|
|
| The MLX90609 Angular Rate Sensor is a full gyroscopic system. A single SMD package contains a high performance Silicon micro machined sensor with signal conditioning circuitry. It operates from 5V supply and is designed for demanding automotive applications. The MLX90609 delivers two output signals proportional to the angular rate parallel to the assembly surface. One of the output signals is in an analog voltage format (the output is 2.5V at zero angular rate and the full scale angular rate produces an output of 4.5V or 0.5V depending on direction of rotation) and the other one is in a digital SPI format. |
|
The collapse of magnetic field due to the interruption by a ferrous gear tooth provides an analog signal output (sine wave) that does not require an outside power source. Variable reluctance sensor or Mag-pickup is suitable for speed sensing with a range from 30 to 1000 inches per second with a target gear from one tooth per revolution to 32 pitch gear.
|
|
Type EGS 4 / Integrated EGS 4 (Option S)
Switching speed range: from 0,63 rpm
programmable within the whole speed range
Error output / System Check
external powered
Type EGS 31/32/33
Switching speed range from 100 rpm
programmable within the whole speed range
Error output
self powered |
|
| ... products without technical information |
| |
The PR0075-A is a High speed color sensor for the measured value admission.
The analog outputs have a dissolution of 12 bits. Thus colors can to be precisely seized and evaluated without conversion of the parameters much brighten at the same time and much darken.
Technical data:
- Erfassungsbereich 400 - 700nm
- Scanning rate 16 kHz
- Scanning rate 32 kHz for difference measurement for environment light suppression
- 3 analog outputs - dissolution 12 bits
- Jitter 9us - dependant on operatings mode
- Exit Chromaticity (X, Y, Z) and tri stimulus (x, y, Z), CMY
- 13 reinforcement stages
- Dissolution 16 bits for each channel
- Internal source of light 2,5W
- parallel collection of all Farbkanäle
- Ethernet interface TCP-IP
- WIN 32 DLL
- Measuring distance dependant on used light conductors and optics between 6-30mm
- Softwaretool for Parametrierung
|
|
| ... products without technical information |
| |
Suitable for all Braime sensors & other industry standard cylindrical sensors
Not affected by shaft or machine vibration
Easy to install, safe
Optional "Magcon" simplifies mounting
Heavy duty all stainless steel version available on request |
|
| Find an amelirate version about ours dustproof under speed monitor SENSOR JET which become GYROJET, more small and more power, the GYROJET possess an integrated inductive detector from 6 to 6000 pulses/min and a preset under speed level, with a quick fitting to shaft and an anti-rotative flexible strap, the GYROJET will permit you to have a totaly control for the speed of your elevator. |
|
The RP-721 line speed and running distance can be easily measured by bringing the detector roller to a running line to rotate it.
The detector is an optical encoder and can output data accurately and stably (but errors due to slipping or jumping may occur because of friction contact).
