|
|
BM series are asynchronous, three phase, self-braking. BM series power range is from 0.06 kW up to 11 kW. The motor brakes in case of power supply supplier failure. The brake supply is DC as standard with the rectifier built in the terminal container. On request is possible to have a separate brake supply. The rectifier is supplied with an over-voltage and radio frequency emission protection.
BM series is projected to withstand high overheating guaranteeing high reliability, also under severe operating conditions.
BM series is suitable to be controlled by inverters. The winding insulation class is F. Class H available on request.
Motor enclosure is TEFC, IP54 protection degree (IP55/IP56 available on request). An hexagonal hole is present on the shaft end to allow manual rotation (up to 132 frame size). All the BM series motors can be provided with the brake hand release.
Shields and flanges are aluminium made for motors up to 90 frame size, and cast iron for motor frame size from 100 up to 132. On request 132 frame size motors can be supplied with cast iron frame.
BM series main features are a robust construction, an extremely silent running and braking, the gradual braking action and motor starting, and a notable compactness in dimensions. All MGM motors are CSA approved.
|
|
BA series motors are asynchronous, three phase, self-braking. BA series power range is from 0.25 kW up to 45 kW. The motor brakes in case of power supply specifications failure.
The brake supply is AC as standard. On request is available a DC brake (the rectifier is enclosed in the conduit box) and or a separate brake supply.
BA series is projected to withstand high overheating guaranteeing high reliability, also under severe operating conditions.
BA series is suitable to be controlled by inverters. The winding insulation class is F. Class H available on request.
Motor enclosure is TEFC, IP54 protection degree (IP55/IP56 available on request). An hexagonal hole is present on the shaft end to allow manual rotation (up to 132 frame size). All the BA series motors are provided with the brake hand release.
Shields and flanges are aluminium made for motors up to 90 frame size, and cast iron for motor frame size from 100 up to 132 mm. On request 132 frame size motors can be supplied with cast iron frame.
Frame, shields and flanges are cast iron made from 160 up to 225 frame size.
BA series main features are the robust construction, a very short braking time, an high and constant braking torque, frequent and heavy braking cycles, rare and easy maintenance. All MGM motors are CSA approve
|
|
Features:
-Spring set brake
-Power off operation manual release
-Resets automatically
-Brakes internally connected to motor on 215T and smaller.
Applications:
Centre tools, conveyors manufacturers, professional door operators, speed reducers, any application requiring quick stop and hold. |
|
The IEC-normalized BN motors comply with all the applicable international standards, including the EMC and LV Directives. They are available in the 0.06 - 30 kW range in the foot and the flange mounting version, the latter in both the IM B5 and the IM B14 configuration. Single and dual pole version available with generally, three brake options offered, one DC and two AC supply, lending further flexibility to the system. Finally, all motors are industrial inverter duty.
|
|
LS FMC Series
Single phase and three-phase asynchronous braking motors , series LS with failsafe brake and continuous current (dc) coil.
Power 0.06 to 0.37 kW ; frame size 56 to 71, 4 and 6 poles ; 230/400 V.
Direct on line starting on 230 V or 400 V three phase supplies.
- delta connection (Ä) at 230 V,
- start connection (Ä) at 400 V.
Single phase operation at 230 V +10% 50 Hz.
FCPL Series
Enclosed three-phase asynchronous brake motors , FLS series with failsafe continuous current (dc) brake, according to IEC 60034, 60072, EN50281.
Separate supply to the motor and the brake. Voltage 180.
Protection: IP 55 protection for the motor, IP 44 protection for the brake.
FCR Series
Enclosed three phase asynchronous brake motor, series LS with failsafe brake, according to IEC 34, 72, EN 50281.
