loading in progress... Please wait

Alignment system :

706 industrial products

60 products in		Alignment systems
3 products in		Positioning and micro-positioning tables
1 products in		Conveyor monitoring
10 products in		Other ground conveyors
5 products in		Acoustic measurement instruments, Vibration measurement instruments

+ Other...

System tool

| |

60 products in

Alignment systems

Continuous movement monitoring system PRÜFTECHNIK Alignment
PERMALIGN

With the PRÜFTECHNIK laser based PERMALIGN Service it is possible to monitor and document both the relative and absolute machine movements from initial start-up to full operating conditions to determine and resolve machine issues.

Typical applications for the PERMALIGN monitoring Service are:

Steam & Gas turbines
Compressors
Gearboxes
Pump Sets

Wireless machining center alignment laser Hamar Laser

The L-743 Triple Scan Laser Alignment System is one of only 2 lasers (the other is the L-733) in the world to offer 3 automatically rotating laser planes that are accurate enough for today's ever-increasing tolerances. This creates a powerful tool to not only MEASURE but also FIX problems in a fraction of the time needed with conventional methods. From machine tools to aircraft assembly, the L-743 is the best alignment system on the market today.

Alignment measurement system of bearing shells and bores PRÜFTECHNIK Alignment

Alignment of bores in diesel engines, compressors, pumps, gearboxes, stern tubes and turbines
Proper repair and reconditioning of combustion engines, compressors and pumps requires exact measurement of the alignment of crankshaft and camshaft bores, cylinder bores and crosshead guides. This is usually accomplished by optical or wire-based methods. CENTRALIGN Ultra is a precision laser alignment system designed to replace those older and more time-consuming technologies. It is much faster, very precise, and provides a clear measurement protocol.

Alignment diode laser LAP GmbH
IP 67, ø 20 mm

HD diode lasers are designed for use in rough industrial environment.

They generate lines that are clearly visible even in daylight. A rugged stainless steel housing protects laser diode, electronic circuitry and precision optics.

The laser diode is galvanically seperated from the power supply, which makes the laser extremely resistant to voltage peaks or current variations. The wide range input capacity enables the HD lasers to be used with all typical low voltage power nets.

The optics may be focused without tools. Spot size or line width can be adjusted. The line position doesn't change during focusing.

* focusable
* line, spot, crosshair lasers
* small, robust stainless steel housing
* IP 67, waterproof
* 1 - 30 mW

Alignment diode laser LAP GmbH
IP 54, ø 40 mm

LAP PD series line lasers are designed for heavy duty industrial applications, where a clear, precise line is desired for alignment purposes.

The cylindrical aluminium housing with Ø 40 mm fits the brackets commonly used on machines worldwide. It incorporates the wide range power supply, control electronics, laser diode and multiple element precision glass optics. PD laser withstand even the hardest conditions in areas where dirt and contamination are a normal part of the environment.

The wide range power supply operates on all mains worldwide and tolerates massive surges and power fluctuations.

Green line laser LAP GmbH

LAP laser of PY series with green beam are used, where visibility of red laser lines is not sufficient.

This can be depending on surface (e.g. red or black, wet stone) or light conditions (e.g. bright sunlight). Green light has a visibility about five times higher compared to red light, because human eyes have their maximum sensitivity in this wavelength area.
The laser beam is collimated for optimum line width in working distance. The new SUPERLINE optic allows to set the line width manually and to position the center of the brightness distribution along the laser line.

The robust housing made of coated aluminium protects laser, electronic circuitry and precision optics. The Peltier-Cooler, marked by the black fins, takes care of the right working temperature and prolongs life expectancy. Temperature is tracked internally, and the laser is swiched off in case of high temperatures to protect the laser source from damage.

* green beam
* SUPERLINE optics
* passive cooling and high temperature swich-off
* standard diameter 40 mm
* wide range power supply 100-240 VAC

Line laser LAP GmbH

Diode lasers of LAP LD Series are designed for industial applications.

They project spots or lines even visible in daylight. The optics, which produce a high quality collimated beam, can be focussed to adjust the spot size or line width to suit application and distance. Laser diode, collimating lens and electronic circuitry are housed in a strong cylindrical aluminium case.

