|
|
PRECILEC optical incremental encoders are designed with the same reliability than the RADIO-ENERGIE tacho generator.
They measure with the highest accuracy the angular speed and position of rotating shafts in industrial environment.
Applications for encoder diameter 90 are mainly dedicated to lift and elevator, cement, iron industries.
Main Characteristics of our 90 diameter encoder, RCI 90 HS
PRECILEC encoders use a differential optical and ratio metric principle to minimize temperature and photodiode aging effects.
Their universal complementary push-pull output interface and their large supply voltage range make them very easy to connect to most of electronic control units.
Shaft type : 20, 25, 30, 42 mm and 1inch, stainless steel through hollow shaft.
Housing diameter : 90mm.
Pulses per turn : 1024.
Fixation spring plate – Termination Radial cable, M23 & MS310 receptacle.
Operating temperature range (encoder body) : -25° 85°C.
Electrical Characteristics :
Supply voltage : 4,5 to 30V DC with reverse polarity protection.
Output signals Universal complementary push pull, short circuit protected (7272) RS422 compatible with 5V supply voltage.
Mechanical Characteristics :
Max speed : 3000rpm.
Protection : IP66 at shaft end, IP 66 at housing (IEC60529)
|
|
Capacitive sensor - 4B BINSWITCH
- Application: level indicators (tanks/silos); choke switches (chutes, conveyors, elevator legs)
- Detects presence or absence of most liquids & free flowing bulk granular materials
- Easy installation & self-contained
- Reliable & rugged, 30mm diameter body, fully encapsulated electronics |
|
The M300 & M800 are underspeed sensors that use microprocessor technology:
M300 – universal supply voltage, 30mm diameter body, single trip point at 20% below calibrated speed. ATEX Approved.
M800 – universal supply voltage, DIN style enclosure, dual trip points at 10% & 20% below calibrated speed, tacho output. Not ATEX Approved.
|
|
P100 18mm Inductive Sensor
Detects the presence of metallic objects in dangerous conditions such as in handling, warehousing, packaging, conveying, assembly, processing, etc.
May also be used to generate pulses for the detection of rotational speed
2-wire multi-voltage technology or 10-30 VDC NPN/PNP
Detects up to 8mm
Other products available:
- P300 30mm Inductive Proximity Switch
- P800 DIN Style Inductive Proximity Switch |
|
T400
Bearing Temperature Monitor
Electronic control unit - monitors up to 4 zones and 24 bearings per module
Alarm & status LEDs provide quick location of the problem bearing
Easy Installation
Stand alone system |
|
T500 Elite - HotBus system
- Serial Network for Continuous Remote Sensor Monitoring
- Preventative maintenance tool fully compatible with existing systems
- Accepts input signals from a total of 256 sensors
- User adjustable trip-points for alarm & shut-down
- “BUS VIEW” Easy-to-use graphical monitoring software available
- Utilises the "HotBus" communications system |
|
Suitable for all Braime sensors & other industry standard cylindrical sensors
Not affected by shaft or machine vibration
Easy to install, safe
Optional "Magcon" simplifies mounting
Heavy duty all stainless steel version available on request |
|
4B offers a large range of magnetic separators for both agricultural and industrial environments.
These products have been designed for the purpose of filtering and decontaminating the products that flow through / past them and to protect the machines from destructive metallic objects.
They are available in different forms: rods, strip magnets, drum magnets, grids, etc..single or double-housed and with different strengths, up to 11000 gauss.
They allow to extract ferrous and stainless steel contaminants which result from the mechanical usage of the machinery. |
|
Tiltswitch Level Indicator
Level indicator for bins & silos
Suitable for almost all granular materials
Alarm is triggered when material build-up tilts sensor by approx 15°
Sensor cable adjustable up to 5m |
|
The Explosion Vent Panels which all carry EC-type certification have been designed as relief devices to rupture at predetermined pressure to allow the flames and overpressure to vent into a safe area in the case of an explosion.
Features:
- Bursting pressure: 50mbar to 500mbar
- Maximum working pressure: 40% of bursting pressure
- Maximum working temperature: -15°C to +60°C
- Available in a range of sizes.
The explosion vent panels are another addition to 4B Braime’s ever increasing range of ATEX components, which can be viewed on the company’s website: www.go4b.com.
A brochure is available on request.
|
|
4B INLINE JUNCTION BOX
- For use in Atex zone 20& 21
- Tough moulded nylon body
- Accepts 5 x 2,5mm2 cable cores
- Threaded to take standard M25 glands |
|
WDB Series Bearing Sensors
PTC Thermistor with fixed pre-set trip points from 50°C to 120°C
NTC Thermistor for continuous measurement up to 110°C
Long term reliability
Easy installation - replaces existing grease nipple
Extensive range of PTC sensors available from 50°C to 120°
For use with T400, T400 Elite, T500 Elite or Watchdog Elite control modules
|
|
Electric Powered Lift Trucks 1.0 - 5.5 tonnes
Our complete range of electric pneumatic and cushion tired lift trucks deliver controllable, programmable performance for the safe handling of different loads such as glass, plastics, bricks, etc.
AC power has increased productivity, lengthened shifts and simplified maintenance routines to improve productivity in heavier applications, more demanding conditions and extremes of temperature. With a range that includes 24V, 3-wheel machines for light duties, 48V 3- and 4-wheel workhorses and heavy duty 80v units. Cat Lift Trucks boast one of the most modern and complete product ranges in the industry.
|
|
Electric Powered Lift Trucks 1.0 - 5.5 tonnes
Our complete range of electric pneumatic and cushion tired lift trucks deliver controllable, programmable performance for the safe handling of different loads such as glass, plastics, bricks, etc.
AC power has increased productivity, lengthened shifts and simplified maintenance routines to improve productivity in heavier applications, more demanding conditions and extremes of temperature. With a range that includes 24V, 3-wheel machines for light duties, 48V 3- and 4-wheel workhorses and heavy duty 80v units. Cat Lift Trucks boast one of the most modern and complete product ranges in the industry.
|
|
EC15-30N
La gamme électrique avec bandage (ECN, Electric Cushion) réunit des chariots robustes et puissants, conçus pour durer.
L%u2019extension des intervalles d%u2019entretien à 500 heures confère une excellente rentabilité à ces modèles tandis que les systèmes de surveillance intelligents permettent à l%u2019opérateur de garder un %u0153il sur les principales fonctions du chariot en mode de fonctionnement normal.
Présentation Productivité Sécurité Durabilité Gamme Galerie Concessionnaires Feuille de spécification Produits
|
|
NT12
This precision equipment is designed to work in standard pallet racking with narrow aisles, with or without guide rails, up to lift heights of 9 meters.
Pallet turning is quick and easy and the safely positioned fork-mounted camera gives the operator a clear view of the fork tips for smooth pallet entry. The NT12 Turret truck is ideally suited to applications in warehouses with slow moving goods in bulk storage
|
|
NR14 - 25N
Cat Lift Trucks’ Reach Trucks are specifically engineered to cater for a wide range of storage and retrieval scenarios.
The 10 ‘N’ generation models in standard or high performance configurations offer a comprehensive range of capabilities to manage a wide variety of applications, loads and pallet types. AC technology provides a superb power/energy efficiency ratio for effortless operation and a long working life. |
|
Diesel Powered Lift Trucks 1.5 - 16.0 tonnes
Designed and built for dependable performance in any application, our range of diesel powered lift trucks are suitable for even the harshest environments. Advanced engine powered technology offers the levels of performance necessary to meet the requirements of modern business.
Each truck includes the easy-to-use features common to every Cat lift truck, meaning that operators can move from truck to truck, without the need to re-familiarize. A range of optional extras ensures that you can choose the configuration best suited to your needs.
|
|
Diesel Powered Lift Trucks 1.5 - 16.0 tonnes
Designed and built for dependable performance in any application, our range of diesel powered lift trucks are suitable for even the harshest environments. Advanced engine powered technology offers the levels of performance necessary to meet the requirements of modern business.
Each truck includes the easy-to-use features common to every Cat lift truck, meaning that operators can move from truck to truck, without the need to re-familiarize. A range of optional extras ensures that you can choose the configuration best suited to your needs. |
|
The power of the forklift comes from the remarkable direct injection diesel engine (Model 6102G or Japan 's ISUZU 6BBI)
• Its transmission structure is consisted of a hydraulic torque converter, hydraulic shift transmission case and plantary side wheel reduction gear. The truck still performs well despite various harsh working condition.
• The box-type frame structure of the body, high intensity broad viewing door frame, full hydraulic steering mechanism- The truck is easy to operate, has good maneuverability, is safe and reliable, and is highly efficient.
• The forklift is widely used in various national economic departments for loading, unloading and transporting cargoes.
The forklift lifting height reach 6M, load capacity will be: 3.5tonne, free lifting height will be 2000mm by one, free lifting cylinder. |
|
LP Gas Powered Lift Trucks 1.5 - 7.0 tonnes
The LP gas range ensures that we can offer suitable solutions for both indoor and outdoor applications. LP gas offers an attractive alternative to regular diesel as it provides power and torque with minimal emissions and excellent fuel economy.
|
|
|
|
see the results for the following category