Various types are available including 2- phase output type allowing subtraction by reverse rotation and low-price type (for measuring speed only). |
|
| ... products without technical information |
| |
Measuring range : from 0/+10 Pa to -10 000/+10 000 Pa
Configurable intermediary and central zero ranges
Air velocity and airflow functions
Interchangeable measuring sensor (SPI technology)
Simultaneous display of 1 to 4 parameters
External transmitter unputs (KIMO class 200 and 300) and thermocouple K
2 output 4-20 mA or 0-10 V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
2 visual (dual color LED) and audible (buzzer) alarms
Software, keypad or remote control configuration
MODBUS network RS 485 system (optional)
ABS or ALU IP 65 housing, with or without backlit gaphic display
Mounting with the 1/4 turn system with wall-mount plate
CP301 : -100/+100 Pa
CP302 : -500/+500 Pa
CP303 : -1000/+1000 mbar
CP304 : -10 000/+10 000 mbar
• Barbed fittings Ø 5,2 mm
• Unit of measurement : Pa, mmH2O, mbar, inWG, mmHG
• Power supply : 24 Vac /Vdc, 115 Vac or 230 Vac
• Outputs : 2 x 4-20 mA or 2 x 0-10 V
• Functions : pressure, air velocity, airflow with Pitot tubes, Debimo and other coefficients, integration of measure, self-calibration, measuring correction factor, temperature compensation : manual or automatic (thermocouple K input). |
|
Measuring range : from 0/+10 Pa to -10 000/+10 000 Pa
Configurable intermediary and central zero ranges
Air velocity and airflow functions
Interchangeable measuring sensor (SPI technology)
Simultaneous display of 1 to 4 parameters
External transmitter unputs (KIMO class 200 and 300) and thermocouple K
2 output 4-20 mA or 0-10 V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
2 visual (dual color LED) and audible (buzzer) alarms
Software, keypad or remote control configuration
MODBUS network RS 485 system (optional)
ABS or ALU IP 65 housing, with or without backlit gaphic display
Mounting with the 1/4 turn system with wall-mount plate
CP301 : -100/+100 Pa
CP302 : -500/+500 Pa
CP303 : -1000/+1000 mbar
CP304 : -10 000/+10 000 mbar
• Barbed fittings Ø 5,2 mm
• Unit of measurement : Pa, mmH2O, mbar, inWG, mmHG
• Power supply : 24 Vac /Vdc, 115 Vac or 230 Vac
• Outputs : 2 x 4-20 mA or 2 x 0-10 V
• Functions : pressure, air velocity, airflow with Pitot tubes, Debimo and other coefficients, integration of measure, self-calibration, measuring correction factor, temperature compensation : manual or automatic (thermocouple K input). |
|
Rheintacho hand-held devices
Rheintacho's tried and tested hand-held units record rotational speeds and run lengths. Some of them use a proximity system by shining a light beam on a reflective mark; others use a contact system with special adapters for different applications.
Redpoint hand-held digital tachometer
The redpoint hand-held digital tachometer is a compact measuring unit for proximity measurement of rotational speed.
It focuses a beam of light at a thin sticker attached to the object, which reflects it at the speed of rotation. The result appears immediately on the 5-digit LCD. The distance between the redpoint and the test object can be up to 600 mm.
Rotaro digital hand tachometer
The rotaro digital hand tachometer is a device for measuring rotational speed and velocity, as well as length. The compact device has two measuring methods. One is optical, and therefore non-contacting; the other is mechanical using an adapter and various probes.
The mechanical method uses a contact probe, which is directly attached to the axis of rotation. A measuring wheel is placed on the adapter to measure velocity or length. |
|
Tachometer RM1500/ 1501/ 1502 ( RM 1500/ 1501/ 1502) :
TECPEL Digital Tachometer Model RM-1500/ RM-1501
Battery operated Non-Contact and Contact RPM measurement
ideal for engines,flywheels, pumps, elevators, conveyers.
Non-Contact RPM measurements for motors, gears, and fans. |
|
For non-contact RPM Measurement
* Large easy to read LCD display
* Hold button freezes displayed readings
* Ergonomically designed and pocket size housing with protective finger guard
* Non-contact integral light beam model with ideal measurement range up to 6" (300mm) distance |
|
JAQUET Handheld tachometer - HO 100, HM 100 and HC 100
JAQUET HO 100 Optical Tachometer
uses precision optics and reflective tape to measure the RPM of rotating devices such as fans and gears.
JAQUET HM 100 Contact Tachometer
uses convex and concave attachments to measure RPM. It also has a built-in wheel to measure the linear surface speed of moving devices such as conveyors and treadmills.
JAQUET HC 100 Combination Set
a combination of the two mentioned above. |
|
Features:
- Contact or non-contact measurements can be selected by attaching the adapter.
- A single unit allows you to measure rotation speed, the speed of an object's perimeter, and the distance traveled along the perimeter.
- The minimum and maximum values, the final measurement, the last 10 measurements and the average of the ten measurements can be stored in memory.
- The energy-saving design allows long, continuous measurements using three manganese AA batteries. |
|
Monarch Instrument Pocket Laser Tach 200 (PLT200) is a digital, battery-powered portable optical tachometer, which operates up to 25 feet from a reflective target using a laser light source. The ergonomic design allows safe, direct line-of-sight viewing of both the target and the display at the same time, while providing a non-slip rubber surface for single hand operation.
Multi-Function
PLT200 is a 32 function Tachometer/Ratemeter, Totalizer/Counter and Timer (stopwatch), which is programmable in both English and Metric rates. Support is
built-in for both our optional Remote Contact Assembly (RCA) and our Remote Sensors. PLT200 has a TTL compatible Pulse Output to trigger devices like data collectors or stroboscopes. The KIT is supplied complete with a Remote Contact Assembly including concave and convex tips and a 10 cm linear speed wheel all in a latching carrying case.
Two Tachs in One
The only portable laser tachometer available with remote sensors Remote Optical Sensor (ROS-P) Gap 36 inches
Remote Magnetic Sensor (MT-190-P) Gap 0.25 inches
Remote Infrared Sensor (IRS-P) Gap 0.50 inches.
If you need the best ... demand Monarch. |
|
Designed for advanced performance, these handheld digital tachometers represent a new standard in design and performance.
The HT-3100 contact-type tachometer features an easy-to-hold curved design and a convenient compartment for storage of a tangential speed measurement ring.
The HT-4100 non-contact type is small and thin enough to fit easily in your pocket. |
|
| Flexible for varying speed checks in processes, at drives, fans, automotive tests. Easily performed by inter-changeable non-contact opto-sensors (Laser also), magnetic sensors, or pulse transmitters. Display to select rotational or linear speed, and length totalizing. Incorporated computer to regard a roll circumference, or a gear ratio. MAX/MIN memory, programmable analog output, data interface. Supply by battery or from mains. |
|
| ... products without technical information |
| |
Product B 148
Technical data - electrical ratings :
Approvals CE conform
Gear precision Synchronous to mains
Nominal frequency 50 / 60 Hz
Power consumption 1 VA
Power supply 24/110/220...240 VAC (50/60 Hz)
Other products available:
|
|
Preselection and multifunction up/down counters 48x48 - CPT4
Totalizers - LCD 24 x 48 (Hour counter/chronometer)
Totalizers - LCD 24 x 48
Total/partial impulse counters - LCD 24 x 48
Hour counters - LCD 24 x 48
Electro-mechanical hour counter CH 48 G
Electro-mechanical impulse counters totalizing - 24 x 48
Electro-mechanical impulse counters totalizing - 36 x 37
Electro-mechanical impulse counters totalizing - 36 x 48
|
|
Features:
Low-cost position or event counter with dimensions 48 x 24 mm and 8 mm LED size
Power supply 10 - 30 VDC
Impulse inputs A, B and Set / Reset input
Counting frequency 15 - 60 kHz, depending on counting mode
Programmable counting functions: (count A with B as up/dn select, sum A+B or difference A-B, quadrature count A/B, 2x90º)
Programmable edge count (x1, x2, x4), adjustable proportional and reciprocal factors 0.0001 - 99.9999
Power-down memory (10 years of data retention)
Easy to set up by two front keys and menu support
Add-on frame for 50x25 mm panel cut-out |
|
Logic Control Units
provide a multitude of information for automation. Frequently, this information has to be displayed on site with good clarity, or processed further and used fordirect control of the process. In helping you to optimally solve these problems, we offer a wide rangeof indicators, counters, tachometers and other secondary switching devices, specifically intended forapplication in conjunction with sensors.
When it comes to signal and impulse control, Pepperl+Fuchs offers you a broad palette of products.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
