- Power Transmission - Mechanical components >
- Actuator and Positioning System >
- Aluminum cylinder
Aluminum cylinders
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Stroke : 10 mm - 1,000 mm
Pressure: 1 bar - 10 bar
Speed: 10 mm/s - 1,000 mm/s
... machine components. Various mounting accessories are available to fix the cylinders in different ways. Materials - anodized aluminium end-caps - stainless steel barrel and rod, aluminium ...
CAMOZZI AUTOMATION
Stroke : 10 mm - 2,500 mm
Pressure: 1 bar - 10 bar
Speed: 10 mm/s - 500 mm/s
... the end-blocks tube are designed in an extremely secure way, making use of cylinder tie-rods positioned internally and not visible on the assembled cylinder. This cylinder series ...
CAMOZZI AUTOMATION
Stroke : 10 mm - 2,500 mm
Pressure: 0.1 bar - 10 bar
Speed: 10 mm/s - 1,000 mm/s
... rod seal on request) low temperature: standard materials with chrome plated stainless steel AISI 420B rod, brass rod scraper ring, stainless steel AISI 303 nuts, stainless steel AISI ...
CAMOZZI AUTOMATION
Stroke : 1 mm - 500 mm
Bore: 16, 20, 25 mm
Pressure: 10 bar
Minicylinders manufactured according to the ISO 6432 regulation having high resistance technopolymer heads and anodized aluminium liner.Available in various versions with a wide range of accessories: • with or without ...
METAL WORK
Stroke : 1 mm - 500 mm
Bore: 32, 40, 50, 63, 80 mm
Pressure: 10 bar
... torques within the specified limits. The piston rod in Two-Flat cylinders has two opposing longitudinal surfaces and is mode entirely of stainless steel. The front head of the cylinder includes a sintered ...
METAL WORK
Stroke : 16 mm - 400 mm
Bore: 16 mm - 80 mm
Pressure: 1 bar - 10 bar
... both the upper and lower side. The bushing guides of the piston rods are fitted directly into the anodized aluminium alloy cylinder liner. There are two possible guiding solutions: sintered bronze bushings ...
METAL WORK
Stroke : 1 mm - 2,800 mm
Pressure: 0.6 bar - 12 bar
Force: 483 N - 7,363 N
ISO profile cylinder to ISO 15552 with a wide range of mounting options. • Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes • Standard ...
FESTO
Stroke : 10 mm - 200 mm
Pressure: 1.5 bar - 10 bar
Force: 30.2 N - 294.5 N
... before. Ideal for tight spaces. Extremely robust thanks to its durable materials. • Compact variant of standards-based cylinder DSNU • Quick and easy installation, even in tight spaces • Light weight • Self-adjusting ...
FESTO
Stroke : 2.5 mm - 25 mm
Pressure: 2.5 bar - 8 bar
Force: 5.7 N - 4,712 N
Fast acting cylinder with outstanding tensile force ratio and hole pattern for fastening to VDMA 24562. • Very short overall length • High forces in a compact size • Piston rod with internal or external thread • ...
FESTO
Stroke : 15 mm - 500 mm
Pressure: max 10.0 bar
Force: 10 N - 110 N
... different end caps style. The piston is aluminium and the sensor bracket, when required is in stainless steel 316 with plastic adaptor or in plastic material. The cylinder can be fixed ...
PNEUMAX
Stroke : 25 mm - 500 mm
Bore: 32 mm - 100 mm
Pressure: 0 bar - 10 bar
Derived from 1320 series ISO 6431 the twin rod cylinders are suitable for applicationsthat require the non rotation of the piston rod and resistance of flexion. Thisis done mounting the cylinder with ...
PNEUMAX
Stroke : 5 mm - 80 mm
Ambient temperature: -30 °C - 120 °C
This series of cylinders is available in two versions with different threaded fixing holes. The first one includes cylinders from Ø 32 to Ø 100 called “ISO” with fixing holes same as cylinders ...
PNEUMAX
Stroke : 25 mm
Pressure: 2 bar - 10 bar
Force: 445 N
... in restricted space Neat, clean appearance One-piece body construction Medium: - Compressed Air Port size: - G1/8 Cylinder diameter: - 32 mm
Norgren
Stroke : 4 mm
Pressure: 2 bar - 10 bar
Force: 55 N
... achieved in restricted space Neat, clean appearance One-piece body construction Medium: - Compressed Air Port size: - M5 Cylinder diameter: - 12 mm
Norgren
Stroke : 800 mm
Pressure: 1 bar - 8 bar
Ambient temperature: -30 °C - 80 °C
Proven and patented sealing system Interchangeability with series M/46000 Medium: - Compressed Air Port size: - G1/2 Cylinder diameter: - 80 mm
Norgren
This unit comes with cylinder heads, and a high tensile strength aluminum alloy is held in place by a feeding ring wire. The simple design ensures elimination of the excessive cylinder ...
