|
|
|
The Millennium is a versatile, high-performance dust collector that has been designed to meet the needs of most industrial applications. The Millennium offers a flexible design that reduces freight and erection costs, fits tight quarters, and is easy to install and service. Available in two sizes, the self-cleaning modules can accomodate up to 144 fabric bags each, at bag lengths of 8, 10, 12, or 14 feet. Since the Millennium is modular in design, there is almost no limit to the size of the collector. Common optional features available with the Millennium include pleated bags, pressure demand cleaning, NEMA 9 controls, explosion vents, inlet adaptor plates, a walk-in plenum, high temperature options, and various ancillary components.
|
|
|
|
|
|
Clyde Materials Handling has developed a wide array of MAC Equipment air/dust filtration technology which can be applied to tackle any process filtration challenge. For more details contact Richard Sims, Managing Director – Industrial Process Technologies on 01302 321313 or visit www.macequipment.co.uk
MAC Pulse Jet filters can be used in a wide variety of air filtration applications. Depending on the configuration, they can be used as the filter in a dust collection system or as the product receiver in a pneumatic conveying system. Filters can also be equipped with a HEPA high efficiency filter on the clean air exhaust where the air is being reintroduced into the work environment. For lower energy consumption, medium pressure cleaning options are also available.
The MAC2Flo has large square footage of media per cartridge allowing for increased air flow with no increase in pressure drop. Dust-laden air enters the top of the filter, which provides a true downward airflow resulting in increased cleaning efficiency.
The MAC Medium-Pressure Controlled-Cleaning Dust Filter (MCF) is the most efficient and versatile bag filter made. Capacities range to over 250,000 CFM with over a dozen filter media options available. MCF Dust Filter combines superior consistent cleaning performance with major energy savings. Each round filter bag is cleaned only once per cycle to optimize bag life and pressure drop.
A full range of replacement filter bags in a variety of medium, cages and filter cartridges can be supplied.
Components are sold as stand-alone units. Some of these components are also used in Pneumatic Conveying systems to filter process dust from the air stream.
|
|
|
|
|
|
As HERDING continues to develop filter elements and units which do not contain an ignition source, the company has accumulated extensive theoretical and practical experience in the field of fire prevention.
HERDING contributes its expertise to a variety of organizations including the Association of German Engineers (VDI), the German Engineering Federation (VDMA) and the German Insurance Association (GDV). HERDING also shares its expertise in handling flammable and explosive dust with companies that use filter units.
In addition to ATEX-compliant filter units, HERDING also offers a filter system analysis service to review customer compliance with ATEX requirements. HERDING assesses the systems on site, provides customer training and generates an explosion protection document based on German occupational safety regulations (BetrSichV). HERDING performs a risk assessment including zone and ignition hazard analysis and generates an appropriate preventive, design and organizational action plan. Why not contact us? We would be please to advise you.
|
|
|
|
|
|
Gold Cone® Filters
Gold Cone
The exclusive and patented Gold Cone in the center of the cartridge offers benefits unavailable from any competitive filter cartridges.
* Expanded capacity due to the patented inner cone of filtration media.
* The inner cone provides uniform dispersion of back-pulsed air and opens up more usable space for airflow in the dust collector.
* Farr's PolyTech™ media is the most advanced pulse-cleaned media ever made.
* All Farr filter media offerings deliver a minimum of 99.999% separation efficiency down to 0.5 micron by weight.
* Continuous double seal gaskets give added insurance against leaks. No other filter design gives you a double seal barrier.
* HemiPleat® filter technology ensures uniform pleat spacing with synthetic beads that hold the pleats of the filter cartridge wide open.
Reverse Pulse Cleaning
* Featuring an injection-molded inner cone in the center of the cartridge, cleaning is accomplished by pulse waves that emanate outward from this inner cone providing advanced cleaning for more efficient operation, longer cartridge life and reduced service requirements.
* Test results indicate that this new pulse distribution method provides enhanced cleaning.
|
|
Fan cleaned filter-FCF is designed to tailor to special dust concentration and characteristic to serve Hygiene, paper and tissus industries. FCF filter is cleaned automatically according to design PLC setting by using fan. Unlike other bag house filters which normally used compressed air to clean its medias, FCF is using fan to clean its media which helps save energy.
FCF is CE Marked and complies to ATEX safety standard. It is delivered with 2 years part garantees. FCF is tested and in commercial operation with our global hygiene partner and delivered to its factory worldwide.
|
|
Because of some machining processes, the air of industrial environments may be full of polluting agents, as various dust and motes, harmful for health of working people and non-conforming with the relevant standards.
The company Savio S.r.l., ever-sensitive to and in the van of the solution of such problems, has studied and manufactured SQUARE FILTER which, being particularly compact and having high filtering surface/volume ratio, is widely used in chemical / foodstuff /metallurgy industries, in the field of ceramic production as well as in silos, mills, screens, mixers, etc...
|
|
FT40SV
40 Cotton Sateen Filter Tubes.
Filtering Area 400 sq. ft.
