|
|
|
The Millennium is a versatile, high-performance dust collector that has been designed to meet the needs of most industrial applications. The Millennium offers a flexible design that reduces freight and erection costs, fits tight quarters, and is easy to install and service. Available in two sizes, the self-cleaning modules can accomodate up to 144 fabric bags each, at bag lengths of 8, 10, 12, or 14 feet. Since the Millennium is modular in design, there is almost no limit to the size of the collector. Common optional features available with the Millennium include pleated bags, pressure demand cleaning, NEMA 9 controls, explosion vents, inlet adaptor plates, a walk-in plenum, high temperature options, and various ancillary components.
|
|
|
|
|
|
Technical specifications:
Prefilter: 20 liters.
Maximum static pressure: 3,2 kPa
Maximum airflow: 15 m3/min
Control panel: filter saturation, overheating and overloading indicators, 7 speed levels of suction.
Synchronization plug for connection with other applications.
Dimensions (mm) : 450 (L) x 531,5 (W) x 929 (H).
The SKV-900AT-HC-V1-CE is a dust compact and powerful dust collector with a suction capacity of 15 m3/min. Its prefilter of 20 liters allows an efficient management of dust and voluminous particulates important emissions. A shaking lever ensures a filter longer lifetime.
A special filter replacement avoids any particulates leak in the air. Filtration rate reaches 99,97 % for particulates ≥ 0,3 µ thanks to a HEPA final filter.
A control panel favors a more precise use of the machine through a speed regulator with 7 levels, light indicators for filter saturation, risk of overheating and anomalies. Likewise, a synchronization plug eases connection to other applications for a remote control.
Application domains: polishing, cutting, drilling, screwing, sharpening… and cosmetic, pharmaceutical and food powder.
Unusable for toxic gas, liquid, explosive, corrosive an abrasive substances.
|
|
ArrestAll
The AAF ArrestAll self-contained dust collector is a shaker-type fabric collector that removes over 99% of general industrial dusts by weight. The ArrestAll is economical to operate, simple to maintain, and requires minimum floor space. Designed to serve a single source or a system of multiple sources, it saves energy by recirculating clean air.
The ArrestAll has been engineered for years of efficient service in such intermittent applications as woodworking, grinding, polishing, packaging and venting with reliable off-line cleaning. It is available in modular configurations for almost unlimited airflow capacities. Choose from bin vent, flat bottom, or funnel bottom dust disposal arrangements, with either standard or extra wide pocket spacing. An automatic shaker is standard on sizes AR1-3 to AR6-25.
|
|
Donaldson® offers a complete line of dependable, rugged bag collectors to keep your processing operation running smoothly. Bag collectors have been used for industrial dust collection for over 50 years, providing a full range of solutions from nuisance dust to extremely heavy dust loads along with bin venting and product reclaim.
Unimaster® Collectors
The Donaldson Unimaster® dust collector is an economical and effective solution for a diverse range of nuisance dust problems. The Unimaster® is a compact shaker-type, intermittent duty collector with a wide variety of configurations and filter bag materials to suit many applications.
|
|
The Design M FabriPulse pulse-jet fabric dust collector meets the needs of industrial dust collection applications that have low air volume and require small, compact filter sizes. It is engineered to give years of efficient service and minimum downtime for continuous operation.
The Design M collector is built with rugged 12-gauge construction and efficient pulse-jet reconditioning. The bag cartridge assembly consists of four or six foot long bags made from fine denier polyester media. This premium quality fabric enables a 99+% collection efficiency, high operating air-to-cloth ratio (up to 8:1), and excellent dust cake release at minimum pressure loss. Normally, less than 1.0 SCFM of clean, dry compressed air will be required for each 1,000 CFM of dust-laden air, with pressure drop ranging from 3" to 6" w.g. The Design M FabriPulse is available with an optional integral fan and/or final filter, as well as bin vent models for bins and silos.
|
|
|
|
|
|
As HERDING continues to develop filter elements and units which do not contain an ignition source, the company has accumulated extensive theoretical and practical experience in the field of fire prevention.
HERDING contributes its expertise to a variety of organizations including the Association of German Engineers (VDI), the German Engineering Federation (VDMA) and the German Insurance Association (GDV). HERDING also shares its expertise in handling flammable and explosive dust with companies that use filter units.
