|
|
K-2 Series AC Induction Motor
Horsepower: 1/1600 to 1/200 HP
Rated Torque: 0.31 to 3.2 oz-in
Phase: Single Phase
30R Series AC Induction Motor
Horsepower: 1/40 to 1/30 HP
Rated Torque: 10 to 20 oz-in
Phase: Single Phase
34R Series AC Induction Motor
Horsepower: 1/15 to 1/5 HP
Rated Torque: 38 to 119 oz-in
Phase: Single and Three Phase
42R Series AC Induction Motor
Horsepower: 1/12 to 1/4 HP
Rated Torque: 48 to 148 oz-in
Phase: Single and Three Phase
48R Series AC Induction Motor
Horsepower: 1/5 to 1/2 HP
Rated Torque: 112 to 296 oz-in
Phase: Single and Three Phase |
|
Johnson Motor Universal motor
Dimensions: Ř 61.8 x 106.2, flat 53, shaft Ř 8.005 mm
Supply: nominal 230 VAC
Torque:
@ stall 0 mNm
@ rated load 156 mNm
@ max. efficiency 289.89 mNm
@ max. power 413.56 mNm
Speed:
@ no load 24900 rpm
@ rated load 17100 rpm
@ max. efficiency 14300 rpm
@ max. power 11800 rpm
Power:
input @ rated load 518 W
input @ max. efficiency 773.5 W
output @ rated load 280 W
output @ max. efficiency 433.7 W
output @ max. power 498.6 W
Max. current:
@ no load 1.17 A
@ rated load 2.61 A
@ max. efficiency 3.65 A
@ max. power 4.64 A |
|
Johnson Motor Universal motor
Dimensions: Ř 54 x 10, shaft Ř 4.5 mm
Supply: nominal 120 VAC
Torque:
@ rated load 25 mNm
@ max. efficiency 25.22 mNm
@ max. power 35.47 mNm
Speed:
@ no load 34427 rpm
@ rated load 13500 rpm
@ max. efficiency 15681 rpm
@ max. power 12530 rpm
Power:
input @ rated load 95 W
input @ max. efficiency 95 W
output @ rated load 36 W
output @ max. efficiency 41.51 W
Max. current:
@ no load 0.38 A
@ rated load 0.83 A
@ max. efficiency 0.96 A
@ max. power 1.16 A
|
|
BM series are asynchronous, three phase, self-braking. BM series power range is from 0.06 kW up to 11 kW. The motor brakes in case of power supply failure. The brake supply is DC as standard with the rectifier built in the terminal box. On request is possible to have a separate brake supply. The rectifier is supplied with an over-voltage and radio frequency emission protection.
BM series is projected to withstand high overheating guaranteeing high reliability, also under severe operating conditions.
BM series is suitable to be controlled by inverters. The winding insulation class is F. Class H available on request.
Motor enclosure is TEFC, IP54 protection degree (IP55/IP56 available on request). An hexagonal hole is present on the shaft end to allow manual rotation (up to 132 frame size). All the BM series motors can be provided with the brake hand release.
Shields and flanges are aluminium made for motors up to 90 frame size, and cast iron for motor frame size from 100 up to 132. On request 132 frame size motors can be supplied with cast iron frame.
BM series main features are a robust construction, an extremely silent running and braking, the gradual braking action and motor starting, and a notable compactness in dimensions. All MGM motors are CSA approved.
|
|
ASYNCHRONOUS THREE-PHASE MOTOR WITH VERY HIGH- TORQUE A.C. BRAKE - series AMF
FRAME SIZE:
63 ... 160
OUTPUT:
0.12 ... 22 Kw
POLES:
2, 4, 6, 8 (pole changing on request)
INSULATION CLASS:
F
MOUNTING:
IM B3, IM B5 and IM B14 standard and special
DEGREE OF PROTECTION:
IP54 (IP55 on request)
MOTOR FEATURES:
output power on S1 duty
2 and 4 poles motors conforming to EFF2 class efficiency (EFF1 class Efficiency on request)
external fan (IC411)
aluminium frame
BRAKE FEATURES:
electromagnetic spring-loaded brake with release in case of power supply interruption
very high braking torque (Mb > 2 MN)
continuous braking torque adjustment in the range 30% ... 100% Mb max
standard braking torque setted at 70% Mb max (on request 30% ... 100% Mb max )
double braking surface
asbestos-free friction surfaces
high braking capacity, powerful and precise
standard brake supply: 230/400V-50 Hz with separate terminal block (brake supplied directly from the motor terminal block available on request)
DC brake available on request (same braking torque features of ac version)
axial hand release always supplied loose
SPECIAL EXECUTIONS:
efficiency values conforming to EPAct; flywheel, anti-sticking brake disk; degree of protection IP56
TYPICAL APPLICATIONS:
heavy duty, lifting, cranes/bridge cranes, ceramic machines and wherever a very high intervention frequency and a powerful and precise braking is required |
|
| ... products without technical information |
| |
Single-phase capacitor motors Series KD.1 and three-phase motors Series DR.1
The motors are solidly designed and are maintenancefree for life.The multi-grooved stator contains a threefold winding which, together with the phase-shifting capacitor, creates a symmetrical rotating field at the rated working point of the motor.The rotor is of the squirrel-cage type. Two- or four-pole motors with a variety of design Iengths and diameters provide rated torques from 0.75 to 12.6 Ncm. Can be combined with reduction gear units, brakes, and tachogenerator systems.
