|
|
Output rating from 100 to 3150kW (135 to 4000HP)
Voltages from 220 to 6900V
Speed from 3600 to 600rpm
With simple and compact construction, H Line motors are widely used due to their high reliability making them suitable for the majority of the driven machines found in industries.
The frame construction consists of a high resistance solid block and it is fitted with external cooling fins. The whole cooling system, which consists of an internal and an external air flow, provides an homogeneous blow of cooling air inside the frame for maximum performance of such motors.
Main advantages in using WEG H Line motors include:
- High efficiency
- Degree of Protection IP(W)55 / IP(W)56 / IP(W)65 (TEFC, TEBV)
- Reduced noise level
- Low and easy maintenance
- Robust solid high strength cast iron construction
Can be built to meet IEEE841 (2001) mill and chemical duty Can be built to meet API541 standards
- Bearings
Oil lubricated sleeve bearings
Grease or oil lubricated ball or roller bearings
- Cooling
Self cooling
Forced cooling, usually required for VFD applications.
- Interchangeability with existing motors
- Internal air flow
- Heat exchanger not required.
|
|
GE Motors has been manufacturing rotating electric machinery for over 100 years. Power ratings in this series range from approximately 1000 HP to 100,000 HP. Over 600 MW of variable-speed AC experience alone has resulted in GE Motors building a rich tradition of technical excellence, quality and reliability.
Industries: Oil&Gas, Power& Energy, Mining, Cement, Metal, Marine, Pulp & Paper, Water & Wastewater, Other Process Industries
Features and Benefits
- Adaptability: Each large synchronous machine is custom-designed to meet your specific application.
- Quality: GE Motors ISO 9001 certified. This ensures that high international standards of quality are met in every aspect of the business - from the initial marketing contact through to design, manufacturing,installation and servicing.
- Global Presence: GE Motors and GE Industrial Systems have locations to serve you throughout the world.
- Performance: Synchronous motors can be designed to operate with leading power factor. This feature helps balance out your plant's power system, thus lowering your energy costs. GE Synchronous motors offer you the benefits of high efficiency which reduce operating costs. An added benefit is low inrush current for minimum system disturbance during starting. GE Synchronous motors are designed to match the starting torque requirements of the driven equipment without sacrificing running performance.
Applications:
- Fans
- Pumps
- Compressors
- Metal rolling mills
- Grinding mills
- Mine hoists
- Pulp & paper refiners
- Small hydro generators
- Marine propulsion
- Gas & steam turbine generators
|
|
|
the assisted power cooling system of the Delphi SV series is three-phase 400/50 440/60, IP55, with separate terminal box
|
|
Product Overview: VHECP2394T
Description: 15HP,3525RPM,3PH,60HZ,254HP,0934M,TEFC
Ship Weight: 285.000 lbs.
List Price: $ 2990.00
Multiplier Symbol: L1
- Corrosion resistant epoxy finish
- Cast iron construction
- Designed for vertical mounting
- Rotatable conduit box
- Stainless steel nameplates
- Shaft seals
- Energy efficient windings
- Two lifting lugs
For medium and high thrust in-line pump applications. Waste water treatment plants, petro chemical industries, pulp and paper mills and agricultural irrigation applications.
|
|
Single-phase motors of the BS series are manufactured to the applicable IEC standards and are of the enclosed type, externally ventilated and with run capacitor permanently connected.
Motors are available in the B5 and B14 flange mountings, in the 4-pole execution. For applications requiring high starting torque the version with both the run and the starting capacitor can be specified.
|
|
FRAME SIZE:
56 to 100
OUTPUT:
0.09 to 2.2 kW
POLARITY:
single - 2, 4, 6 poles
RATED FREQUENCY:
50 or 60 Hz
MOUNTING:
IM B3, IM B5, IM B35, IM B14, IM B34
DEGREE OF PROTECTION:
IP55
MAIN FEATURES:
motors comply with IEC requirements
TEFC construction
temperature rise to class B
aluminium design
with starting capacitor (series AMME)
dual-voltage 115/230 V (series AMD)
dual-voltage with starting capacitor (series AMDE)
OPTIONS:
cURus certification
CSA certification
wide range of special mechanical and electrical executions
special electrical design for low noise and vibration level
|
|
All motors are available in several designs. The power range starts at 0.09KW and stops at 2.2 KW in a aluminium case.