In addition to ATEX-compliant filter units, HERDING also offers a filter system analysis service to review customer compliance with ATEX requirements. HERDING assesses the systems on site, provides customer training and generates an explosion protection document based on German occupational safety regulations (BetrSichV). HERDING performs a risk assessment including zone and ignition hazard analysis and generates an appropriate preventive, design and organizational action plan. Why not contact us? We would be please to advise you.
|
|
The Absolent TSF is well suited for use in applications where dry dust is generated:
• Welding
• Laser cutting and plasma cutting
• Grinding and polishing
|
|
|
the DC line of dust collection systems utilize high capacity filter bags and a powerful blower to remove dust and particulates from the blast chamber of your blaster. A manual shake down mechanism is supplied to remove dust.
|
|
|
|
|
|
Clyde Materials Handling has developed a wide array of MAC Equipment air/dust filtration technology which can be applied to tackle any process filtration challenge. For more details contact Richard Sims, Managing Director – Industrial Process Technologies on 01302 321313 or visit www.macequipment.co.uk
MAC Pulse Jet filters can be used in a wide variety of air filtration applications. Depending on the configuration, they can be used as the filter in a dust collection system or as the product receiver in a pneumatic conveying system. Filters can also be equipped with a HEPA high efficiency filter on the clean air exhaust where the air is being reintroduced into the work environment. For lower energy consumption, medium pressure cleaning options are also available.
The MAC2Flo has large square footage of media per cartridge allowing for increased air flow with no increase in pressure drop. Dust-laden air enters the top of the filter, which provides a true downward airflow resulting in increased cleaning efficiency.
The MAC Medium-Pressure Controlled-Cleaning Dust Filter (MCF) is the most efficient and versatile bag filter made. Capacities range to over 250,000 CFM with over a dozen filter media options available. MCF Dust Filter combines superior consistent cleaning performance with major energy savings. Each round filter bag is cleaned only once per cycle to optimize bag life and pressure drop.
A full range of replacement filter bags in a variety of medium, cages and filter cartridges can be supplied.
Components are sold as stand-alone units. Some of these components are also used in Pneumatic Conveying systems to filter process dust from the air stream.
|
|
|
|
|
|
As HERDING continues to develop filter elements and units which do not contain an ignition source, the company has accumulated extensive theoretical and practical experience in the field of fire prevention.
HERDING contributes its expertise to a variety of organizations including the Association of German Engineers (VDI), the German Engineering Federation (VDMA) and the German Insurance Association (GDV). HERDING also shares its expertise in handling flammable and explosive dust with companies that use filter units.
In addition to ATEX-compliant filter units, HERDING also offers a filter system analysis service to review customer compliance with ATEX requirements. HERDING assesses the systems on site, provides customer training and generates an explosion protection document based on German occupational safety regulations (BetrSichV). HERDING performs a risk assessment including zone and ignition hazard analysis and generates an appropriate preventive, design and organizational action plan. Why not contact us? We would be please to advise you.
|
|
|
|
|
|
Gold Cone® Filters
Gold Cone
The exclusive and patented Gold Cone in the center of the cartridge offers benefits unavailable from any competitive filter cartridges.
* Expanded capacity due to the patented inner cone of filtration media.
* The inner cone provides uniform dispersion of back-pulsed air and opens up more usable space for airflow in the dust collector.
* Farr's PolyTech™ media is the most advanced pulse-cleaned media ever made.
* All Farr filter media offerings deliver a minimum of 99.999% separation efficiency down to 0.5 micron by weight.
* Continuous double seal gaskets give added insurance against leaks. No other filter design gives you a double seal barrier.
* HemiPleat® filter technology ensures uniform pleat spacing with synthetic beads that hold the pleats of the filter cartridge wide open.
Reverse Pulse Cleaning
* Featuring an injection-molded inner cone in the center of the cartridge, cleaning is accomplished by pulse waves that emanate outward from this inner cone providing advanced cleaning for more efficient operation, longer cartridge life and reduced service requirements.
* Test results indicate that this new pulse distribution method provides enhanced cleaning.
|
|
Fan cleaned filter-FCF is designed to tailor to special dust concentration and characteristic to serve Hygiene, paper and tissus industries. FCF filter is cleaned automatically according to design PLC setting by using fan. Unlike other bag house filters which normally used compressed air to clean its medias, FCF is using fan to clean its media which helps save energy.
