- Power Transmission - Mechanical components >
- Actuator and Positioning System >
- Aluminum actuator
Aluminum actuators
Stroke : 25.4 mm - 300 mm
Force: 150 N - 1,000 N
Speed: 5.5, 7.5, 12.3, 23.5, 36.5 mm/s
Linear actuators for direct current with dynamic force up to 1000N. These actuators include a range with supply voltages between 12-24V and can, depending on the type, be supplied with encoder, potentiometer ...
Transmotec Sweden AB
Bore Ø: 30 mm Angles: 60°, 90°, 180° and 360° • Buffer adjustable over 7 mm • Rugged construction, high-quality finish
Stroke : 25.4 mm - 101 mm
Pressure: 1.4 bar - 8 bar
Force: 111 N
... for non-lube air operation, allowing for OSHA compliance. *Piston seals are U-cup type for long service life. *Aluminum body and end blocks contain tapped holes and dowel pin holes for precision mounting or ...
AGI Automation Components
Stroke : 5 in
Pressure: 1.4 bar - 8 bar
Force: 222 N
... Side Play: ± 0.001 [.03 mm] Maximum Payload: 50 lbs [22.6 kg] Material: High Strength, Aluminum Alloys, Steel Components Weight: 6.5 lbs [3 kg] Piston Diameter: 1.0 in [25 mm]
AGI Automation Components
Stroke : 8 in - 132 in
Pressure: 26 psi - 101 psi
Speed: 2 in/s - 16 in/s
... free due to no mechanical connection between the piston and the body. *Prelubricated for miles of maintenance-free travel, with easily accessible carriage lubrication port. *304 stainless steel ...
AGI Automation Components
Stroke : 50 mm - 1,000 mm
Pressure: 10 bar
Fluid temperature: -40 °C - 150 °C
... Constructional style: 2 sections Start and ending position:±5° Lockable at anywhere Cylinder Material: Alloy Aluminum, anodizing Output axle: 45# electroplate Assemble with: Ball valve. Butterfly valve, Rotary ...
Stroke : 50 mm - 1,000 mm
Pressure: 10 bar
Fluid temperature: -20 °C - 150 °C
... Action style: Single and Double Start and ending position:±5° Lockable at anywhere Output axle: 45# electroplate Piston material: alloy alumimum anodizing Assemble with: Ball valve, Butterfly valve, Rotary valve.
Torque: 4 Nm - 4,000 Nm
Rotary Actuator • Available in sizes 40 mm to 300 mm • Torque range 4Nm to 4000Nm • Compact Rack & Pinion design. • Hard anodized aluminum body. • ISO 5211 & Namur ...
Stroke : 2 in - 7.8 in
Torque: 50 ft.lb - 900 ft.lb
Ambient temperature: -13 °C - 122 °C
... actuator is to convert electrical energy into a mechanical force hydraulically, producing a smooth straight line thrust, throughout the piston stroke. They are mainly used to release spring-set brakes ...
Stroke : 50 mm - 420 mm
Pressure: 6 bar
Torque: 12 Nm - 10,025 Nm
Pneumatic Quarter Turn Actuators SPA-R are ideal for trouble-free, modular automation of process valves such as butterfly, plug and ball valves or as a control unit on reactor sampling systems. Main features • Robust ...
Stroke : 50 mm - 1,000 mm
Force: 40,000, 10,000 N
Speed: 39 mm/s
Low-Noise actuator for industrial/medical applications. The MLA1series linear actuator is Movetec’s flagship model suited for industry and healthcare applications. MLA1is available with IP54, IP66 ...
Movetec A/S
Stroke : 50 mm - 1,000 mm
Force: 3,500 N
Speed: 23.5 mm/s
Low-Noise compact actuator for medical applications. Movetecs MLA16 is designed for low-noise medical applications and where a compact actuator is needed. MLA16 is available with IP54 or IP66 protection. ...
Movetec A/S
Stroke : 20 mm - 1,000 mm
Force: 2,000 N
Speed: 23.5, 19 mm/s
... specifications: • Outer profile: Anodized Aluminium • Spindle/Piston rod: Carbon Steel/Aluminum/Stainless Steel • Friction part: POM derivate • Other materials of the actuator: Aluminum, ...
Movetec A/S
Stroke : 67 mm - 1,380 mm
Speed: 0.27 m/s - 1.12 m/s
Reduced price, only valid for stock items. The linear actuator GKA4270-600-12N-P5 is a compact positioning module with a rail guide and a precision ball screw. The U-profile made of Aluminium (steel in ...
