to all type of machine tools.
Gemini is supplied with a prefiltration stage and another filter with specific efficiency depending on the needs of the customer (>95% or >99,95% - Norms CEN EN 179/1822).
GEMINI has a particular design, already patented, which makes maintenance operations and filters replacement very easy.
Gemini is really customizable in fact it is possible to have different combinations of filters depending on the desired efficiencies and maintenance intervals even after the first installation.
|
|
The DELTOLE® is an oil mist collection unit which purifies and cleans the air in
working areas, decreases fire risk hazards and operator accidents and increases
productivity. It is especially recommended for all metal processing applications.
OPERATING PRINCIPLE
The DELTOLE® uses 4 fundamental principles to trap oil particles :
• The oil mist is separared by the fan impellor or by a cyclonic
system which allows the majority of oil particles to coalesce.
• The inertia force ensures that the droplets formed in this way are
retained and then migrate to the collection tank through a wire
knit filter.
• The diffusion forces with “Brownian” motion deal with the very
fine particles by means of a high efficiency filter used as an
option instead and in place of the last standard final filter.
• For use without recycling, a multi-layer wire knit filter can be
substituted for the final filters. The oil collected by the filter is
continuously evacuated by means of a siphon. |
|
Purifies the air in working environments in which blankets of oily smoke are created.
Mechanical industries, machine-tool environments. |
|
The oil mist separator for tough applications
Petra is specially designed to handle applications having high degree of solid particles, such as grinding and polishing applications, machining of cast iron and heat treatment (quench oil) applications.
Petra has a capacity of 700 cfm (1,000 m3/h) and can easily be installed on the top of the machine tool it is suitable for most machine tools. This saves floor space and unnecessary pipe work and unnecessary maintenance on pipe, which is quite important in these types of applications, where allot of solid particles deposits in the pipes. It also makes it easier to move the machine tools when production requirements change. |
|
Lina is the smallest oil mist separator in the 3nine product family. It was specially designed for small, enclosed machine tools, where the need for extraction vacuum is limited.
Lina has a capacity of 350 cfm (500m³/h) and is mounted on each machine tool. This saves floor sopace and unnecessary pipe work. It also makes it easier to move the machines when production requirements change. |
|
Clara is 3nine's best-selling oil mist separator. With a flow rate of 700 cfm (1,000 m³/h) it is suitable for most machine tools. Clara has been fitted to practically every type of machine tool for numerous customers in Sweden and elsewhere in Europe.
Clara operates solely on the centrifugal separation principle and therefore requires very little maintenance. Clara does not clog up like a filter - even under extreme conditions with high solids loading, such as the machining of casing and in grinding applications. |
|
Emma is the big sister in the 3nine product family. Emma was designed specially for applications where a high air flow is essential, for example on very large or open machine tools.
Emma has a capacity of 1800 cfm (3000 m3/h). Multiple Emma's can be interconnected using the 3nine modular system to create a solution for flow rates above 1800 cfm (3000 m3/h). |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
'The Mammoth' vacuum collection unit
High Powered Heavy Duty Industrial Vacuum Cleaning & Bulk Collection Solution for industries with the most demanding clean up problems. High vacuum and airflow provide the strength to clean up the most inaccessible areas quickly, with minimum labour and in an economically effect.
Working as the heart of fixed pipe work systems in heavy industries such as Iron & Steel, Cement, Power Generation, Quarries etc the Mammoth provides the power to enable multiple operators to work simultaneously.
On a large site, with long conveying distances, or where cross contamination of products is to be avoided, shorter, dedicated pipe runs can be employed.
Available options
• Power units from 7.5 to 150kw
• Electric, Diesel, LPG engines
• Acoustic enclosure for noise reduction
• ATEX compliant models
• Support frames, access and service platforms
• Skid/ Truck or Trailer mounting
• Wide variety and sizes of hoppers including self-tipping
• Dump, slide, rotary valve hopper discharge options
Clyde Materials Handling engineers can also design custom specific requirements.
For further details please see: www.clydematerials.com
|
|
|
|