FCF is CE Marked and complies to ATEX safety standard. It is delivered with 2 years part garantees. FCF is tested and in commercial operation with our global hygiene partner and delivered to its factory worldwide.
|
|
Because of some machining processes, the air of industrial environments may be full of polluting agents, as various dust and motes, harmful for health of working people and non-conforming with the relevant standards.
The company Savio S.r.l., ever-sensitive to and in the van of the solution of such problems, has studied and manufactured SQUARE FILTER which, being particularly compact and having high filtering surface/volume ratio, is widely used in chemical / foodstuff /metallurgy industries, in the field of ceramic production as well as in silos, mills, screens, mixers, etc...
|
|
The new and compact DELTAFlex design enables the end user and the operating company flexibility with a small foot print, particularly when large air flows are of concern.
The filter elements are mounted vertically and depending on the application, the filter unit will be equipped with DELTA- or DELTA²-filter elements.
The safety concept and the unit design following the ATEX-safety regulations will follow your needs.
|
|
Jet pulse cleaning bag house filter-model TSF
TSF is designed to handle various kind of air dust in many industries including metal,casting,automobile, powder chemical, powder detergents. TSF has been tested over many years with global leading companies around the world. TSF is with CE Marked and complies to ATEX saftety standard including 2 years part garantee.
With our extensive erfarenhet and many various project scales deliveries around the world can ensure our customers the high Swedish quality standard and technologies at target desired budget.
|
|
Since the early 1980s WAM® have developed a unique range of compact Dust Collectors that meets the requirements of every user.
Today WAM® offers a comprehensive Dust Collector range for de-dusting and dust control for virtually all industrial applications.
|
|
|
|
|
|
DM Series – Shaker Bag Dust and Dust/Fume/Smoke Systems
AER Borne Environmental Systems DM Series modular dust Collection systems are designed to provide efficient, cost effective control of dust, fume, smoke and gas/vapor contaminants generated from a variety of manufacturing and process applications. Standard units are designed for floor or machine mounting with other options available (consult factory). Optional hopper kits are available for additional dust storage capacity with standard 5 or 55 gallon drums. Units are also available in portable models and in a small downdraft table option. A full line of accessories and options are available to simplify unit installation.
As with our other collection systems, the DM Series modular design provides the ultimate in unit filtration flexibility or adaptability enabling them to handle a variety of airborne contaminants. Modular design allows for simple integration of additional filter modules allowing the collectors filter stages to be easily customized to meet the exact filtration requirements of the application. Should contaminants change due to process changes, filter modules can be easily added and/or existing ones altered to adapt to the changing conditions.
|
|
|
|
|
|
Shaker Collectors
If your application permits intermittent operation, consider a Sly Shaker collector, which is simple to operate and maintain. Filtering velocities are low, which provides uniform dust distribution and long bag life. Accumulated dust is intermittently shaken off filters while air flow is temporarily interrupted. Capacities to 4000 CFM.
The Pactecon Model S is an economical baghouse design engineered specifically for dust collection applications where it is practical to shutdown the process periodically for filter cleaning. A shaker device effectively breaks the dust cake and cleans the bags. Dust collection filters are shipped with a hand operated shaking device or optional motorized shaker. Solid state timers for control of the shake cycle are available as options. Using either method, it is recommended that the entire filter bank be shaken for 1 or 2 minutes at 4 to 8 hour intervals.
Highlights
- For non-continuous use
- Low initial cost, low operating cost
- Compact
- Maximum efficiencies
- Up to 4,000 CFM, temperatures to 275°F
|
|
Auto M shaker filter
The Auto M Z-Series is the latest generation of robust simple mechanically cleaned dust collectors suitable for non-continuous duty for industrial, commercial and educational locations.
Key features
• Neat, compact, unobtrusive, easy to clean exterior
• Robust weatherproof welded steel construction
• Electric shake cleaning, perfected by 30 years' experience
• No need for compressed air
• ATEX certified Baseefa 03 ATEX0225 for explosive dusts
• Simple maintenance, access from clean air side
• Many options including secondary filters to increase versatility.