The technical construction of all motors is based on IEC and VDE.
The motors are available wit B3 feet, B5 flange or B14 flange.
All motors contains an operating capacitor an 3 PTC-thermistor for temperature monitoring.
|
|
Pacesetter 30R AC Inverter Duty Motor
Quintsulation 5-stage insulation system designed to meet NEMA MG 1-1993, Section IV, Part 31.
230VAC, 60 Hz, 3-phase for operation with a wide range of inverter products.
Inverter-Grade magnet wire and Class "F" insulation system for increased protection against spikes and corona damage caused by the inverter.
UL recognized for construction, CSA certified, and in compliance with the Low Voltage Directive "CE".
Standard Features:
Totally enclosed, non-ventilated IP-20 rating.
Class "F" insulation system for long life.
Aluminum endshields for high thermal efficiency and light weight.
Permanently lubricated, noise tested ball bearings.
Locked bearing design minimizes shaft endplay.
Application Information: Face mounting is standard.
|
|
FRAME SIZE:
56 to 160 - aluminium deign
180 to 315 - cast iron design
OUTPUT:
0.09 to 22 Kw
30 to 200 kW
POLARITY:
single - 2, 4, 6, 8 poles (series AM)
pole-changing - 4/2, 8/4, 4/6, 6/8 poles (series AM and AMV for fan drives)
RATED FREQUENCY:
50 - 60 Hz
MOUNTING:
IM B3, IM B5, IM B35, IM B14, IM B34
DEGREE OF PROTECTION:
IP55 or higher
MAIN FEATURES:
motors comply with IEC requirements
TEFC construction
temperature rise to class B
aluminium design up to frame size 160
cast iron design from 180 frame size
up to 1.1 kW 2 and 4 poles, standard rating comply with efficiency class EFF2 according to CEMEP Voluntary Agreement
efficiency class EFF1 as standard from 180 frame
progressive motors on request
63 bearings from 160 frame
regreasing facility as standard from 200 frame
OPTIONS:
cURus certification
CSA certification
from frame size 90 operate on static frequency converters
encoder
forced ventilation
mechanical and electrical design on specific demand
|
|
|
We invite you to see motive catalogue to understand the peculiarities of this product. Few words are not enough to illustrate its advantages.
|
|
Construction
Mechanical protection: IP55
Insulation: Class F
Temperature rise: 80 K
Frames: are in cast iron, (except frames 180 - 225 which are in steel)
Terminal boxes: are in cast iron
Endshields/flanges: are in cast iron
Fans:
- Up to frame size 315 are in polypropylene, (except frames 180 - 225 which are in steel)
- On frames 355 and above, are in polypropylene or aluminium alloy.
Fan cover: in cast iron or pressed steel, capable to withstand impact of 7 Joule.
Finish: Industrial paint system, standard color RAL 5010.
Motor series BFGC (IIC): kW RPM
0.37 up to 450 kW 3000 RPM
0.25 up to 500 kW 1500 RPM
0.18 up to 450 kW 1000 RPM
0.12 up to 400 kW 750 RPM
Motor series BFG (IIB): kW RPM
250 up to 710 kW 3000 RPM
250 up to 900 kW 1500 RPM
200 up to 710 kW 1000 RPM
160 up to 630 kW 750 RPM
|
|
|
The standard motors in the designs B3, B5, B14 can be used with frequency inverters, also available as motors with integrated inverters.
|
|
We provide a wide range of IEC Norm-Motors in EFF1 and EFF2. All motors are available in several designs. The power range starts at 0.09KW and stops at 7.5 KW in a aluminium case.