Brake motor protection: IP 55 protection providing good sealing against projected liquid and dust in an industrial environment. |
|
Standard Features
Output: 0.12 up to 7.5kW
Multivoltage – (220-240/380-415//440-460V or 380-415/660-690//440-460V)
Self Ventilated (TEFC)
EFF2 Improved Efficiency
Cast Iron Frames (63 up to 132M)
Mounting: B3T
Degree of Protection: IP55
Terminal block manufacturers
Squirrel cage rotor/ Aluminium die cast
V´Ring on both endshields
Stainless steel nameplate AISI 316
Class “F” insulation
Continuous duty
Ambient temperature: 40ºC, 1000 m.a.s.l.
Metric thread cable entries in terminal rack
Suitable for Industrial inverter Duty applications*
Paint color: RAL 5007
*For additional details about Inverter operation, please contact our technical support.
*Special Insulation for voltage above 575V
Optional Features
Single Voltage (other voltages)
Other mounting configurations
Thermal protection:
Thermistors for frame 132S and below (Standard for frame 160 and above)
Manufacturers of thermostats
RTD-PT 100
Space heaters
Class “H” insulation
|
|
Delphi ATDC series self-braking motors use spring-pressure brakes, firmly spliced onto a cast iron shield at the back of the motor.
These motors include:
+ The hand release lever that permits to release the brake, making it possible to move the shaft.
+ The separate brake switched mode power supply that is achieved, whenever needed, by connecting directly to the brake terminal board located inside the motor terminal case.
+ The PTO thermal protectors in the winding
Delphi ATDC series maintain also the peculiarities described in the Delphi series catalogue
|
|
| SEW-Eurodrive's squirrel-cage motors and brakemotors deliver exceptional performance and reliability combined with low maintenance. Designed for continuous duty under tough service conditions, these low-noise brakemotors are used wherever fast, industrial safe braking is a major application requirement. |
|
Design with single-disk, spring brake
Main applications equipment tools, timber processing, drive technology, transmission, process technology
Special applications industrial winches, jetways, elevators, stage equipment, printing machines, packaging machines
Performance range 0,06 - 37 kW
Size 56 - 200 |
|
| With the X-Class, Force Control transforms oil-shear technology into affordable, off-the-shelf designs. Four standard models-XB1, XB2, XB3, and XB4, covers the most popular size range for brakes. Convenient double C-face or motor professional brake mounting and Clamped-Split-Quill allows drop-in, bolt-up installation. |
|
Self-braking three-phase motors - Series 10.. with direct-current safety braking - One speed motors
- Two speed motors, one winding (Dahlander)
- Two speed motors, two windings
Self-braking single-phase motors - Series 10... with direct-current safety brake motors with always-on industrial capacitor
- Motors with three wires (balanced windings), with always-on capacitor
Self-braking three-phase motors - Series 11... with soft start and progressive braking,
with direct-current brake - One speed motors
- Two speed motors, two windings
|
|
- Series: B... 63 to 355
- Output range: 0.12 kW to 500 kW, higher output ratings available on request
- Speeds: 3,000; 1,500; 1,000; 750 rpm, pole-changeable versions available on request
- Brake types: Lenze BFK458, KEB .08.210, Mayr 800.410.3, Stromag BZFM
- Features: Energy-efficient and environment-friendly, designed to DIN EN 60034 (IEC 72), mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, class F insulation with thermal reserve, class H available as an option, terminal case optionally top-mounted, RHS or LHS up to frame size 315, various modifications possible |
|
| ... products without technical information |
| |
Closed loop controlled current Power supply supplier included in a very compact enclosure with integrated Din track fixing system.
Current regulation based on microcontroller technology, offering accurate current output control, high level of protection against transients (short circuits & circuits opening), and very easy setting-up.
|
|
The Wichita Altra Sonic is a potentiometer-regulated ultra-sonic based tension control system designed to maintain stable web tension during
the steady running phase of paper, film and foil converting machines.
Simple to set up and use, the Wichita Altra Sonic is an analogue device that enables users to save over 50% of the cost of buying and commissioning a more complex digital control system.
