|
|
General Description
The FAN8434 is a camcorder one-chip motor driver IC. It is composed of capstan motor driver , drum motor driver and loading motor driver
Features :
* Capstan motor drive block
- 3-phase, linear BLDC motor driver with 3 hall sensors.
- Built-in FG amplifier.
- Forward and reverse rotation function.
- Built-in amplitude limiter.
* Drum motor drive block
- 3-phase soft commutating sensor less drive method.
- Built-in FG amplifier.
- Built-in PG amplifier.
* Loading motor drive block
- Single phase H-bridge driving method.
- 4-mode selection function(forward, reverse,
brake,standby).
* Common block
- Built-in TSD(thermal shut down)
- Built-in 4-normal op-amp.
|
|
|
The PIC-SERVO SC Motion Control Chip is a complete servo motion control system based on the PIC18F2331 microcontroller. It executes all of the real time processes (PID servo filter, motion profiling, commutation, error monitoring, communications) needed for controlling your motor. The simple serial NMC communications protocol lets you easily connect your microcontroller or PC host computer to multiple controller chips.
|
|
MSK offers a large selection of high performance parts for driving or controlling motors. From simple, compact bridges to complete brushless DC torque amplifiers. Our high performance, high reliability products are used on such critical applications as the gimbal drive for the PAC-3 (Patriot Advanced Capability 3) Missile's millimeter wave radar and the thermal imager on the Bradley Fighting Vehicle. Other programs include the steerable antenna on the Predator and Global Hawk UAV's, and many more.
- Output Current from 5 Amps to 600 Amps
- Supply Voltage Range from 55 Volts to 1200 Volts
- Both Hermetic and Plastic Encapsulated Modules (PEM) available
- Fully Isolated Versions Available
|
|
Integrated Circuits
Trinamic offers comprehensive IC solutions to control and drive electric motors. We focus on developing Application Specific Standard Products (ASSPs) for motion control. These dedicated ICs offer an economic approach to time critical motion control tasks thus lowering total system cost.
Extensive experience in IC design and drive technology enables us to effectively serve our customers. Our applications range from high volume automotive and computer peripherals to industrial embedded systems.
|
|
HVICs
* General Purpose ICs
* Single Driver ICs - High Side
* Single Driver ICs - Low Side
* Dual Driver ICs - Low Side
* Dual Driver ICs - Independent Low and High Side
* Dual Driver ICs - Half Bridge
* 3-Phase Driver ICs - Independent Low and High Side
* 3-Phase AC Motor Controller ICs
|
|
|
|
|
|
TMC454
Description
1-axis stepper motion controller with S-ramps and encoder feedback
The TMC454 is the direct successor of the TMC453 and is 100% software compatible.
The TMC454 is a high-end motor controller for all common 2-, 3-, and 5-phase stepper motors. It provides encoder feedback for high reliability or high position resolution drives. A large set of motion control features is included on this IC. The various function blocks are hardwired and „ready-to-use“. All processes can be serialized using the instruction based interface. A complete linear & S-shaped ramp generation unit is integrated within the TMC454. All dynamic parameters can be adjusted for a given application in a very broad range. The CPU is relieved from all time critical tasks like ramp calculation or microstep generation. Thus CPU and software engineer can focus on higher level motion control
jobs. In many applications, the TMC454 reduces the time time-to-market, and it saves costs for software development and hardware engineering. The TMC454 turns stepper motors into easy to use peripherals!
The TMC454 is upwards function compatible to its predecessor TMC453.
|
|
| ... products without technical information |
| |
WATT EUSAS motors are top quality three-phase AC industrial models from Watt Drive’s customer-oriented modular WATT MAS 2000 motor system.
EUSAS stands for EUROPA - USA - ASIEN and means that the wide voltage range and simple voltage selector in the terminal box enable the motor to be operated with virtually any supply voltage and frequency worldwide.
|
|
H-compact
Maximum power - minimum size
The increasing significance of energy-saving, environmental legislation, the desire for even smaller dimensions and the demands of domestic and international markets have led to the further development of the H-compact series that has proven itself over the years.
H-compact motors are used in the widest range of industry sectors - such as oil & gas, paper, chemical industry or steel. In these sectors, they are used to drive compressors, blowers, refiners, crushers and air separation systems.
H-compact is available in a version for direct connection to the line supply and in a version for converter operation.
H-compact is also available in an explosion-proof version.
As a result of its innovative technology, H-compact sets new standards for high-voltage motors.
|
|
As a result of their modular design, the 1R.5 slipring rotor motors (US: wound-rotor motors) can be produced with various cooling systems. This means that the motors can be flexibly adapted to the customers's application.
The enclosed slipring compartment – located inside the NDE bearings – guarantees a high degree of protection for the complete motor, i.e. for the motor and slipring compartment.
Brief overview
Motor type: Slipring rotor
Water-cooled motors: 1RU5 type series
Air-cooled motors: 1RR5 type series
Shaft heights: 400, 450, 500, 560, 630, 710, 800, 900 mm
Power range: 0.3 to 8 MW
Rated voltages: 3.3 - 11 kV
Degree of protection: IP55
Cooling type: IC 611, IC 81 W, IC 01
Type of construction: IM B3 (IM 1001)
Bearings: Roller bearings (up to SH 710), sleeve bearings (from SH 800)
Regulations/Standards: IEC, EN
|
|
N-compact Standardline
N-compact Standardline motors are favorably priced and standardized low-voltage motors. They are based on the technology of our well-proven N-compact series that, for sophisticated applications, already set standards for low-voltage motors.
4-pole N-compact Standardline motors cover a power range from 250 to 500 kW.
|
|
Properties of the three-phase AC motors
The long, slim three-phase AC motors made of extruded aluminium profile are optimally attuned to the CDA3000 inverter and the CDD3000 servocontroller. They usually construct a size smaller than standard IEC motors (with the same output in mode S1) and are dynamic as asynchronous servomotors.
What customizations are possible for three-phase AC motors?
* Protection up to IP66
* Special voltage and special rotation speed
* Specific connection technique
* Different design
* Cast motors
* Special shafts
* Flange adaption
|
|
Asynchronous-/ Main Spindle Drives
With the 1PH motor series, compact motors with different variations are available :
1PH2, water-cooled integrated motors for direct mounting of the motor in the driving shaft
1PH4, water-cooled compact asynchronous motors
1PH6 / 1PH7, air-cooled compact asynchronous motors
Features
Asynchronous motor with squirrel-cage rotor
Almost maintenance-free
Compact design with high power density
High speeds up to 12000 rpm
Integrated, high-quality measuring system for speed and position control
Almost servo quality in conjunction with SIMODRIVE 611
Power spectrum from 3.7 kW up to 100 kW
|
|
FHA-C mini Series Servo Actuators, combining precision Harmonic Drive gearing with AC servo motors, offer unique features unsurpassed by conventionally geared drives. Used in highly demanding industrial servo systems they provide precision motion control and high torque capacity in a very compact package.
Sine-commutated AC servo motors provide smooth torque without the brush wear or commutation limit associates with DC servo actuators. Encoder, mounted directly onto the motor shaft, provide position feedback information. The backlash-free Harmonic Drive gear is provided with grease lubrication specially developed to ensure minimum maintenance requirements and long service life.
The fully digital SC-610 Series Controllers are available for the control of these Servo Actuators. A menu driven setup software running under MS-Windows allows a comfortable parameter optimisation and system diagnosis.
|
|
The muscle behind the motion.
Rugged, robust and reliable, hydraulic motors from Hägglunds can be used just about anywhere on land or at sea. From the bitter cold of Siberia to the blistering heat of Africa, they withstand the challenges of any environment and any type of industry.
Likewise, our motors can drive any application, from small winches to the largest bucket wheel reclaimers. Our broad range of motors covers the whole spectrum of needs, providing either shaft or housing rotation and handling everything from 5000 to 1 400 000 Nm.
|
|
Proving that size matters.
Hägglunds’ Marathon motor is a giant – not only when it comes to size, but also when it comes to performance. By far the largest hydraulic motor in the world, Marathon is specially engineered for extreme, high-torque applications.
Despite its heavy-duty design and intimidating size, the Marathon motor offers excellent controllability and resistance to shock loads. As a result, it lets you handle large, dusty, corrosive and explosive applications with unexpected finesse. Even in extreme heat or freezing cold, a Marathon drive provides years of reliable service.
|
|
The muscle behind the motion.
Rugged, robust and reliable, hydraulic motors from Hägglunds can be used just about anywhere on land or at sea. From the bitter cold of Siberia to the blistering heat of Africa, they withstand the challenges of any environment and any type of industry.
Likewise, our motors can drive any application, from small winches to the largest bucket wheel reclaimers. Our broad range of motors covers the whole spectrum of needs, providing either shaft or housing rotation and handling everything from 5000 to 1 400 000 Nm.
|
|
The new generation of linear motors – one-of-a-kind worldwide – combines extremely high continuous and maximum force with compact construction and the lowest possible force ripple in a single series.
Image Desc
click to enlarge
Image Desc MLP/MLS Series – Synchronous Linear Motors
Highly-dynamic and precise
IndraDyn L is based on the continued development of Rexroth's industry-proven linear motor technology. Select from real-world sizes and lengths:
* Primary units with standard stainless steel housing and integrated liquid cooling
* Optional thermal-encapsulation for the most stringent temperature stability requirements
* Secondary units in 3 lengths, with stainless steel cover plate
|
|
The new generation of linear motors – one-of-a-kind worldwide – combines extremely high continuous and maximum force with compact construction and the lowest possible force ripple in a single series.
MLP/MLS Series – Synchronous Linear Motors
Highly-dynamic and precise
IndraDyn L is based on the continued development of Rexroth's industry-proven linear motor technology. Select from real-world sizes and lengths:
* Primary units with standard stainless steel housing and integrated liquid cooling
* Optional thermal-encapsulation for the most stringent temperature stability requirements
* Secondary units in 3 lengths, with stainless steel cover plate
|
|
Maximum speed of 2500 mm/s, maximum acceleration/deceleration of 3 G,load capacity of 120 kg, and maximum stroke of 4 m.
|
|
|
This driving unit, although compact in size, has a high thrusting force. The moving coil catches the magnetic flux generated by the magnets arranged in the magnet shaft and converts it into the thrusting force efficiently. As this structure requires no frame, it is compact and light weight.
|
|
| ... products without technical information |
| |
Intelligence and high power density in a tiny space
maxon's compact drives feature controllers, sensors and motors in a modern aluminium casing, which, when combined with existing compatible maxon products, produce robust, space-saving and high power density drive solutions. The new MCD EPOS is a highly dynamic, maintenance-free positioning drive with a fieldbus connection and a maximum 60 watt output.
maxon's compact drives are ideal, in that they take up very little space yet provide excellent functionality. They are also extremely flexible and can be used, for example, in automation, robotics or even for laboratory applications. The MCD EPOS combines a brushless maxon EC motor, a digital encoder MR and a fully digital EPOS positioning controller. Cost-savings have been made thanks to the careful optimisation of components, creating an unrivalled and competitively priced drive that works out slightly cheaper than the price of the individual parts.
|
|
... see all the products in the category
Clutches
|
|
|
|
|
- Smallest Linear Slide with High-Speed Linear Motor Drive
- 20 mm Travel Range
- Velocity to 500 mm/s
- Acceleration to 20 g
- Resolution to 50 nm
- Self-Locking
- XY-Combinations Available
- 20,000 h MTBF
- Vacuum Versions to 10-7 hPa
PILine® - Ultimate Motion in the Smallest Package:
PILine® M-661- and M-662-series piezo motor linear slides are the smallest high-speed piezo-motor-driven translation stages currently available on the market.
Working Principle:
M-661 and M-662 linear stages have a new, patented, ultrasonic drive developed by PI. The highly compact, integrated P-661 piezomotor drive can provide accelerations of up to 20 g and velocities of 500 mm/s and more, together with high resolution and holding force. Because the ceramic stator is pressed against a slider of the stage, piezomotors resist motion with an intrinsic holding force when the stage is at rest. The result is very high position stability without the heat dissipation common with conventional linear motors. Furthermore, there are no gears, leadscrews or other mechanical components to contribute play or backlash.
|
|
saia motor controller
Caractéristiques :
• logiciel destiné au développement, au test et à l’optimisation de systèmes de moteurs pas à pas
• logiciel fonctionnant sous Windows
• logiciel simple d’utilisation
• réglage rapide des paramètres
• visualisation de la vitesse et de la position
• courses de positionnement
Dimensions (mm) :
Boîtier en métal 160 x 100 x 30 (euro-PCB)
Pilote : pour moteurs polaires et bipolaires
Tension d’alimentation (V/CC) : de 3 à 55 V/CC – 24 V/CA
Alimentation du moteur:
tension constante et courant continu (commandé par hacheur)
Mode de pas : pas entier, demi-pas et micro-pas
Source d’impulsion : interne, programmable
Entrées de commande :
• 3 entrées numériques
• 4 sorties signal
• 1 entrée analogue 0 … 10 V/CC
• contact à relais
Configuration : RS 232, USB
|
|
The development kit DVK90109 has been developed by Melexis to create specific applications using 125 kHz protocols and to evaluate the advantages of the MLX90109 transceiver IC.
The DVK90109 results of the combination of the development board DVKRFID and the evaluation board EVB90109. The EVB90109 is plugged on the DVKRFID through a 10 pins connector (including Coil, VCC and Ground) and controlled by the microcontroller ATMEGA128.
A set of commands has been elaborated by Melexis to define the communication between the Computer and the evaluation board EVB90109.
Other products available:
|
|
|
|
see the results for the following category : 