Stroke : 20 mm - 12,000 mm
Force: 875 N
Torque: 19 Nm
The ST80 is a single rail belt driven electric linear actuator for use in applications requiring enhanced performance within stopping and/or in pushing applications, including but not limited to, industries ...
Bimba
Stroke : 50 mm
Force: 100 N - 400 N
Motor power: 80 W
... for direct position measuring • Resolution to 0.1 µm Reference-class linear drive High-resolution, high-load linear actuator. Highly dynamic, closed-loop DC motors for high velocities. Highly accurate position ...
Stroke : 100 mm - 1,500 mm
Force: 105, 68.2 N
Speed: 5 m/s
The ACT115DL high performance, cost-effective, linear-servomotor-driven actuator is faster and more accurate than a ball screw or belt-drive and doesn’t require costly, time-consuming maintenance. An integrated, assembled ...
Aerotech
Stroke : 25, 12 mm
Force: 50 N
Speed: 0.3, 0.1 m/s
... found here. The MMS 19 actuators provide highly precise linear motion for travels up to 25 mm with a very high resolution. They consist of a micrometer with non-rotating tip in a minimized, compact design. The actuators ...
Stroke : 800 mm
Rod diameter: 35, 25, 30, 40, 50 mm
Force: 4 kN - 15 kN
... motors Anti-turn device Safety nut Protective bellows More option upon request (*): Push rod in stainless steel AISI 304 Outer tube in stainless steel AISI 304 Lubricants for high or low ambient ...
SERVOMECH
Stroke : 1 in - 12 in
Pressure: 150, 500 psi
Add the Control, Rigidity and Power of Hydraulics to an Air-Powered Machine When your air-powered machine requires the rigidity and smooth control of hydraulics, Multi-Power Boosters are an optimal choice. These convenient, compact and ...
Linear Rail Actuator The linear rail actuator consists of a stationary base and load bearing carriage that travels along a rigid extruded aluminium rail, together with a single stack ...
LoPro linear actuators are an actuated linear motion system based upon proven DualVee guide wheel technology for smooth and quiet motion over long lengths. Actuation options include AT series belt, ANSI ...
BISHOP-WISECARVER
Pressure: 2 bar - 8 bar
Torque: 2 Nm - 13,040 Nm
Ambient temperature: -40 °C - 160 °C
... USE A suitable rotary actuator is available for each application of shut-off valves due to 18 different sizes and torques from 2 to 13.040 Nm. The high-quality powder coating of the cap and housing made of hard-coated ...
Stroke : 100 mm - 300 mm
Force: 1,500, 2,300, 2,700 N
Speed: 10, 15 mm/s
Just 85mm body diameter for an actuator with AC motor. Up to 2.700N. Just 85mm body diameter for an actuator with AC motor Smooth design ideal for in-view applications Plug & Play High performance ...
Schumo AG
Stroke : 113 mm - 1,216 mm
Lightweight, high rigidity aluminum base with Caged Ball LM Guides has been utilized for the guide portion. A screw or belt options are available for the drive system. In addition, Caged Ball LM Guides and QZ Lubricator ...
THK
... High travelling speeds and acceleration rates Wide range of types and accesssories The Uhing® Z-drives are based on rigid aluminium sections that are resistant to torsion. Several T-slots integrated in the carrier sections ...
Force: 4,000, 6,000 N
Motor power: 120 W
Speed: 7 m/s - 9 m/s
... Current: 5A Limit switch: Signal Type Duty Cycle: 10% (1/9) Body Color: Gray RAL 7035 Guide Profile: Anodized Aluminum Stroke Pipe: Anodized Aluminum Gear Fork: 4 x 90° Protection ...
Stroke : 300 mm - 750 mm
Force: 500 N - 500,000 N
Rod length: 300 mm - 750 mm
... mounting options due to lower and lateral clamping guides along the entire drive length - Compact drive in rectangular aluminum profile without disturbing attachments - Up to max. 500 N tensile and compressive force - ...
Kingspan STG GmbH
Speed: 0 m/s - 0.1 m/s
... linear rail and ball screw İt offers precise operation in automation and machine design. Technical Specifications Body; Aluminium (6063) 45x90 (A) and 90x90 (L) Profile Speed; Vmax = 0.1 m / s - 0.13 m / s Drive; Trapezoidal ...
Pressure: 2 bar - 8 bar
Torque: 4.6 Nm - 13,024 Nm
Ambient temperature: -40 °C - 150 °C
... can be customized and as options, stainless steel and aluminium alloy are also available. Actuator Body The aluminum extrusion is hard anodized(over 30um) to protect ...
Nutork Corp.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining