|
|
Pinpoint accuracy with latest laser technology:
- Aligns grooves of the pulley rather than its face, allowing the alignment of pulleys of unequal width or with dissimilar faces - even fits applications where the pulley face cannot be used as a reference
- No trial and error. The laser position indicates the nature of misalignment allowing easy and accurate adjustment
Versatile and user-friendly:
- Powerful magnets allow fast and easy attachment
- Easy-to-use, requires no special training to operate
- Facilitates simultaneous adjustment of tension and alignment
- V-guides facilitate the alignment of a wide range of V-belt pulleys
Special side adaptor allowing alignment of multi-ribbed and timing belt pulleys as well as chain sprockets is available as accessory
A maximum operating distance of 6 meters (20 ft), makes it suitable for use in various applications
Sturdy aluminium housings provide great assembly stability and accuracy
Supplied in sturdy, light-weight carrying case for portability
|
|
Laser diode of alignment for industrial use, uasn in many applications that need the aligned one precision to cut, positioned of precision to mark, to make holes, to make borders...
Applications and sectors type:
- aligned marble pieces in cutting machines
- aligned tables or trunks in the sector of the wood
- aligned fabrics, botenes, pockets... in the textile sector
- aligned planxas or blocks in iron and steel industry
- aligned tables and leaves in premsas
- To aim positioned in cranes
- ecc ............
The comfort of this system is in seeing early where the requested work will be developed, then the work will be faster and with less errors.
Laser Rasnel produces lasers for 20 years and we can count between our European clients more than 100 constructors of machinery for the industry.
|
|
Easy-Laser® D160 BTA is attached in a few seconds (magnets) with the laser transmitter on one of the sheaves and the detector on the other. The transmitter generates a laser plane parallel to the reference sheave. The detector reads the position in relation to the laser plane and provides a live digital display of both offset and angular value. This makes the alignment of the adjustable machine very simple. The accuracy of the digital readout also means that you can align within prescribed tolerances and rely on the result.
The separate display unit makes it all even easier, as you can read off and follow the adjustment at the precise point on the machine where the adjustment is made. The display is also backlit for optimum visibility in poor lighting conditions.
|
|
FAG Top-Laser INLINE is suitable for shaft alignment of:
- motors
- gear boxes
- turbines
- pumps
- fans
- spindles
- propulsion shafts etc.
If you want ...
- to minimise the risk of unplanned shutdowns
- to prevent critical vibration
- to avoid damage to bearings and shafts
- to minimise wear on couplings and seals
- to optimise the efficiency of your machines ...
then the new FAG Top-Laser INLINE is the right alignment system because:
- FAG Top-Laser INLINE can be mounted, operated and easily read
- FAG Top-Laser INLINE alignment is more accurate compared to conventional alignment methods, such as dial gauge and ruler
- FAG Top-Laser INLINE helps to reduce vibration due to friction
- FAG Top-Laser INLINE increases productivity through longer operating hours
- FAG Top-Laser INLINE can be operated easily with a commercial laptop
- FAG Top-Laser INLINE can be used in conjunction with the FAG Bearing Analyser
The advantages:
- Improved machine availability
- Minimised unplanned downtime
- Increased maintenance intervals
- Considerable cost reduction
|
|
For straightness measurement of bores and bearing journals, both in production and in the field. Very stable construction for highest measurement accuracy. Measures both open and closed bearing pockets with equal simplicity. Handles up to 150 measurement positions.
Typical applications: Crankshaft and camshaft bearings in diesel engines, bearing journals and hull penetrations in propeller shaft installations, workpiece positioning in machine tools.
|
|
• Intrinsically safe and approved for use in potentially explosive environments.
• Shows the parallel and angular misalignment between the sheaves.
• Much faster and more accurate than measuring with earlier, conventional methods.
• For both horizontal and vertical mounted machines.
• Alignment can be made by one operator.
• Also suitable for nonmagnetic sheaves.
• Fits almost any kind of sheaves: V-belt, Timing belt, Flat belt and Chain drive.
|
|
Easy-Laser® BTA D150:
With digital readout! For simple and precise alignment of belt drives. Shows adjustment readings live on the display. The accuracy of the digital readout also means that you can align within prescribed tolerances and rely on the result.
Easy-Laser® BTA D80:
For simple, quick alignment of belt drives. The tool is fitted in a few seconds, and the laser line projected on the targets clearly shows how you need to adjust the machines. Compact and light.
Suitable for most types of drive, such as V-belt, timing belt, flat belt and chain drives. Can also be used on non-magnetic pulleys.