Typical applications
• Metalwork, grinding, fettling, sanding, polishing
• Woodwork, dust extraction from small and medium workshops
• Bulk powders, chemicals, sack tipping, weighing, bagging
• Educational workshops – ceramics, metal work, crafts, woodwork,
|
|
|
The BDC Series of dust collectors are ideal for industrial processes such as bin venting and raw material handling. Compact in size, this baghouse-style system can be installed inside or outside; while minimizing the occupation of valuable floor space and offers easy access for filter maintenance.
|
|
FT40SV
40 Cotton Sateen Filter Tubes.
Filtering Area 400 sq. ft.
Shipping wt. 906lbs
AGET silo vents are installed directly on the silo or bin, where collected dust trapped in the filters falls back into the bin when the tubes are shaken. Dust-laden air created by loading of the silo is filtered and exits from a weather protected bird-proof outlet. Motorized filter shakers less controls are standard. Exhausters can be included (see below) to relieve system back pressure and create a negative pressure in the bin. See "Pull-Through" filters for specs. Larger models and optional filter fabrics are available.
|
|
|
The L-CUT series has been specially developed for the collection of dust and fumes caused by thermal processes such as joining, separating, or surface treatment by laser, plasma or gases, to separate the finest of metal oxide particles. These units are compact and have a very low profile. Therefore, they can be installed in tight spaces. The spark pre-separator KSE is already integrated in the housing.
|
|
|
|
|
|
The W&S Series require that users enter through a side access door in order to change the filter mediums inside the dust collector. It is Airex’s first generation of baghouse collectors.
The dry fabric filter is by far the most efficient and the most reliable compared to numerous other air pollution control devices. Unlike other filtering methods, variations in dust loading or air volume will not change the outlet conditions of a well-designed dry fabric collector. The pulse jet system outperforms conventional dry fabric filter units since it allows the use of highly efficient felt filter fabrics.
Using top quality needle felt media of appropriate weight and construction enables maximum filtering efficiency to be attained. A full range of natural and synthetic felts is available to meet your specific requirements: Fibreglass, Polyester, Nylon, Nomex, etc. All bags are accessed from the side entry of the collector for servicing.
ADVANTAGES
- Operates at high temperatures (special bags required)
- Maximum filtration can be obtained through selection of certain items that include bag types, can velocity, collector shape and arrangement.
- Steel internal cage supports are used to keep the bag form.
- No tools are required to remove the bags.
- Quick-clamps hold the bags in place
- Standard cages and bags are easily available on the market
- Large loading capacity
- Easily pulse cleans sticky and stringy materials
- Resists chemical products
- Resists humidity
- Stable pressure differential
- Energy recovery
- Maximum efficiency
- Adjustable pulse jet cycle
- Side access
- Can operate at High temperatures up to 800˚F (special bags required)
- NFPA Construction
|
|
This filter unit has been designed for special dust filtration in the lacquering, composite material and fibreglass-reinforced plastic machining industries. The components used in this unit ensure high filtering capacity to comply with the strictest air filtration on the workplace standards.
Maintenance requirements are reduced to a minimum thanks to filter cleaning controlled by a special control unit, which preserves the machine filtering power by checking in real time the pressure difference upstream and downstream from the filters. Cleaning is carried out via a counter-flow compressed air jet amplified by the action of a Venturi cone. Using this electronic control unit reduces the compressed air requirements to a minimum, as cleaning is only carried out when the filters are actually in need of cleaning. The only required opera
|
|
|
|
|
|
Heavy-Duty Dust Collection
The continuous duty bag dust collector for those applications where cartridges will not work. The Bagtron comes in a full range of sizes, from 67 sq. ft. to 1750 sq. ft. of filter, thus giving CFM's of air moved from as low as 500 CFM and as high as 25,000 CFM. In addition custom / larger sizes are available.
Self Cleaning While Running
Online cleaning is accomplished by a solid state control board which sequentially energenizes solenoids, allowing diaphragm valves to dump compressed air from the storage header into the blow-down pipe. The blow-down pipes have orifices over the inlets of each bag. The primary air is then joined by secondary air in the clean chamber both to flex the bag, cracking the dust cake, and also to blow off the loosened dust. The large agglomerated dust particles will then fall to the hopper for discarge from the collector. The compressed air jet is processed through a Venturi before passing to the fabric of the bag.