ARO, Ingersoll Rand
... walled tubes can withstand denting and the cylinder utilizes washout-proof factory-lubricated grease. This cylinder is available with an extruded barrel in bore sizes of 1-1/2", 2", 2-1/2", 3-1/4" and ...
ARO, Ingersoll Rand
This easy to repair pneumatic cylinder can be safely operated at an air pressure of up to 200 PSI. The heat-coated aluminum tubing system, as well as the superior wear characteristics make this product ...
ARO, Ingersoll Rand
Stroke : 40 mm - 20,000 mm
Force: 0.3 kN - 60 kN
Torque: 0.14 Nm - 265.39 Nm
... Series Servo Electric Cylinder with advanced servo cylinder structure design and imported parts assembly, ensure that Lim-Tec servo electric cylinder in the domestic leading linear motion.Rolled ...
Stroke : 50 mm - 3,000 mm
Force: 0.3 kN - 1,000 kN
Speed: 10 mm/s - 1,000 mm/s
Servo electric cylinder can replace hydraulic cylinder and pneumatic cylinder completely with the advantages of energy conservation and environmental protection and easily connected to ...
Stroke : 50 mm - 150 mm
... load uniformly over the entire surface. • Custom made hydraulic cylinders with high strength aluminum alloy. Lightweight aluminum hydraulic cylinders Aluminium ...
Stroke : 50, 100 mm
Force: 309.3, 496.2, 1,002 kN
... Steel baseplate to prevent the cylinder from deforming if used on surfaces that are not perfectly flat. FPT - Fluid Power Technology: https://www.fpt-worldwide.com/en/products/lightweight-aluminum-hydraulic-cylinders/
Stroke : 100 mm - 1,000 mm
Force: 15,000, 10,000 N
Speed: 0 mm/s - 1,250 mm/s
New electric cylinder for heavy-duty applications RK Rose+Krieger has expanded its range of electric cylinders with the introduction of an additional electromechanical heavy-duty cylinder: ...
Stroke : 0 mm - 600 mm
Force: 0 N - 4,000 N
Speed: 0 mm/s - 50 mm/s
... run directly through the cylinder which simplifies start-up and configuration in PLC applications. Furthermore, the connection to the cylinder's fixation is possible with commercial hydraulic cylinders ...
Stroke : 20 mm - 100 mm
Pressure: 500, 350 bar
Force: 17.1 kN - 109.2 kN
B1.554 Block cylinders with aluminium or bronze housing for adjustable magnetic sensors double acting, max. operating pressure 350 bar or 500 bar
Stroke : 25 mm - 150 mm
Pressure: 3 bar - 8 bar
Rod diameter: 12, 16, 20, 25 mm
... the cylinder. This guidance avoids the problems of buttressing, regularly encountered with ultra-short guides. These pneumatic cylinders are robust and reliable, even at high speed thanks to: screwed ...
Stroke : 10 mm - 500 mm
Pressure: 1 bar - 10 bar
Rod diameter: 32 mm - 63 mm
... seal 4 Anodised aluminium Front cover 5 Zinc-plated steel Nut 6 Sintered bronze Bearing 7 NBR O-RING Seals 8 Neoprene Bumper 9 Anodised aluminium Piston 10 Polyurethane Piston Seal 11 Bonded ferrite ...
AIGNEP
Stroke : 25 mm - 1,000 mm
Bore: 160, 320, 200, 250 mm
Pressure: 1 bar - 10 bar
... Materials 1 Rear head Die-casted Sandblasted aluminium 2 Aluminum back piston 3 O-ring NBR or FKM 4 Magnet Bonded ferrite 5 Piston seal in Polyurethane or FKM 6 Piston in Aluminium 7 ...
AIGNEP
Stroke : 25 mm - 1,000 mm
Bore: 160, 320, 200, 250 mm
Pressure: 1 bar - 10 bar
... Materials 1 Rear head Die-casted Sandblasted aluminium 2 Aluminum back piston 3 O-ring NBR or FKM 4 Magnet Bonded ferrite 5 Piston seal in Polyurethane or FKM 6 Piston in Aluminium 7 ...