Shipping wt. 906lbs
AGET silo vents are installed directly on the silo or bin, where collected dust trapped in the filters falls back into the bin when the tubes are shaken. Dust-laden air created by loading of the silo is filtered and exits from a weather protected bird-proof outlet. Motorized filter shakers less controls are standard. Exhausters can be included (see below) to relieve system back pressure and create a negative pressure in the bin. See "Pull-Through" filters for specs. Larger models and optional filter fabrics are available.
|
|
|
The L-CUT series has been specially developed for the collection of dust and fumes caused by thermal processes such as joining, separating, or surface treatment by laser, plasma or gases, to separate the finest of metal oxide particles. These units are compact and have a very low profile. Therefore, they can be installed in tight spaces. The spark pre-separator KSE is already integrated in the housing.
|
|
Baghouse Filters
Increasing demand for a cleaner environment and requirements for lower particulate emissions from the manufacturing processes, result in baghouse air filters being widely used in resource industries. In principle, baghouses are industrial-sized vacuum cleaners. The difference between a baghouse and a household vacuum is the need to continuously remove dust while the baghouse is in operation.
The cleaning mechanisms have been developed over the past 50 years. Early developments used shaker and reverse air systems, while newer baghouse designs use a PulseJet cleaning system (using compressed air) or a High-Energy PulseAir system (using a displacement blower) for cleaning air. Side-by-side comparisons prove baghouses using High-Energy PulseAir are more efficient, deliver the cleanest results and prolong bag life.
|
|
|
Modular filter units are fastened to each others, thus the demanded air capacity is obtained. Operated on surface filtration principle. Different filters which are selected according to inquiry are homogenously cleaned by pressured air as automatically.The units filter the dust and emulsions as collecting.
|
|
|
Allied has built thousands of cyclones for various applications. Standard efficiency cyclones are used where baghouse filters are required to cope with emission standards. High efficiency cyclones are used as primary separators and air cleaning devices in many applications. High-pressure cyclones are used as receivers in pneumatic conveying systems. All cyclones have different design requirements and they are custom made for each application
|
|
|
For flue gas cleaning for wood burning combustion systems Allied co-operates with Southern Environmental (SEI) to supply and install dry precipitator (ESP) systems.
|
|
|
Wet electrostatic precipitator (WESP) systems are recognized as the most reliable devices for removal of sub-micron sized solid particles and liquid droplets form the gas stream. The down-flow/up-flow WESP-2F is the most efficient and reliable WESP when dealing with heavy loading of solid and sticky particles and eliminating carry over of fine mist and droplets.
|
|
| ... products without technical information |
| |
|
Plastics attract dust due to static electricity. The dust particles stick firmly to the surface, which makes it difficult to remove them. Due to their configuration, numerous plastic products have to be neutralised from a distance. For this purpose, SIMCO has developed ionising air blowers. The emitter points of the anti-static bar ionize the air which is blown towards the electrostatically charged object. The part is then neutralised by the ionized flow.
|
|
|
|
|
|
The Model 212v2 Benchtop Ioniser is a compact unit which complements the Meech Series 200 product range. The Model 212v2 provides excellent work station coverage and a high level of ESD protection. It has been specifically designed to meet the demanding performance requirements in applications such as: ·Semiconductor manufacture · Electronics assembly & testing · Test and re-work · Optics, contact lenses & fibre optics · Medical device manufacture & packaging · Wave soldering
Features
Removable pins Easy to clean and replace. Minimum maintenance downtime.
Balance ionisation (typical) +/- 10V Prevents possible ESD damage in sensitive electronic applications, reduces scrap and saves on replacement costs.
Two fan speed settings Can be set for optimum operator comfort and ionisation range.
Dirty pin indicator and audible alarm Particularly important in applications where balanced ionisation is key to prevention of ESD damage to components. Also, informs the operator when maintenance is required (emitter pin cleaning).
Small footprint Takes up little room, allowing more space for operators' work activity.
|
|
|
|
|
|
The Model 935 Ionising Blower provides effective long range ionisation over a large area. Its versatility makes it suitable for a wide range of industrial applications. The Model 935 comprises an ionisation head and an integrated fan system. A high volume flow of ionised air is generated by blowing air through the ionisation head at the mouth of the unit. Ionisation is provided by powerful 915 bars, generating an ionised field to a depth of up to 2000mm. The 935 unit is powered by the Model 904 (see separate datasheet) and is available in both 110V and 240V versions. Patent No. ZL200530000279.5
Features
Variable fan speed (option) Air flow can be adjusted to suit specific applications
Easy, flexible mounting Can be mounted on walls, benches, ceilings etc to suit a specific application
Large footprint Effective over a large target area
Ionisation provided by 915 bars Powerful ionisation with very fast decay times
Filter media (option) Ensures only clean air impacts the target area
Removable polypropylene grille Easy access for regular maintenance of ionisation head
Available in 200mm length increments Flexibility to optimise performance for individual applications
High volume air flow Provides highly effective long range ionisation
Resistively coupled ionisation head Shockless operation
|
|
The Meech Model 955 is a hand held ionising blow gun for removing static charges and dust in a range of industrial applications. The portable Model 955 has been designed to provide efficiency in both cost and performance. An electrical centrifugal fan provides high velocity air flow, avoiding the need for a costly compressed air supply. Ionisation is provided by titanium emitters located in the nozzle of the gun, powered by a high voltage DC source. The 955 requires just a standard single phase 240V supply, thereby making the unit fully portable.