Specifications
- 14 Gauge with ribs
- Magnehelic gauge
- 16 oz. singed polyester felt
- Internal Venturi
- Galvanized bag cages
- Nitro blue enamel
- 4.75" Dia bags - 6, 8, or 10 ft. long
Options
- Direct mounted blower/motor
- Volume control damper
- Fan silencer
- Bin vent design
- Rotary air lock
- Platform & ladder packs
- Explosion vents
- Photohelic gauge
|
|
|
|
|
|
|
The filter type FBI is a filtering unit with a counter current cleaning system employed to separate pulverized solid products, which are suspended in the air or in other gaseous products. The filter is equipped with a tank to accumulate pressurized air and the sleeves' cleaning system, both contained inside the filter body. The cleaning system is controlled and managed by a cyclic electronic timer with a ?P incorporated. The filter is supplied with the work and pause sequences programmed and may be reprogrammed according to the client's requirement. It is also equipped with a three digit display to visualize the inlet differential pressure. The efficiency of the filter type FBI is within the values prescribed by the current anti-pollution italian law (d.P.R. 203/88). Its construction is also in conformity with european directive and italian law (d. Lgs. 277/91) On noise reduction in the working environment. The filter shape is cylindrical with the sleeves' extraction from the top. Its engineering is a result of the research and experience in the dry filtering with the use of sleeves and optimization of space in the plants. The air-product mixture is suctioned in the filter. The heavier product particles drop to the bottom by gravitational force whilst the lighter rise to the top and are filtered by the filtering sleeves wich are supported by steel frames. All filters may be executed in carbon steel, stainless steel Aisi 304 or Aisi 316, and aluminium.
|
|
Compressed air self-cleaning bag filters BAG COMPACT Polluted air enters the filter through a pre-chamber which enables separation of rough particles; the flow then goes through the bags, depositing the contaminant outside, while clean air is discharged from filter head. An electronic sequential cycle provides for bag cleaning by compressed air.
APPLICATIONS
- Dry processing on machine tools
- Chemical processing
- Pharmaceutical processing
- Plastic material processing
- Grinding
- Sandblasting
- Silo breathing
- Marble cutting
- Plasma cutting
|
|
|
|
|
|
The VARIO series is particularly suitable for the separation of fine dust. Nearly all types of dust can be successfully separated, such as those created in metal processing, polymer processing, and in chemical, pharmaceutical and ceramic industries, as well as non-metallic minerals.
The VARIO units are of modular construction in order to meet
different requirements, such as dust characteristics or the volume of exhausted air. Sturdy and low-noise units allow for problem-free 24-hr. operation with constant air flow. Short delivery times and competitive pricing are possible because of series production planning
Filter elements
The SINBRAN filter elements, a combination of sintered polyethylene and laminated GORE-TEX® membrane, combine the advantage of membrane filtration (low pressure loss with high filtration efficiency) with a long-life rigid frame construction. These elements are reusable, have BIA test certification according to DIN EN 6035-2-69 Appendix AA (08/99) and meet the requirements of dust class "M", formerly known as categories U, S, G and C. Alternative filter elements such as cartridge filters and Y-filters are also available.
|
|
|
|
|
|
Keller Lufttechnik plans, engineers, and manufactures air
pollution control systems for the capture, separation and removal of airborne particles for all types of industry. High filtration efficiency is achieved with innovative filtration technology and efficient design. Suitable exhaust systems offer solutions to individual applications while maintaining high quality standards.
The JET-SET series is especially suitable for the separation of high-volume fine dust particles. Nearly all types of dust can be successfully separated, such as those created in metal
processing, polymer processing, recycling industry, timber industry as well as non-metallic minerals.
The JET-SET units are modular in design in order to meet
different requirements, such as dust characteristics, dust
accumulation or the volume of exhausted air. The quiet units maintain a constant air flow, allowing for a trouble-free
24-hour operation. Short delivery times and competitive
pricing are achieved through series production planning.
|
|
SANTONI offers a wide range of highly efficient "Stand-alone" dust collection systems for extracting any type of dust generated by any process - such as grinding operation of any nature.
Specially designed suction hoods, in addition to several other features make these dust collectors exceptionally efficient
Features:
- High efficiency dust collectors
- Large fine filters
- Cyclone pre-filter
- Low dust loading of the main filter
- Filters do not clog
- Special manual / automatic filter cleaning devices (DC-series)
- High suction is maintained over long hours of use
- Special dust disposal facilities available
- Low noise options available
|
|
|
|