Easy set-up
Setting up the controller is straightforward. The Altra Sonic receives its input from a scalable ultrasonic sensor manufacturers. The sensor scaling is achieved with just a few button industrial presses.
|
|
With MEROBEL’s new DGT300, Web Tension Control has never been so easy to manage.
The newest Digital Controller from MEROBEL combines, in a smart and low profile front face enclosure, the most simple user’s interface with the most advanced technical features.
Designed for both closed loop and open loop tension control, the DGT300 is the up-to-date turnkey solution for unwinding, rewinding and intermediate tension control applications.
Allowing 100% setting up through its user’s friendly Windows PC interface, or through its front panel professional keyboard, the DGT300 includes all the requested web tension control specific functions : E-stop, soft start, hold & release, taper tension, no-stop splice turrets. Analog set point input is also available for using distant professional remote control with SUPPLIER OF PLC analog output or potentiometer.
Allowing direct input of industrial position sensors, US sensors, or any kind of suppliers of load cells technology signals, the DGT300 design gives the benefit of fully digital calibration procedure as simple as 1-2-3 (no switch, strap, or resistance).
|
|
From 1992, over 3000 MW.90.10 systems have been installed, solving numerous tension problems in conjunction with Manufacturers of load cells, Dancing Rolls, or Sonar.
The real news, however, is that the Microprocessor MW.90.10 is the first system to allow open loop professional control of mixed systems using one common control. Load Cells and Sonar, Dancing Rolls and Sonar, and Load Cells with Tacho Professional generator.
The high professional standard of design ensures the function reliabiiity, repeatability, and precision of the Professional display values.
Personalised operating parameters are stored in the Microprocessor's professional memory, which can be recolled easily, speeding up machine changeovers and so increasing productivity. Easily calibrated, small in size yet high in quality and performance, the MW.90.10 offers excellent value. |
|
Designed for precise closed loop tension control, the Spyder is capable of controlling web tension in unwind, rewind, point-to-point or dancer applications. It measures tension from one or more MAGPOWR load batteries and outputs a corrective analog signal to control a torque device. Its reduced
size means it can be hidden away in an enclosure or underneath the machine.
With its ethernet connection, the Spyder can be viewed on a web browser for remote troubleshooting, programming and/or data collection. Additionally, the Spyder provides an analog input for Manual Level setpoint, control inputs for Run/Stop, Auto/Manual: Tension On/Off, and E-Stop, and a 0-1 mADC meter output proportional to measured tension.The Spyder is a cost effective, easy-to-use control capable of delivering advanced features such as adjustable taper tension to nearly any application... |
|
| With safety a high priority, White Drive Products offers motor/brake combinations for applications were braking is needed. With displacements ranging from 3.2 - 127.7 cid [52 - 2093 cc] and holding torques up to 14,000 lb-in [1582 Nm], White Drive Products offers a variety of solutions when braking is a must. |
|
| Electronic DC braking, suitable for all asynchronous motors, especially suitable for retrofitting into existing plants, extending the life of drive units by infinitely variable braking torque, wear-resistant and maintenance-free |
|
PETER electronic has added the compact type series VersiBrake 230/400-25 L (LP) to its tried and tested product line of electronic DC brakes. The device, which features an upgraded power section designed for a rated device current of 25 A, is available either as a housing version or as a circuit-board version for rated motor currents up to 12.5 A. In preparation for the certification by the German Trade Association (Technical Committee for Wood), VersiBrake 230/400-25L (LP) already now meets the association's requirements for category 2 acc. to EN 954-1. VersiBrake 230/400-25 L (LP) features double safety protection: i.e., control via motor contactor and motor voltage detection. In addition, a surge suppressor circuit and a braking current infinitely variable between 0 and the rated device current reduces the failure probability of the braking device and thus indirectly that of the machines, too. An integrated overload monitoring function, which, if the braking frequency is too high, prevents motor restart, provides safety both for the VersiBrake and the operator. The integrated and adaptable motor standstill detection gives the user flexibility with regard to the motor types available.
|
|
|
|
see the results for the following category
