Amplifiers

Fiber-optic amplifier 1 055 – 1 075 nm, min. 50 mW | PM–YDFA Multiwave

Multiwave Photonics PM Ytterbium-Doped Fiber Amplifiers are high smallsignal gain polarization maintaining and single polarization (SPM) amplifiers optimized for the wavelength range 1055 nm - 1075 nm, provided as compact OEM modules. The optical amplifiers...

Fiber-optic amplifier 135 - 250 VAC, 30VA Ningbo Hi-tech ADK Network Technologies Co., Ltd

Outdoor trunk CATV amplifier with PHILIPS amplifier module, 2 output ports, forward path frequency 87-862MHz, fixed plug-in ATT and EQ, output level 106 dBuV, gain 34dB; return path frequency 5-65MHz, gain 20dB, diplex filter 65/87 (other freq. split is available), imperial F female port, waterproof housing, AC135~250V (power cord with EURO...

Fiber-optic amplifier 100 mm / 250 mm | LKV-15-PSK-ST3 Eickmann Elektronik GmbH&Co.KG

Fibre optics made of glass or plastic are used to transport the light from the sensor to the target and back.Fibre optics are...

Wireless LAN (WLAN) power amplifier Microsemi

Microsemi offers a wide range of wireless LAN (WLAN) power amplifier. The LX5503E is a power amplifier optimized for high-efficiency lowpower applications in the FCC Unlicensed National Information Infrastructure (U-NII) band, Europe HyperLAN2, and Japan WLAN in the 4.9-5.85GHz...

CDMA power amplifier Anadigics

AWC6323 addresses the demand for increased integration in dual-band handsets for CDMA networks. The small footprint 3 mm x 5 mm x 1 mm surface mount RoHS compliant package contains independent RF PA paths to ensure optimal performance in both frequency bands, while achieving a 25% PCB space savings compared with solutions requiring two single-band PAs....

RF power amplifier integrated circuit Teledyne Microelectronic Technologies

A prototype built for C-band Power amplifier, including 2 by-pass capacitors, Preserves microstrip structure, i.e., a robust...

Amplifier for modular fiber optic 12 V - 35 mA | ZS / CAM-90 GEUTEBRÜCK

Twisted-pair transmitter in miniature housing with angular BNC-plug for direct connection to any video camera. Applicable for colour or monochrome signals. Transmission distance under...

Sensor charge amplifier 24 VDC | 1-328 series CEC Vibration Products

Features: Low Impedance Output Extremely Low Noise User Selectable Gain Wide Frequency Response Acceleration and Velocity Outputs Applications: Test Cell Instrumentation Automotive...

Charge amplifier Brüel & Kjær Vibro

Our charge amplifiers are intended for use with charge type accelerometers, when monitoring plant machinery in harsh environments and for industrial machine and gas turbine applications requiring long mean time between failures. The charge amplifiers...

Audio power amplifier max. 325 W BARTEC

The VA300+ amplifier is designed to provide reliable efficient service in critical life dependant alarm and voice broadcast applications (PAGA). The unit is based upon a compact industry standard size Euro card module designed to plug in/out of a 6U high card frame (see data sheets DS0003). The VA300+...

Audio power amplifier Mitsumi

Audio Power Amplifier Monolithic IC MM3111 This IC is an audio power amp that can operate at low voltage. Operating supply voltage supports 3V and 5V power amp, making it ideal for applications such as mobile...

Pre-amplifier A250 Amptek Inc.

The A250 is a hybrid state-of-the-art Charge Sensitive Preamplifier for use with a wide range of detectors having capacitance from less than one, to several thousand picofarads. Such detectors include silicon, CdTe, CZT, and HgI2 solid state detectors, proportional counters, photomultiplier tubes, piezoelectric...

Pre-amplifier 2007B Canberra Industries

* Low preamp power requirement ±12 V dc at 15 mA * Compatible with Accuspec NaI Plus * HV transient protection. The Model 2007B low-noise charge-sensitive preamplifier integrates the charge pulse from a PMT (decoupled...

GaAs power amplifier Silicon Storage Technology

The SST12LF01 is a 2.4 GHz Front-End Module (FEM) that combines a high-performance Low-Noise Amplifier (LNA) and a Power Amplifier (PA). Designed in...

Pre-amplifier for EMI/EMC testing 100 Hz - 30 MHz | PAL-010 Com-Power

Com-Power model PAL-010 Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing.. It has a frequency...

Ultra low noise charge sensitive pre-amplifier eV-550 series EI Detection & Imaging Systems

Ultra Low Noise (General Purpose or Application Specific) Charge-Sensitive Preamplifier * Low noise at 0-1,000 pF Description The eV-550 preamplifier is essentially a charge-to-voltage converter. Charge carriers...

RF power amplifier module 20 W, 30 - 512 MHz | A-320 Ultralife

We designed this amp specifically to meet the needs of the warfighter. At 24 ounces, the A-320 amplifier is the smallest and lightest...

Linear power amplifier max. 100 kHz | CSDLD Hohner Automazione

The card from the maximum dimensions of 90mm x 70mm offers the assembly possibility is to panel, through the four disposed holes on the angles, is to guidance DIN in the version with support sideburns (version standard). Such card allows splitter marks them coming from encoder Line Driver (To, B, 0 and complementary ones)...