Typical applications: Most belt/chain drives.
|
|
Easy-Laser® shaft alignment systems has all the programs and functions you could want for the alignment of rotating machines. The EasyTurn™ program allows alignment with as little as 40° rotation of the shafts. Functions for compensation of thermal growth, alignment tolerance check and reference foot locking. Vibration measurement, Digital Sheave alignment and Geometrical measurements possible together with accessories.
Typical applications: Horizontal, vertical/flange-mounted and cardan-shaft-coupled machines, machine trains (up to ten machines in line).
All parts included in the systems are developed for rough use and to be easy to mount on the machines. The rugged aluminum and stainless steel design guarantees stable measurement values and reliable alignment even in the harshest of environments. As a user you are given step-by-step instructions on the display through the entire measurement procedure. Measurement values are displayed live, making it easy to adjust the machine to a correct position. The displayed resolution can be set as low as 0.001 mm [0.05 mils/thou].
|
|
For users who want a simple, reliable and cost-effective measuring system for the alignment of horizontally-installed machines. Provides vertical and horizontal alignment solutions, graphically on the display screen. EasyLink for Windows® is included to upload alignment data and export it to Excel®.
|
|
|
No more wire, no more string, no more straight edges. Belt alignment becomes a one-person job with the powerful L80 line laser. 100% billet aluminum construction-not plastic! Mount the laser on the drive unit and cast a line to the driven pulley. The laser line hits the magnetic targets on the driven pulley and the alignment becomes visual, you can see the results. No training and reduced man-power with superior results-now that's a solution! Visit our website for complete specifications.
|
|
The 2D CAD PROJECTOR is a laser device that utilizes the light power of a laser source with the speedy positioning of a galvanometric system in order to produce whichever type of geometric figures and not. It could be interfaced with every CNC machinery.
Our sytem is comprensive of:
Laser Projector
Installation CD
Software security key
Power Supply
Cables
Installation Manual
Bracket for moving the device on the 3 Axes.
Main features:
15mW Laser red light 635nm / 10mW Laser green light 532nm
Accuracy 1mm for 3m range
Weight 4kg
Open angle projection 80°
Stabilized temperature
Main features software:
Type of connection LAN - RS232 - USB
working files DXF - HPGL - PLT
Operative system Windows XP
Online rotation and adjustment of the projection.
Advantages:
Saving time and material.
Increase in productivity.
High precision during the working process.
|
|
2D and 3D laser projection systems
Laser projectors are used for several applications like CNC, wooden framework construction, truss or laminated woods. The laser projector allows a size for size 1:1 transfer of, for example, complete component drawings from a CAD system to the working table. This can be achieved easily and with an accuracy of 1mm/m. The polygons are projected with a red or green flicker-free laser line onto almost any surface. The size, form, position and height of the projection can be changed. In addition, single letters or numbers can also be projected. The polygons can be moved and assembled into groups (e.g. nesting). The infernal Computer of the CPS can accept several geometry files produced by AutoCAD or similar programs and output the pattern of that geometry in laser light directly onto the working surface.
A single laser beam is deflected by computer controlled mirrors at high speed through patterns that can contain any combination of arcs and straight lines. By seeing the entire pattern at once, the operator can easily tell exactly where to place hold down fixtures, raw materials or pods. Z-LASER uses temperature stabilised red or green laser sources. The 2D projectors are maintenance-free and constructed for the tough industrial usage.
|
|
CAD-PRO 3D are optimized for laser template projection on curved surfaces.
Working with complex surfaces requires 3D display calculation. CAD-PRO 3D laser projectors are equipped with special hardware, high-speed firmware and 3D software to meet this challenge.
For large area projection, several projectors may be combined. They serve bordering projection areas with flexible overlap. Load balancing distributes the projection according to area and reach of the joined projectors.
Maintenance or defect is no reason for production downtimes: LAP CAD-PRO are small, light-weight and only connected by one cable. Your personnel may change a projector within minutes, helped by the one-screw tilt bracket and scaffolds with lowering mechanism.
|
|
CAD-PRO 2D laser projectors are optimized for projection on flat surfaces.
LAP laser projectors can be equipped with either one or two laser sources. You may select red, green or multicolor (red, green and yellow) projection.
CAD-PRO 2D display templates or outlines from CAD data. Display to correct scale is given by calibration, using targets at previously measured positions.
Large area projection is done with several projectors positioned side by side. Load balancing is included in PRO-SOFT display software.
Step by step workflow may be supported by using structured data files.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
