|
|
Rectangular steel container for temporary storage of fluorescent light tubes and light bulbd. Flap lid.
Forkliftable.
Removable inner Big Bag included.
Exterior corrosion-proof treatment by oil- and acid- proof polyurethane resins, painted in safe visible colours . Safety labelling according in force regulations.
|
|
Stock batteries SB 60 is a steel receptacle which makes it possible to integrate a polyethylene case of 600 liters for the storage of the worn batteries (60 to 70 batteries). Tubular steel structure; Metal lid rise on 2 compass-gases with handle of opening, lock 2 points and keys. Pastes of fixing on the ground
OPTION: case polyethylene.
SB 60 protects the batteries from the bad weather thanks to its metal lid rise on 2 compass-gases and avoids especially the flight of the batteries since it is equipped with a lock 2 points. it has moreover of the pastes of fixing to avoid any inopportune displacement. Its anti-corrosion completion and painting polyurethane protect it perfectly from the bad weather and rays UV.
|
|
CONTAINERS FOR EXHAUSTED BATTERIES
84/P:
HDPE Container with steel cradle for temporary storage of different waste, assembled and labelled for specific usage. Made of anti-oil and antacid polyethylene, UV treated to permanent exposition to the atmospheric agents, compliant with OSHNER, DIN and AFNOR regulations.
Single mould, reinforced carbon steel cradle allowing the container stacking, lifting, forklifting and tilting.
84/L:
HDPE container for temporary storage of different waste, exhausted batteries, assembled and labelled for specific usage. Protection cradle entirely made of WATERTIGHT steel.
Personal safety and antipollution labelling in compliance with national and community laws.
|
|
|
|
|
|
Container of worn engine oil recovery standard R1000 or R 1500. These containers entirely metal are equipped with a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, they have a respective oil storage capacity of 1250 or 1700 liters and 800 and 1250 liters for the storage of the empty cans. Another characteristics: measure level, counter of discharge of great capacity with shutter of protection and automatic system of locking per float when the collector is full, connection of pumping DNN 50 standardized for the draining of the collector. FRENCH MANUFACTURE
This worn oil collector, entirely metal, is robust and, an increased protection against the fire and vandalism offers. Its broad counter of discharge is equipped with a rain-proof shutter and an automatic system of locking when the collector is full: that avoids any inopportune overflow thus. Its under anti-corrosion layer and its completion in painting polyurethane protects it from the bad weather and of UV and, thus guarantees to him an optimal lifespan. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
These containers of recovery of waste oils of the SEMI type industrial Modhuile are equipped with a double tank of retention out of polyethylene, in conformity with standard XP-H-96618 and the decree of April 7th, 1997. Capacities: 600,1350 or 2500 liters. Broad funnel with boltable lid to pour waste oils. When the collector is full it is enough with the oil pick-up to remove the grid of filtration of the funnel and, to plunge its nozzle of aspiration to carry out draining. Finally it are equipped out of standard with a gauge with level and, of an electronic system of detection of escapes between the 2 tanks.
IN OPTION: Connection fireman DNN 50 if you do not want us that the oil pick-up uses the funnel of discharge to carry out draining collector as it is full.
This polyethylene collector answers perfectly a use in saline medium or corosifs. Simple of use, Their respective capacities of 600,1350, and 2500 liters meet the needs for each one. The gauge of level will enable you to know when the collector is full and will avoid any inopportune overflow. Its double tank of retention, in conformity with the regulations in force avoids any accidental pollution Enfin its system of detection ant-escape between the 2 walls will inform you in the event of escape of the receiving tank. Modhuile indistrielle of SEMI type fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
Container of worn engine oil recovery standard M 1200 cd. This container is équipéd' a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, Its low part out of steel or stainless with an oil storage capacity of 1200 liters and its high part out of polyethylene has a receptacle for the storage of the empty cans of 750 liters. These other characteristics: measure level, counter of discharge of great capacity, connection of pumping DNN 50 standardized for the draining of the collector, ring of levage.FABRICATION FRENCH
This worn oil collector offers an excellent report/ratio QUALITE/PRIX. Its gauge of level will enable you to see when the collector is full and, that will avoid any inopportune overflow thus. Its under anti-corrosion layer and its completion in partly low painting polyurethane protects it from the bad weather and UV; Its high part out of polyethylene is appropriate perfectly for a use in saline medium. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
Bunded Waste Oil Tanks
Tuffa 1400VBWOS
Capacity: 1400 litres / 300 gallons
Dimensions: 1576mm (DIA) x 1800mm (H)
Product Description - Complete with:
* Tundish
* Filter
* Vent
* Easy access yellow flip lid
A Tuffa Waste Oil Tank would benefit businesses in the motoring industry such as Garages, Bus Depots, Haulage companies etc. It will ensure that the waste oil is stored safely and securely at a reasonable price.
The Tuffa bunded waste oil tanks are designed with pollution control in mind and are manufactured to all appropriate current legislations with in the oil industry, pending correct installation. bunded waste oil tanks come in a range of sizes
|
|
|
|
|
|
This container of recovery of waste oils or the effluents (gray water or black water) with double tank of retention, out of polyethylene, is in conformity with standard XP-H-96118 and the decree of the 4/7/1997. With capacity 2500 and 5000 liters, it is equipped with an electric or manual pump and a nozzle of aspiration.
Other characteristics: trap door of access to the boltable pump, measures level, electronic system of detection of the escapes between the two walls, indicator digital of level with remote sensing, Raccord FIREMAN DNN 50.
It at summer especially conceived for the marinas.
it makes it possible to directly aspire waste oils or effluents to the source. Its great capacity makes it possible to space the draining of the collector. Its system of sensing remote when the collector is full allows to the person in charge of management waste not to systematically on the spot check the level of filling of the collector.
Its polyethilene structure protects it perfectly from the saline air and corrosion.
|
|
Metal vat with guard security body tubular or covered with sheet metal for the several barrel or installation of 1 or cubitainers, volume of retention according to the needs; sealing tested in factory; caillibotis of meshs 30 X 30 mm galvanized hot; height under foot 100 mm out of standard; Passage for displacement with the lifting truck and transpallet. Special achievements on mesure.FABRICATION FRENCH
OPTION: raise for barrels or cubitainers, coating antiacids; caillibotis out of antacid fibers, etc ..........
The standard vat of retention "Protec box" is a simple solution and ideal for your liquids requiring a retention in the event of accidental escapes (Pollution) in order to preserve our environment. Its guard of security body tubular or covered with sheet metal on 3 sides avoids the falls of your barrels in the event of displacement of the vat to the lifting truck or transpallet.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Thermobox
Keeps the pellets fresh!
- double-wall thermal insulation
- easy to transport
- robust and durable
- temperature-resistant to -80°C (-112°F)
- food safe
- physiologically harmless and aging-resistant
- TÜV-tested
Standard equipment:
- 2 folding carrying handles
- stackable
- cover opening at the top
features:
- ISO BOX 100
- ISO BOX 200
- frame with wheels / optional
|
|
Olivo Cold Logistics offers a wide range of insulated containers dedicated to the transport and storage of Dry Ice.
From 55 to 600 litres, made of rotomoulded polyethylene or fiber glass,
hight insulation efficiency.
The main players in the Dry Ice Industry are using worldwide
the Olivo containers
|
|
| ... products without technical information |
| |
Fire Protection Container 30 and 90 minute can offer a large area for storing hazardous substances in small containers, drums or IBCs.
Whatever your needs, DENIOS can custom build interiors to suit.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