AIGNEP
Stroke : 25 mm - 2,700 mm
Force: 8 daN - 785.4 daN
... The new ISO 15552 cylinders of the Airwork CF series represent the new generation of ISO pneumatic cylinders that, thanks to the use of innovative materials and a state-of-the-art construction philosophy, ...
Airwork Pneumatic Equipment
Stroke : 25 mm - 2,700 mm
Force: 8 daN - 785.4 daN
... The new ISO 15552 cylinders of the Airwork CF series represent the new generation of ISO pneumatic cylinders that, thanks to the use of innovative materials and a state-of-the-art construction philosophy, ...
Airwork Pneumatic Equipment
Stroke : 10 mm - 320 mm
Force: 30 N - 295 N
- Stainless Steel AISI 303 rolled rod to reduce friction as much as possible - Rod and piston seals with the highest efficiency and longest durability - Metal piston to resist to extreme stresses - ...
Airwork Pneumatic Equipment
ISO-VDMA STANDARD CYLINDER MCQV No lubrication Special housing and bushing enable self-lubrication of the piston rod. High quality and long service life Hard anodized aluminum cylinder ...
Pneumatikzylinder mit Kolbenstange nach ISO-15552 Aluminium Stangpressprofil eloxiert mit hartverchromter Kolbenstange Spezielle Laufbuchsen ermöglichen den Betrieb ohne zusätzliche Schmierung der Kolbenstange Große ...
Stroke : 10 mm - 800 mm
Rod diameter: 16 mm
Force: 1.02, 0.68, 2.03, 1.36, 2.71 kN
... anti-rotation structure;DGRST65 is made of aluminum profile material. Apart from its square shape, it has beautiful appearance and texture,with more sturdy and durable performance than the general ordinary ...
Shenzhen Packway Technology Development Co., LTD
Stroke : 10 mm - 1,500 mm
Rod diameter: 25 mm
Force: 7.6, 5.1, 10.2, 3.06, 2.04 kN
Electric Cylinder DGRLT-93 is intended for light duty and comparatively higher force applications. DGRLT93 High Thrust Force Linear Actuator can reach 1000mm/s ultra high speed and no less than 8KN heavy duty, directly ...
Shenzhen Packway Technology Development Co., LTD
Stroke : 10 mm - 1,500 mm
Rod diameter: 20 mm
Force: 1.7, 5.09, 3.39, 2.55 kN
... practical use; it comes without an anti-rotation machanism by default, but the function can be added; DGRLT75 is made of aluminum profile material,square shape, which has beautiful appearance and texture,with ...
Shenzhen Packway Technology Development Co., LTD
Force: 1,200 N
Speed: 0.09 m/s
Permanent magnet motor 12 - 24 Vdc Worm gearbox ACME lead screw Aluminum push rod (Stainless steel on request) Permanent grease lubrication IP 65 Working temperature range -10°C +60°C Intermittent duty S3 30% (5 ...
Force: 2,500 N
Speed: 0.1 m/s
Permanent magnet motor 12 - 24 Vdc Worm gearbox ACME lead screw Aluminum push rod (Stainless steel on request) Permanent grease lubrication IP 65 Working temperature range -10°C +60°C Intermittent duty S3 30% (5 ...
Stroke : 0 mm - 1,000 mm
Bore: 50, 63 mm
Pressure: 1 bar - 10 bar
The coaxial hydropneumatic governor consists of a pneumatic power section and a hydraulic control section. Caracteristics This device is used to adjust and standardise speed; if installed, it makes it possible to solve any space problems ...
Stroke : 20 mm - 1,500 mm
Bore: 25 mm - 200 mm
Pressure: 215 bar
... These cylinders are compatible with ISO VG 46 mineral oils. The V215CR are long strokes hydraulic cylinders and offer strokes up to 1500 mm. The cylinder heads are made of carbon ...
VEGA SRL
Stroke : 20 mm - 350 mm
Bore: 32 mm - 100 mm
Pressure: 12 MPa - 22 MPa
... a key. These double-acting hydraulic cylinders features the very high resistance and durability of alloy cylinders with the lightness and versatility of aluminum cylinders. ...
VEGA SRL
Stroke : 80 mm
Bore: 25 mm - 100 mm
Pressure: 250 bar
... hydraulic cylinder come with a 7075 aluminum alloy body, a chromium-molybdenum steel rod, and 7075 aluminum alloy piston. Heat-insulating flanges are available to separate the cylinder ...