Pulse width modulation (PWM) amplifier module 0.956 kW, 4 - 8 A | 3U042 series Delta Tau

3U042 is a 3U UMAC rack form factor Direct PWM amplifier designed to drive up to two axes at up to 4 Amps RMS continuous and 8 Amps RMS peak (2 seconds). These drives are low power amplifiers designed to drive permanent magnet brushless (rotary or linear), AC induction and DC Brush type motors from PWM (pulse width modulated) command signals....

Patch clamp amplifier CAIRN RESEARCH

The Optopatch patch clamp amplifier from Cairn Research is a low noise, high gain signal amplifier designed to monitor currents in the pA to nA range over a large bandwidth. It incorporates a number of unique features, including our optical headstage, to optimise its performance...

High voltage amplifier max. 20 kV, max. 1 200 W | AMP series Matsusada

AMP: ultra high speed high voltage amplifier AMP series is an ultra high speed high voltage amplifier. It realized as fast as 700 V/µs even with load, and approximately...

Isolating switching amplifier Jacob - Kabelverschaubungen

General: The most important data of reed switches (contacts) are: a) switching voltage b) switching current c) switching capacity The maximum data are specified by the manufacturer for purely resistive loads. None of these maximum values must be exceeded. Otherwise, the lifetime of the reed contact would substantially decrease,...

Isolating switching amplifier EM-M26 Electromen

FEATURES: • Wide operating voltage range • Multiple input ranges • Trip and hysteresis adjusts • Adjustable on- and off-delay • Isolated supply voltage • Relay output with co-contacts • Over voltage protected • Incorrect polarity...

Frequency distribution amplifier FDU-240 Brandywine Communications

FDU-240 LOW PHASE NOISE DISTRIBUTION UNIT - OFFERS 24 5MHZ OR 10MHZ OUTPUTS The Brandywine Communications Model FDU-240 offers the user the most requested and reliable frequency distribution features in one time and frequency distribution unit. The base unit is a dual input, 24 output frequency distribution amplifier suited for 5MHz...

Four channel wide-band amplifier 400 Vpp,50 mA,DC - 500 kHz | 9400 Tabor Electronics

Model 9400 was designed as a general purpose, wide band and high voltage amplifier however, with specific applications in mind. It has four channels built in...

High current power amplifier F6300 Doble Engineering

The F6300 High-Power Current Amplifier works in combination with the F6150 Power System Simulator to bring your realistic protection scheme testing power to the next level. This combination...

Carrier frequency measuring amplifier Picas / Signalog 6000 Peekel Instruments

Picas / Signalog 6000 Measuring Amplifiers Key features - 2 channel 5 kHz carrier frequency amplfier with 2 kHz bandwidth (CA2CF card) with galvanic isolation between...

Measurement amplifier for web tension sensor CV series Erhardt + Leimer

Measuring amplifiers Measuring amplifiers ensure a stable bridge supply voltage, They amplify the output signal of the load sensors to a standard signal . Measuring amplifier CV 22 Measuring amplifier for connecting...

Measurement amplifier Bikotronic

The measuring amplifier BTW-400 can be easily snapped onto standard mounting rails. The electric connection is realised through...

Measurement amplifier 230 Vac / 9 Vdc, 500 mA | FAD-4 A/D Flintec

The FAD-4 A/D Converter is a very accurate, versatile, general purpose instrument. It is designed to connect 1 to 4 load cells. It incorporates high performance A/D conversion including digital calibration with individual digital corner adjustment. The instrument is approved by Weights & Measures Authorities...

Measurement amplifier VMV-0024 Velomat Messelektronik

The data logger serves for the supervision and event storage in four channels with the following features: - one DMS-bridge input - two Pt-100-inputs - one frequency input for NPN-...

Digital servo-amplifier 200 - 230 V, 2.8 - 22.8 A Telco

TelcoMotion’s servo amplifiers are designed for high resolution and quick response. There are two series amplifiers available. TSTA series amplifier provides three control options: position control, speed control and torque control, and has status display. ESDA series amplifier has light weight and position control mode. All of our amplifier has ensured quality, and CE certificated. Features TSTA Full...

Pneumatic volume booster 1/4" - 3/8", max. 17 bar AirCom Pneumatic

Signal-operated regulator designed to provide outlet pressure which is the sum of the input signal pressure plus a preset bias. As an option, the relay can start with bias range -0.3 bar / -4 psi. The...

Pneumatic pressure booster 2.4 - 11.1 cu. in. Vektek

Multiplies your shop air line pressure to power simple hydraulic systems without electricity Intensification ratios ranging from 11:1 to 54:1 Output capacities from 2.4 to 11.1 cu....

Erbium doped fiber amplifier ( EDFA ) WRA-217 JDSU

The WaveReady WRA-217 is dense wavelength division multiplexing (DWDM) optical amplifier that is totally user configurable. This multichannel amplifier provides a simple and economical C-band optical amplification solution in a flexible, ready-to-use package. The WRA-217 amplifier includes an advanced...

Erbium doped fiber amplifier ( EDFA ) FURUKAWA ELECTRIC

EDFA for Analog CATV networks Applications • Video, analog or Booster applications • Single-channel or small number of channel networks Product type: ErFA 33211, 33212, 33213, 33214 Descriptions ErFA3321x...