Features
Small and compact. Easy to locate and install in confined spaces.
Only maintenance requirement is periodic cleaning around emitter pin. Easy maintenance and minimum downtime.
Flexible knuckle trunking extension Delivers ionisation precisely where it is needed. Effective in "difficult to reach" places.
"Stay put" knuckle trunking. Enables simple and quick installastion.
Rapid decay times Highly effective in sheer feeder applications.
|
|
|
|
|
|
Single Anti Static Blower
H&O Single Ionising Air Blower is designed for the neutralization of the static charges which cause some serious problems. High technology used in design can produce more efficient results for static electric problems even in high-speed applications. It provides high performance and efficient ionization with fast discharging time. Blower seperates air molecules to the positive and negative ions by the electric field it generates and transports them.
Any static charged product passed from the efficient distance of the Air Blower will draw the opposite charged ions and neutralize the product. This will prevent the sticking of products to other products or parts of machines.At the same time electrical shocks, explosions, fire danger and dust attraction of which is caused by static electric will be prevented.
Thanks to Air Blower which doesn't need any calibrations and can be cleaned and cared easily. Machines will perform hygienic, safe and high quality production with high performance without problems. There is one fan in Air Blower for increasing ionization distance and supplying enough air flow. System can be mounted to places which are hard to reach by the connection apparatus that is provided on the system. Blower filters should be cleaned occasionally.
|
|
|
Where air is required to affect static removal at a distance and compressed air is not available, the Ion Blower can be used with either the standard Model RN static bar or the extra powerful Model VS bar.
|
|
|
|
|
|
Dual Anti Static Blowers
H&O Single Ionising Air Blower is designed for the neutralization of the static charges which cause some serious problems. High technology used in design can produce more efficient results for static electric problems even in high-speed applications. It provides high performance and efficient ionization with fast discharging time. Blower seperates air molecules to the positive and negative ions by the electric field it generates and transports them.
Any static charged product passed from the efficient distance of the Air Blower will draw the opposite charged ions and neutralize the product. This will prevent the sticking of products to other products or parts of machines.At the same time electrical shocks, explosions, fire danger and dust attraction of which is caused by static electric will be prevented.
Thanks to Air Blower which doesn't need any calibrations and can be cleaned and cared easily. Machines will perform hygienic, safe and high quality production with high performance without problems. There is one fan in Air Blower for increasing ionization distance and supplying enough air flow. System can be mounted to places which are hard to reach by the connection apparatus that is provided on the system. Blower filters should be cleaned occasionally.
|
|
EXAIR static eliminators neutralize static electricity charges in a wide variety of industrial processes. Anti-static products eliminate static cling that causes dust attraction, jams and tearing. Materials such as paper, plastic and textiles normally contain an equal number of positive and negative charges - that is, they are electrically charged. This static charge causes the following problems:
* Dust clinging to product
* Product clinging to itself, rollers, machine beds or frames
* Materials tearing, jamming or curling
* Sheet feeding problems
* Hazardous sparks or shocks
|
|
|
Ionizing Air Blowers consist a static device and power source inside of housings of various shapes to create bi-polar ions. The blower acts as an extended range ionzier to move the ionization forward to charged surfaces and materials. Ionizing air blowers are ideal for solving static on plastic molded parts and webs.
|
|
Ionized air blower for static neutralization
ELCOWA's ECOBLOWER 350-C has been designed to efficiently remove static charges from a distance. It is built in a robust painted steel cabinet enclosing the high voltage power supply, tangential fan, and a blowing nozzle in which three shockless ionizating bars. The pivoting mounting bracket makes it easy to install and adjust. The ionization blower ECOBLOWER 350-C is a compact, self-contained unit ready for service. As the high voltage power supply is incorporated into the blower, there is no high voltage cable nor remote power supply, reducing electrical hazards.
|
|
|
Kinney KC & KTC Series Multi-stage rotary piston vacuum pumps provide pumping speeds of 5-112 CFM (8-190 m³/h) with ultimate pressures of 0.2 milliTorr (0.027 Pa). Our KTC series vacuum pumps include our exclusive triplex piston design to eliminate vibration.
|
|
|
KINNEY rotary piston vacuum pumps provide vacuum levels to 0.2 milliTorr (0.027 Pa) with long operating life. Our triplex piston designs are inherently balanced to eliminate vibration.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