|
|
For simple and rugged pump operation, Micropump AC motors are the choice you can rely on. The drives are supplied with a driving hub and adapter plate that allow a wide-rand of magnetically driven gear pumps to be fitted using just two fixing screws. The result is fast and simple installation. The motors are available in either single- or three-phase configurations. IP 55 motor enclosure ensures protection of internal parts against dust and water.
Performance Summary
- IEC 56, 63, or 71 frame sizes
- Available power 0.09, 0.24, 0.25, 0.37, or 0.73 kW
- Torque from 0.31 to 1.7 Nm
- 1340, 1380, 1400, 2680, 2830, 2880, or 2900 rpm ratings
- Voltage 220/240 230/400 or 255/440
|
|
AC Gearmotors
Baldor AC Gearmotors are available in a wide variety of torques ranging from 15 to 627 in-lbs in both right angle and parallel shaft designs with industry standard mounting configurations. The Right Angle single reduction units feature an Internal Expansion Bladder and Mobil® SHC634 Synthetic oil for long maintenance free operation. The Internal Expansion Bladder keeps the lubrication free of contaminates by eliminating the need to vent the gearbox and allows all position mounting. This feature is exclusive to Baldor.
|
|
K-2 Series Parallel Shaft AC Gearmotor
Horsepower: 1/2000 to 1/300 HP
Rated Torque: Up to 120 oz-in continuous
Phase: Single Phase
30R-D Series Parallel Shaft AC Gearmotor
Horsepower: 1/50 to 1/30 HP
Rated Torque: Up to 40 lb-in continuous
Phase: Single Phase
34R-Z Series Parallel Shaft AC Gearmotor
Horsepower: 1/15 HP
Rated Torque: Up to 100 lb-in continuous
Phase: Single Phase
34R-W Series Parallel Shaft AC Gearmotor
Horsepower: 1/15 - 1/9 HP
Rated Torque: Up to 175 lb-in continuous
Phase: Single Phase
42R-E Series Parallel Shaft AC Gearmotor
Horsepower: 1/12 to 1/4 HP
Rated Torque: Up to 341 lb-in continuous
Phase: Single and Three Phase
42R-HG Series Parallel Shaft AC Gearmotor
Horsepower: 1/5 HP
Rated Torque: Up to 559 lb-in
Phase: Single Phase
48R-F Series Parallel Shaft AC Gearmotor
Horsepower: 1/3 to 1/2 HP
Rated Torque: Up to 250 lb-in continuous
Phase: Single and Three Phase |
|
• AC Gearmotor and stepper motor
• Many possibilities of coupling among motors and gearmotors
(as shown in our catalogue).
AC Motors
• Power supply: from 12 to 230Vac, 50 and 60 HZ
• Running torque: from 8 to 600 Ncm
• Output shaft speed: from 0,07 to 75 rpm |
|
Shaded-pole AC motors - robust and value for money.
Induction AC motors - a high degree of effectiveness and a long life span.
Three-phase AC motors - high power density and best efficiency. |
|
| Geared motor with bs series brushless servomotor, integrated with precision planetary 1-2 stage reduction unit. Reduced backlash available on reguest. |
|
AC synchronous geared motor with flat transmission ASM fG 05 or 20
|
|
107 AC
115/230V PSC TEFC AC Design
AC Parallel Shaft Gearmotors: 207 AC
115V Shaded Pole Open Fan Cooled AC
115V Totally Enclosed Fan Cooled AC Design
Product Features
Castings: Zinc Die Castings
Lubrication: Grease
Gears: Phenolic High Speed and Hardened Steel Ball Bearings On Motor
Mounting: All Positions
Rotation: Reversible
Seals: O-Ring Type On Output
Agency Approval: UL & CSA
Other products
307 AC
115V Split Phase, Open Dripproof AC Design
407 AC
115V Split Phase, Open Dripproof AC Design
507 AC
115/230V PSC, TENV AC Design |
|
607AC
115/230V PSC, TEFC AC Design
Product Features
Castings: Zinc Die Castings
Lubrication: Grease
Gears: Steel
Worm: Hardened Steel
Ouput Gear: Cast Iron
Bearings: Porous Bronze Sleeve on Gear Case, Ball Bearings on Motor
Mounting: All Positions
Rotation: Reversible
Seals: Lip Seal on Output
Agency Approval: UL & CSA |
|
ASTRO synchronous motor with Stirnradgeriebe ASM SG
- starting and direction of rotation-stably
- synchronous, load-independent number of revolutions
- blockierfest briefly
- 1-polig reversable
- high efficiency
- noiseless run
- high self retaining moment
- maintenance-free
Overall lengths
ASM 24/26 SG = 89,5mm
ASM 44/46 SG = 109,5mm
ASM 84/86 SG = 149,5mm
Terminal box execution = 33mm longer
Engine system
4-polig with 1.500Upm (50Hz), 1800Upm (60Hz)
with 6 pins with 1.000Upm (50Hz), 1200Upm (60Hz)
Rated voltages = 1~24V to 3~500V
Continuous operation S1 (special modes of operation possible)
Self retaining moment in the dead condition
Wärmeklasse B
Coil windings = to 130°C
Ambient temperatures = -15C to 40°C
Enclosure = IP40, IP54, IP55
Basic parts = plastic or aluminum pressure pouring
Kind of connection = cable, braid or terminal box connection
|
|
ASTRO gear motor with flat transmission ASM SG01
|
|
ASTRO synchronous geared motor with planetary gear ASM PG
|
|
AC ASTRO synchronous geared motor with worm gear
ASM SSG
|
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed, with external ventilation. Thermal safety feature (single - phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With casing in die - cast aluminium. Case - hardened and hardened gear pairs with shafts rotating on roller bearings. Lubrication with long - lasting oil. Sealing rings made in special rubber for high temperatures. 14 gear ratios (i) available, from 6.48 to 372.8. Rated torque 20 Nm. Version B3 or B5. |
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed, with external ventilation. Thermal safety feature (single-phase-model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With casing in die-cast aluminium. Case-hardened and hardened gear pairs with shafts rotating on roller bearings. Lubrication with long-lasting oil. Sealing rings made in special rubber for high temperatures. 15 gear ratios (i) available, from 7.4 to 441.9. Rated torque 5 Nm. Version B3 or B5. |
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation. Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing. Wheelbase 32 mm. Wheel rim in special bronze 120-160 HB hardness. Worm gear in hardened steel with grinding thread rotating on ball and roller bearings. Lubrication with special long-lasting oil. Sealing rings made in special rubber for high temperatures. 9 gear ratios (i) available, from 7 to 100. Rated torque 20 Nm. Version B3 or
B5. B5/S left version - B5/D right version. |
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation. Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing. Wheelbase 26 mm. Wheel rim in special bronze 110 HB hardness. Worm gear in hardened steel with grinding thread rotating on ball and roller bearings. Lubrication with special long-lasting oil. Sealing rings made in special rubber for high temperatures. gear ratios (i) available, from 7.5 to 80. Rated torque 9 Nm. Version B3 or B5. B5/S left version - B5/D right version. |
|
MOTOR: Asynchronous-single and tree-phase-2 pole. Enclosed with external ventilation. Safety thermal cutout. Class F winding according to VDE0530 standards. Insulation IP65 according to CEI EN 60529 standard.
GEAR UNIT: With die-cast aluminium case (UNI 5076). Centre distance 20 mm. Bronze ring with hardness 110 HB. The screw is made of hardened steel with ground thread. The grommets are made of fluoridised polymer (FPM). Lubrication with synthetic oil (EP). 6 reduction gear ratios are available: 10/15/25/45/60/80. Maximum rated torque is 3 Nm. Manufacture B3/B14. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