The compact size of these diode lasers makes them ideal for applications where space is limited such as installation within existing machinery. Each unit has a built-in protection against over-voltage and reverse polarity, along with a softstart function and a keyed industrial connector.

* focusable
* line, spot, crosshair lasers
* smallest housing
* 1 - 30 mW

Fixture for laser based alignment of offset mounted machines Fixturlaser
Fixturlaser OffsetXA

The Fixturlaser OffsetXA fixtures provide express alignment of offset mounted machines.
Machines with offset drives are often thought of as insensitive to angular errors between driving and driven shaft. Vibration analyses and experiences from paper industry professionals have proved that this is not the case. Conventional alignment methods cannot provide the needed level of accuracy. Using the Fixturlaser XA together with the Fixturlaser OffsetXA expansion kit, you can precision align any offset mounted machine as fast as you align any other shafts. The Fixturlaser OffsetXA Expansion kit consists of both software and fixtures.
The Fixturlaser OffsetXA fixture is equipped with a laser pointer, which means that the alignment system is not needed in order to mount the fixtures. The fixtures only have to be adjusted until both the lasers are hitting the centre of the opposing target. Thanks to this feature, the mounting can be performed fast (read more about the Fixturlaser OffsetXA Expansion kit and its software in the Fixturlaser XA brochure.

Green line laser HB Laserkomponenten GmbH

VULCAN Titan

- Line length extended by asymmetric optics
- Best-selling line projector
- Integrated active temperature control (heating & cooling)
- Considerably increased life time
- Wide range 90 - 265 VAC
- Fee Focus option
- Dimensions: Ø 40 x 300 mm
- Operating voltage: 90 - 265 VAC

Line laser HB Laserkomponenten GmbH

VULCAN Runner

- Line length extended by asymmetric optics
- Integrated reversible laser-protection
- Wide range input 85-265 VAC
- Integrated power supply "Heavy Duty"
- Dimensions: Ø 40 x 201 mm

Line-cross generating laser diode module Photonic Products

A range of compact and affordable laser modules generating an accurate line or cross at 635nm or 650nm with uniform intensity distribution. The laser modules measure just 29mm in length, with a diameter of only 8mm and are extremely efficient and reliable.

They are ideal for the most demanding industrial and medical applications where space is at a premium, such as handheld instrumentation, targeting, alignment and machine vision.

These laser diode modules generate either a 70 degree full angle cross or a 58 degree or 88 degree full angle line, all factory focused at 1000mm. The focus can be set to other distances on request. The lens system produces an efficiently uniform intensity laser line.

At a visible wavelength of either 650nm or 635nm, these compact laser diode modules offer output powers of 0.9mW or 4mW with power stability of less than 5 per cent. Operating voltage is from 3V to 6V DC at an operating current of 30mA typ, (0.9mW) or 40mA typ, (4mW). Operating temperature range is -10 degrees Centigrade to +40 degrees Centigrade.

The laser modules consist of a brass housing, a laser diode, drive circuit and beam-shaping optics. Electrical connections are made via external flying leads. All modules have static, surge and reverse polarity circuit protection.

Line-cross generating laser diode module HB Laserkomponenten GmbH

VULCAN Runner (Power cross)

- Good visible cross-projektion
- 2 line laser in one housiing
- Wide range input 95 - 265 VAC
- Integrated power supply "Heavy Duty"
- Dimensions: Ø 40 x 221 mm

... products without technical information

High precision laser pulley alignment system Seiffert Industrial

Laser alignment system SCHMITT Industries

Laser alignment system Global Laser

Laser alignment system Line Seiki

Laser alignment system TAYLOR HOBSON

Laser pulley alignment system Seiffert Industrial

Roll alignment system Seiffert Industrial

Laser alignment system QUEST Integrated

Alignment diode laser FP Industries
MLC

Alignment diode laser FP Industries
MLM

Alignment diode laser FP Industries
MMG

Alignment diode laser Global Laser

Green line laser Z LASER Optoelektronik

Green line laser Seiffert Industrial

Line laser Z LASER Optoelektronik

Line laser Seiffert Industrial

Line-cross generating laser diode module Laser Components

Line-cross generating laser diode module Z LASER Optoelektronik

... see all the products in the category