VEGA SRL
Stroke : 571 mm
Force: 2,670 N
Speed: 0.3, 0.76 m/s
... options • Type 380 die-cast aluminum, epoxy-coated bearing housing • Type 304 stainless steel, 1/4 hard, polished thrust tube • Ball bearing support • 6063 T-6 aluminum, hard-coated anodized and Teflon-impregnated ...
Kollmorgen Europe GmbH
Stroke : 50 mm - 200 mm
Force: 667 N
Speed: 0.33 m/s
... lead • Stepper, brushless servo and custom motor options • Bearing/drive housing: 6063-T6 aluminum, anodized • Mounting plates: 6061-T6 aluminum, cast aluminum plate, anodized • Thrust ...
Kollmorgen Europe GmbH
Stroke : 50 mm - 750 mm
Force: 3,600 N
Speed: 0.23 m/s
... leads • Stepper, brushless servo and custom motor options • Bearing/drive housing: 6063-T6 aluminum, anodized • Mounting plates: 6061-T6 aluminum, cast aluminum plate, anodized • ...
Kollmorgen Europe GmbH
Stroke : 1 in - 16 in
Bore: 1 in - 5 in
Pressure: 8.9 psi - 10.1 psi
... steel cylinder body for integrity. Chrome plated piston rod resists wear and corrosion adding to the cylinder’s life cycle. Intricately customizable through the wide range of accessories available to ...
SPX Hydraulic Technologies
Stroke : 2.13 in - 10.25 in
Bore: 5, 3, 4, 2 in
Pressure: 9,030, 9,960, 9,250, 9,696 psi
Half the weight of equal capacity steel cylinders, the RA Series cylinder utilizes an aluminum body that resists sparking in hazardous circumstances. The aluminum piston ...
SPX Hydraulic Technologies
Stroke : 2 in - 10.13 in
Bore: 1 in - 4 in
Rod diameter: 3 in - 8 in
... , excludes the RH203 and RHA306 models. ■ All cylinders are furnished with a 9796 3/8” NPT female half coupler, except the RH120. ■ Aluminum cylinder body and piston are featured on ...
SPX Hydraulic Technologies
Stroke : 5 mm - 100 mm
Bore: 12 mm - 100 mm
Pressure: 0.1 MPa - 1 MPa
•Two-stage stroke: Two compact cylinders with same I.D. but different strokes length are connected to achieve two-stage stroke. •Ultra Compact, light weight and space saving cylinder. •Wide range of ...
Speed: 0.75, 1.25 m/s
Lightweight Operating pressure up to 10 bar Maximum processing speed: 1,25 m/s (when using two pressure ports) 0,75 m/s (when using one pressure port) Maximum acceleration 10 m/s2 Lubrication for life, ex works ...
Bore: 32 mm - 100 mm
VDMA / ISO Cylinders • Meet ISO 15552 and VDMA 24562 standard specification. • Avialable in 32, 40, 50, 63, 80 & 100 mm bore dia. • Cylinder in compact & streamlined construction with range of mountings. • ...
Stroke : 50, 150 mm
HOLLOW CYLINDERS ALUMINUM - ACHC • Aluminum is lightweight. • 30 and 60 ton capacity. • Rod and cylinder are hard anodised for durable surface. • Equipped with ...
Stroke : 50 mm - 250 mm
LOCK NUT ALUMINUM CYLINDERS - ALNC • Can both lift and mechanically secure a load. • Trapezoid threaded rod for quick adjustment of the lock nut. • Capacity from 20-100 ton. • Built-in return spring. • ...
Force: 483 N - 7,363 N
... The availability in TANDEM execution (such as multi position, front and rear opposed and double thrust), along with the aluminum profile included, which comes with slots for magnetic sensors, are other important features ...
ARTEC SRL
Force: 415 N - 7,363 N
... that can be made available by the manufacturer (front and rear opposed, double thrust or multiposition), along with the aluminum profile with slots for magnetic sensors, complete the list of impressive features.
ARTEC SRL
Stroke : 25 mm - 160 mm
Bore: 32 mm - 125 mm
Pressure: 1 bar - 10 bar
SINGLE ACTING SERIE H CYLINDERS Artec’s SERIE H range of cylinders in accordance to ISO 15552 standard now include also the single acting version, both with front spring (HSM) and with rear spring (HSEM). From ...
ARTEC SRL
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining