|
|
The encoders series MEM-Bus avail on an interface to connect to field bus systems according to the CANopen standard.
MEM-Bus encoders can be supplied both in single turn version (resolution 13 bit) and in multiturn version (resolution 19 bit: 8192 steps/rev. x 65536 revolutions).
The encoder operating parameters can be set directly by the user: revolutions no., steps x revolution, rotation direction and preset no.
The diagnostic function signal possible parameter or position entering errors, and the battery alarm (data memory is ensured for over 13 years).
3 LEDs signal the supply, line and error state.
Different mechanical versions are available to satisfy all applications: round or square flange, servo coupling, hollow shaft for motor coupling.
The electrical connection is by cable: two or three cable gland option is available.
|
|
The encoders of the FIELD BUSSES series are absolute Single-turn or Multi-turn rotary shaft encoders with an interface to connect to field bus systems according to the PROFIBUS, INTERBUS, CANopen, DeviceNet or Ethernet standard.
PROFIBUS: PROcess FIeldBUS (in according to EN50170 vol.2 Standard), was one of the first open bus for constructors. DP VERSION is oriented to fast switch of a reduced number of data in automation sector.
CANopen: Controller Area Network; transmission protocol to message oriented. Used in automotive sector.
DeviceNet: field bus similar to CANopen, but much more open and with more restrictive specifications.
InterBus: first open bus realized in the world ( in according to EN50254 and IEC 61158 Standard). It is able to realize real-time functions.
|
|
Singleturn and multiturn encoders with Fieldbus, SSI, parallel- or analogue interfaces
Technologies:
- Absolute multiturn encoders with mechanical gear or electronic multiturn stage
- Intelligent Sensing Technology (IST)®
- Integrative Technology®
- Safety LockTM Design, OptoASIC Technology
- Latest field bus profile
These characteristics are ideal, for example, in the following applications:
- Trains, buses, construction plant, agricultural vehicles and other mobile equipment
- Movement of materials, storage, transport and storage technology.
- Plant engineering & Construction
- Elevators
- Gears & motors
- Wind power
|
|
G0AMH
Technical data - electrical ratings :
Absolute accuracy ±0.025°
Approvals UL Approval / E63076
Code Binary
Code sequence CW/CCW programmable
Consumption w/o load <100 mA (24 VDC)
Diagnostic functions Position or parameter error
Multiturn sensing
Emitted interference DIN EN 61000-6-4
Function Singleturn
Initializing time 250 ms after power on
Interfaces Profibus-DPV0
CANopen
DeviceNet
Interference immunity DIN EN 61000-6-2
Number of turns 65536 / 16 bit
Programmable parameters Steps per turn
Number of turns
Preset
Scaling
Rotating direction
Reverse polarity protection Yes
Status indicator DUO-LED in bus cover
Steps per turn 8192 / 13 bit
Supply voltage range 10...30 VDC
User address Rotary switch in bus cover
Other products available:
|
|
Characteristics:
- Model CLS: Version "passivates" without nonskeletal µ-processor
- CRS Model: Version "activates" with skeletal µ-processor
- With ENCOM - K1, K2, K3- or profile TWK
- Code of Gray exit or Binary
- Max. Resolution 8192 pas/360°
- Extended from max. measurement 4096 turns
- Compact and robust Execution
- Alternative "Z" with junction box
- Available on request with LEDs of diagnosis
- Acceptable Axial loadings and radial on the axis: 250N
- Degree of protection IP 65 or IP 66
|
|
Characteristics:
- Compact and robust Execution
- According to ODVA DeviceNet Specification Release 2.0
- Transmission speed until 500kBaud
- Max. Resolution 8192 pas/360°
- Extended from max. measurement 4096 turns
- Total Resolution max. 2^25 (Bit)
- Acceptable Axial loadings and radial on the axis: 250 NR
- Degree of protection IP 65 and IP 66
- Alternative "Z" with junction box (addressing, transmission speed via switch DIP)
- Alternative "M" with round connector (addressing and transmission speed by Software)
|
|
Characteristics:
- Compact and robust Execution
- According to "Device for Encoders the CIA draft Standard Proposal 406 Version 2.0 Profiles"
- Transmission speed of transmission until 1MBaud
- Galvanic Separation of the liaision Drunk by converter DC/DC
- Max. Resolution 8192 pas/360°
- Extended from max. measurement 4096 turns
- Total Resolution max. 2^25 (25 Bit)
- Acceptable Axial loadings and radial on the axis: 250N
- Degree of protection IP 65 or IP 66
- Alternative "Z" with junction box (addressing, transmission speed and resistance of fence of the integrated Buses)
- Alternative "L" with round connector 12 pins (addressing and transmission speed by Software)
|
|
|
|
|
|
General Description
The profichip MPI12x is a communication chip with processor interface for MPI applications.
The MPI12x handles the message and address identification, the data security sequences and the protocol processing for PROFIBUS, which is the underlying transmission protocol.
Token handling, error detection and data pre-processing is executed out automatically by the MPI12x, relieving the host processor from all time-critical tasks and time-consuming arithmetic operations. Support of data transmission rates up to 12 Mbit/s, the integration of the PFOFIBus protocol into hardware, 4 KByte communication RAM and the configurable processor interface are features to create high-performance MPI applications.
Alternatively, the MPI12x can be used as a Serial Interface Device supporting synchronous and asynchronous standard protocols as well as user defined protocols with data transmission rates up to 12 Mbits/s.
Moreover the well-known PROFIBUS Slave Core VPC3+C (extended by DP-V2 service “Clock Synchronisation”) is integrated as well.
|
|
|
The Prism Series, designed for corrosive process environments, attaches directly to Sanitary Diaphragm and Angle Valves. This rugged, feature-rich platform, offers a full array of communication and switching options as well as discrete integral pneumatic control for single-acting valve actuator operation.
|
|
|
The Quartz explosion/flame proof design is FM/CSA approved and ATEX certified for use in hazardous environments. And with the epoxy coated anodized aluminum enclosure it may be used in corrosive heavy wash down areas as well.
|
|
|
The Axiom is a discrete valve communication & control device for quarter-turn automated valves. The advanced position sensor offers reliable long-life performance with push-button settings that may be made quickly and conveniently. The integral pneumatic pilot valve offers contemporary features which further enhance the operating performance of your automated valve system. And, with the Axiom's rugged construction will withstand your most challenging plant environments.
|
|
The GP-IP(USB)FL can connect a measuring instrument to a USB port on your PC via GPIB communication. One of the major features of this product is a simple look as it can connect them using a general USB cable in place of a GPIB cable. As the product itself is a USB device, you can easily and quickly install it on your PC. This means you can use the product to enable GPIB communication even from a notebook PC with no expansion board slot or a space-saving PC with few expansion slots via IEEE-48. The product supports USB 2.0 to enable communication at high speed (a maximum of 480 Mbps). The product is bus-powered from the USB port and thus requires no external power supply, resulting in its compact design and best suited for use in a narrow space with a small number of wall outlets available.
|
|
We can offer following interface adapters for your solutions:
* NARS-1F with D15 male / D9 female -connectors, 650 mA fuse, including power supply wires and programming switch
* NARS-1F-4A similar than NARS-1F, but with 4A fuse (to be use only with Epic)
* NARS-2 with D15 male / screw connectors, 650 mA fuse adapter for RS-422 / 485 interface.
* NARS-2-4A similar than NARS-2, but with 4A fuse (to be use only with Epic)
* NARS-1F-4A-SC D15 female / D9 female -connectors, 4A fuse, 2.1 mm DC socket
|
|
| ... products without technical information |
| |
Whether for stock, logistics and distribution, assembly lines and industrial production or for transportation logistics, traffic-control systems and object-positioning - Siemens A&D has always the suitable identification system.
The clever electronic RFID-systems SIMATIC RF with perfect coordinated components identify safely, quickly and efficiently. The non-contact data transfer offers high industry efficiency and the simple systems integration allows an efficient integration into the automation as well as into the IT-field.
|
|
The OP Handheld is a portable lightweight unit with the ability to interface with the OP series read/write tags. The OP Handheld is powered by 2 AA rechargeable or alkaline batteries and has the following features:
LCD backlit display
(2) 112 Byte internal buffers
auto power off
remote read/write wand.
The OP Handheld can read or write 1 block (4 bytes) to 28 blocks (112 bytes) of data within BALOGH OP Series TAGS. The OP Handheld utilizes the PSION Workabout hand held computer, OP Series RFID Wand with Internal Transceiver, and BALOGH custom RFID software.
|
|
| ... products without technical information |
| |
CribMaster Mobile PC's / Bar-Code Scanners
CribMaster Mobile PC's / bar-code scanners come complete with both CM Radio and CM Scan software licenses and a support agreement which means a replacement is provided if repairs are needed. Other accessories are provided depending on the scanner you choose. These scanners are the most durable scanners available and are perfect for most industrial applications. These scanners are available with and without a pistol grip and allow CribMaster users to:
Bar Code or Key Enter Data
Issue and Receive Items
Return Used Items
Cycle Count
Quantity Adjustments
Assemble Kits
Replenish Kits
Transfer
Relocate
Log labor time against work orders
Communicate Real Time with CribMaster
Communicate in Batch Mode
Expand Coverage and Range as Needed
|
|
|
FCI liquid level/interface switches feature Thermal Dispersion technology in which the temperature difference between the two RTDs is greatest in the absence of liquid and decreases when the level element is submerged, cooling the heated RTD. An electronic control circuit converts the RTD temperature difference into a DC voltage signal. Both signals are provided at output terminals to drive two adjustable-setpoint alarm circuits. Both alarms are independently field configurable for liquid level, interface or temperature operation. Since all process media exhibit different heat transfer capabilities, highly sensitive FCI liquid level/interface controllers may be specifically calibrated to detect difficult interfaces between fluids -- including liquids, gases, slurries and foam regardless of their physical properties.
|
|
Thermatel® has demonstrated reliable performance as a flow or level switch. For use as a flow switch, Thermatel can be used to detect either a high flow or a low flow condition for both gases and liquids. For a level switch, Thermatel can be used to detect difference in thermal conductivity of various media. This includes interface detection between media such as liquid/foam, oil/water and even liquid/solid.
Thermatel probes are available in 316L Stainless Steel, Hastelloy C, or Monel with all welded construction. The technology has no moving parts providing excellent reliability.
|
|
|
|
|
|
The CF12 is an AC or DC powered thermal flow switch designed to monitor flow status of liquids and gas and can also be used to detect level. A chain of 8 LED's helps the user adjust the set point by giving a visual indication of the flow rate. In addition, there is a di-chromatic LED, which shows the switch point status of the unit. The sensing element and process connection of the CF12 are made with 316 S.S. and can be Teflon coated when necessary. The enclosure is glass filled nylon but is also available in aluminum for explosion proof applications.
FEATURES
*Simple to install & low in cost
*No moving parts-maintenance free reliability
*Optimal temperature compensation
*Can operate in temperatures up to 248ºF (120ºC)
*Has a maximum working pressure of 4350PSI (300 bar).
*Chain of 8 LED's-Integrated flow rate/set point indication
*Fast response time for flow or level
*Excellent low flow sensitivity
*Can be coated for aggressive mediums
*Insensitive to dirt and most particles
*Available in threaded, sanitary and adjustable insertion length connections
*3A approved
|
|
| ... products without technical information |
| |
|
|
|
|
Application
The ASi switch-mode power supply is a powerful and robust device to power sensitive loads in a hard industrial environment. These features result from the modern construction with a good radio shielding and high reliability integrated in a functional and stable casing. The short circuit proof output DC voltage is 30.5 V. This power supply is optimally suited for loads requiring
high starting currents.
Functional principle
In the ASi power supply a flyback converter operates to transform the energy in two steps. During the conducting phase the diode is blocking, the inductor is energized and a magnetic field establishes. There is no electrical transmission; the consumer load is supplied with energy from the capacitor.
When the switching transistor opens, the blocking phase begins. The current in the inductor cannot change immediately, discharges through the diode and a negative voltage establishes at the inductor.
Now operating like a power source the inductor reloads the capacitor and supplies the consumer with energy. The energy flows from the inductor into the capacitor and the consumer and through the conducting diode back to the inductor.
Technical data
Input voltage: 85-270 VAC / 120-400 VDC
Output voltage: 30.5 VDC
Output current: up to 4.0 Amp
Power: up to 122.0 Watts
Efficiency: 89%
Operating temperature range: -30°C / +70°C
Mounting: on rails acc. to DIN 46277 or wall mounting with screws
|
|
|
AS-Interface networks up to 62 field devices onto a single pair of wires that delivers both signal and power. Actuator Sensor Interface, or AS-Interface, was developed by a group of sensor manufacturers and introduced into the market in 1994. Since that time, it has become the de facto standard for discrete sensors in process industries throughout the world. AS-Interface may be used in hazardous process environments using explosion proof, tray cable, nonincendive and for nonincendive wiring protection concepts.
|
|
| ... products without technical information |
| |
|
|
|
|
InduSoft Web Studio™ is a powerful collection of automation tools that provide all the automation building blocks to develop HMIs, SCADA systems and embedded instrumentation solutions. Utilize InduSoft integrated Web technologies to take advantage of Internet/intranet connectivity. Standard functions included:
• One scalable (150 to 512K tags), rapid development environment ensures portability and hardware independence
• Runs on any current Windows® platform including Windows Mobile®, Windows CE®, XP, Vista and Server Editions
• Built-in interface to SQL relational databases, supporting ERP and MES systems with real time plant floor data
• Automated collection of real time data for Key Performance Indicators (KPI) and Overall Equipment Effectiveness (OEE)
• Remote viewing-Monitor and interact with your applications remotely through a built-in web interface
• Every development/runtime includes support for Alarms, OPC, relational database integration, symbols, recipes, reports, trends, security and over 200 communication drivers
• Conforms to industry standards such as Microsoft .NET, OPC, ADO.NET, ODBC, XML, SOAP, ActiveX, VBScript and DDE
About InduSoft:
InduSoft provides a powerful set of tools to rapidly build HMI, SCADA or embedded applications across a wide range of industries including building automation, industrial automation, oil and gas, water treatment, power generation.
Founded in 1997, InduSoft has more than 125,000 Human Machine Interface (HMI) and Supervisory Control and Data Acquisition Systems (SCADA) operating worldwide.
|
|
|
|
|
|
CitectHMI is an entry level HMI (Human Machine Interface) software designed for OEMs. Based on CitectSCADA, CitectHMI is ideal for both Machine and Panel OEMs who wish to gain a competitive advantage by leveraging the strength of a world-class HMI in their product offering.
With Citect's HMI software, OEMs can:
- Leverage the Citect brand.
- Get a price competitive solution.
- Create a flexible solution that can be tailored to your end user needs.
- Use Citect Professional Services to help configure your CitectHMI and ensure speed to market.
Citect's HMI software is designed for the special needs of OEMs:
- Machinery, plant and equipment manufacturers who require a flexible, easy-to-use operator interface solution
- Manufacturers of PC-based data acquisition systems that need expanded functionality (displays, trending, alarming and historians) in their product offering.
- Operator Panel Builders that require a flexible, branded customizable software interface to differentiate their hardware offerings.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