Our motors are for applications like pumps, compressor, ventilation systems, machines, conveyor systems and many other applications.
The technical construction of all motors is based on IEC and VDE.
All motors were constructed for Frequency Converter operation. The retrofitting of a seperately driven fan and of a break is possible at any time.
All motors are in protection class IP 55, ISO-class F and contains three PTC-thermistor. The motors are available wit B3 feet, B5 flange or B14 flange.
|
|
GE Motors Value Line vertical hollow shaft (VHS) WPI product line is a high thrust design intended for deep-well pump applications. The Value Line product offering ranges from 5 - 300 horsepower and is compatible with a variable speed drive.
Mechanical
- Motor type: Three phase induction
- Cast Iron frame and endshield
- Guide bearings on frames 213-449 are supplied with grease lubricated ball bearings
- Rotor: cast aluminum
- Ground terminal inside conduit box
- Enclosure: WPI with improved rodent protection
Electrical
- Voltage 230/460 and 460+/- 10%
- HP range: 5 through 300
- Insulation system designed to meet MG1-31 at 460 volts for IGBT drive compatibility
- RPM 3600, 1800, 1200 at 60Hz
|
|
|
With the X-Class, Force Control transforms oil-shear technology into affordable, off-the-shelf designs. Four standard models-XB1, XB2, XB3, and XB4, covers the most popular size range for brakes. Convenient double C-face or motor brake mounting and Clamped-Split-Quill allows drop-in, bolt-up installation.
|
|
Design with single-disk, spring brake
Main applications machine tools, timber processing, drive technology, transmission, process technology
Special applications winches, jetways, elevators, stage equipment, printing machines, packaging machines
Performance range 0,06 - 37 kW
Size 56 - 200
|
|
LSMV - AC Motors
3-phase TEFV induction motors or varialbe speed drive systems 0.75 to 132kW
LSMV:A flexible design concept with a complete range of motors and options from which to build solutions to exactly match your application requirements:
Speed accuracy, safety of rotation:
- Incremental encoder
Position control:
- Absolute encoder
Positive safety:
- Brake
Operation outside guaranteed speed range:
- Forced ventilation
External finish:
- Standard, customised
|
|
|
Iskra AC motors are four-pole induction motors with Al squirrel cage rotor and three phase winding on the stator. With their robust construction and superior output performance they represent the best traction and pump motor solution on forklifts and other electric vehicles. The best drive performances and system efficiency can be achieved in combination with Iskra AC controllers.
|
|
Induction motors are widely used for automation.
Their simple construction and long life have earned them a place in a extensive variety of applications to power or drive industrial and business machines.
There are broad range of models available for use with or without gear reducers.
These motors are rated for continuous duty and are reversible.
|
|
Type
4IK40A-BW2J
Series
Induction motors (High Speed Type)
Technical data
Type
4IK40A-BW2J
Frame size [mm]
80
Output power [W]
40
Shaft type
round
Rated speed for 50 Hz/60Hz [r/min]
2400/2900
Max. permissible torque for 50 Hz/60 Hz [Nm]
0.16/0.135
Power supply
single-phase 100 VAC
RoHS-compliant
yes
|
|
BM series are asynchronous, three phase, self-braking. BM series power range is from 0.06 kW up to 11 kW. The motor brakes in case of power supply failure. The brake supply is DC as standard with the rectifier built in the terminal box. On request is possible to have a separate brake supply. The rectifier is supplied with an over-voltage and radio frequency emission protection.
BM series is projected to withstand high overheating guaranteeing high reliability, also under severe operating conditions.
BM series is suitable to be controlled by inverters. The winding insulation class is F. Class H available on request.
Motor enclosure is TEFC, IP54 protection degree (IP55/IP56 available on request). An hexagonal hole is present on the shaft end to allow manual rotation (up to 132 frame size). All the BM series motors can be provided with the brake hand release.
Shields and flanges are aluminium made for motors up to 90 frame size, and cast iron for motor frame size from 100 up to 132. On request 132 frame size motors can be supplied with cast iron frame.
BM series main features are a robust construction, an extremely silent running and braking, the gradual braking action and motor starting, and a notable compactness in dimensions. All MGM motors are CSA approved.
|
|
BA series motors are asynchronous, three phase, self-braking. BA series power range is from 0.25 kW up to 45 kW. The motor brakes in case of power supply failure.
The brake supply is AC as standard. On request is available a DC brake (the rectifier is enclosed in the conduit box) and or a separate brake supply.
BA series is projected to withstand high overheating guaranteeing high reliability, also under severe operating conditions.
BA series is suitable to be controlled by inverters. The winding insulation class is F. Class H available on request.
Motor enclosure is TEFC, IP54 protection degree (IP55/IP56 available on request). An hexagonal hole is present on the shaft end to allow manual rotation (up to 132 frame size). All the BA series motors are provided with the brake hand release.
Shields and flanges are aluminium made for motors up to 90 frame size, and cast iron for motor frame size from 100 up to 132 mm. On request 132 frame size motors can be supplied with cast iron frame.
Frame, shields and flanges are cast iron made from 160 up to 225 frame size.
BA series main features are the robust construction, a very short braking time, an high and constant braking torque, frequent and heavy braking cycles, rare and easy maintenance. All MGM motors are CSA approve
|
|
|
SEW-Eurodrive's squirrel-cage motors and brakemotors deliver exceptional performance and reliability combined with low maintenance. Designed for continuous duty under tough service conditions, these low-noise brakemotors are used wherever fast, safe braking is a major application requirement.
|
|
Series: K2.. 90 to 355
Output range: 0.25 kW to 500 kW
Class: 3,000; 1,500; 1,000; 750 rpm, lower speeds and pole-changeable versions on request
Features: Energy-efficient and environment-friendly, suitable for frequency converter supply, designed to DIN EN 60034 (IEC 72) and pr EN 12101-3, mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey-cast iron design, versions for jet fans without shaft-mounted fan or pad-mounted, robust low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, class F insulation with thermal reserve, class H and higher possible, various modifications available
|
|
APPLICATIONS:
Pumps, fans, blowers or other inverter powered applications.
FEATURES:
Inverter Grade® Insulation System (Meets NEMA MG-1 Part 31)
Class F Thermostats (One Per Phase)
Rolled Steel Frame (140-320), Cast Iron Frame (360-440)
Aluminum End Shields 140-250, Cast Iron End Shields 280-440
40C Ambient, NEMA Design B Performance (4)
Constant Horsepower To 90 Hz
3 Year Warranty On Inverter Power
Special Balance
Regreasable Bearings 180 Frame & Up
Double Shielded Bearings 140-400, Open On 440 Frame
Double Dip & Bake With Extra Bracing
Premium Efficient Design, F1 Assembly Position
Class F Insulation
Conversion Kits: Canopy Kits (140-320 Frame)
Lifting Provisions (210 Frame & Up)
1.15 S.F. On Sine Wave / 1.0 S.F. On PWM
|
|
Series W21R 56 up to 315 efficiency determination to DIN EN 60034, WE1R 80 up to 315 efficiencies to DIN EN 60034 or C390-93, efficiency determination to IEEE112
Output range 0.06 kW to 335 kW
Speeds 3,000; 1,500; 1,000; 750 rpm
Features Energy-efficient and environment-friendly, designed to DIN EN 60034 (IEC 72), mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, class F insulation with thermal reserve, class H available as an option, terminal box optionally top-mounted, RHS or LHS up to frame size 315, various modifications possible
|
|
|
