|
|
|
The FOUNDRY-MASTER COMPACT is a modern spark emission spectrometer designed for process control and routine analysis of metals and alloys. Based on the tested and approved components of the FOUNDRY-MASTER UV, the "compact" is a less complex system. The FOUNDRY-MASTER COMPACT is specially designed for non-ferrous applications and convinces by its excellent price-performance ratio.
|
|
|
With the new sample excitation system SPECTRO Plasma Generator, CCDs selected especially for emission spectrometry, a high-performance read-out system, a novel spark stand, innovative optical systems, and the unique ICAL logic system, the SPECTROMAXx provides analytical capabilities previously achieved only with conventional photomultiplier systems. The novel spark stand of the SPECTROMAXx is distinguished by minimal maintenance requirements and argon consumption that has been reduced by nearly half.
|
|
PolySpek Spectrometers are low cost, high performance desktop type spectrometers that utilize the latest in CCD detector technology.
The PolySpek utilizes a unique optical system with multiple CCD spectrometers. The result is a flexible system that can be easily expanded to meet your growing needs.
If you have limited space, the PolySpek is only 19" square and weighs only 70 lb! It can be easily shipped by UPS or Fedex without damage.
|
|
|
The SPECTRO iSORT performs a 'fingerprinting' procedure to independently recognize the sample material. The optimal instrument settings for the material are then automatically used for the analysis without manual operator intervention.
|
|
The Metalscan "A" series portable spectrometers utilize a miniature CCD based optical system that allows for a small, compact unit that can be transported to the material site. "A" series can be used for a wide variety of purposes including sorting and on-site analysis/certification.
The ASSORT utilizes arc excitation, which allows quick grade identification (PMI). The ASCERT utilizes arc and spark excitation and provides laboratory-like analysis as well as quick PMI.
|
|
|
The FuelPro Biofuel Metals Analyzer is specifically designed for the analysis of Biofuel. FuelPro is fully compliant with both ASTM D6751 and EN14214 for metals analysis. The system is pre-programmed with all methods and procedures to ensure a smooth start-up. All reagents and training required to get you up and running with FuelPro are included. FuelPro is provided with all operator instructions on both a video i-Pod and laminated easy to understand cards.
|
|
|
|
|
|
Analyze Up To 2 Samples A Minute
Today, there are numerous requirements for the analysis of oil based materials. Some of the more frequently employed include: the measurement of wear metals in lubricating oils, the measurement of additive packages in lubricating oils and the measurement of the elemental content of edible oils. Although the specific requirements of each of these analysis are quite different, the analytical approach used is very similar.
Typically, laboratories interested in measuring the elemental constituents of edible oils have fairly conservative sample analysis requirements; perhaps only 10 to 100 samples per day. Most of these labs chose the Profile Plus Oil Analyzer for this application.
Laboratories for which the primary application is the analysis of wear metals often have extreme sample throughput demands; often in excess of 1,000 samples per day. High throughput wear metals labs typically chose one of our simultaneous oil analyzers, such as the Profile HT or Prodigy HT for this task. A system like the Profile HT is capable of analyzing in excess of 2 samples per minute.
|
|
The TEST-MASTER PRO is a robust, mobile spectrometer for precise analysis of metallic samples.
This decisive newly developed product is optimised for sorting demands common in depot/storage facilities of steel producing and metalworking plants. In arc-mode, measuring times of less than 2 seconds are possible allowing a complete analysis of large batches in a short time.
A high frequency power source operating in argon allows the exact analysis of nearly all metals (including cast iron) on the one hand and on the other hand, rapid sorting (including carbon determination) is completed within 4 seconds. To cool the instrument heat is transferred, without any air flow, using a heat exchanger, to dissipate heat produced during normal operation. This WAS innovation, ensures that the TEST-MASTER PRO stays operative in the most challenging of environments. (i.e. automated testing systems).
|
|
PMI-MASTER PRO is a robust portable spectrometer designed to quickly establish the composition of metals. The alloy measurement is initiated by an "easy to hold" pistol and does not require extensive training to use. The alloy grade or chemical composition appears in seconds on the integrated flat screen and can be printed with an external printer.
The Data is easily entered and the instrument controlled via a "touch screen" panel using standard windows based software package.
|
|
|
The readout system, special optic and ICAL logic system form the basis for the superior efficiency and flexibility of the new SPECTROTEST. They simultaneously minimize operating expenses and make operation of the instrument incomparably simple and safe.
|
|
|
With the new SPECTROLAB, SPECTRO introduces a new class of metal analyzers distinguished by improved analytical performance, greater investigative flexibility and simpler operation. Depending on the individual requirements, the analytical scope can be custom designed based on the ten standard matrices, Fe, Al, Cu, Ni, Co, Mg, Ti, Sn, Pb and Zn, or, as an alternative, from the five precious metal matrices, Au, Ag, Pt, Pd and Ru.
|
|
The V-950 is a laboratory-type spectrometer that utilizes a photomultiplier tube (PMT) based optical cell for the ultimate in analytical performance.
The system is equipped with a separate detector for each element of interest, and sensitivity of each channel can be adjusted to provide the best possible analytical results.
If you need to analyze cast iron, steel, nickel, copper, aluminum, zinc, magnesium, cobalt or titanium alloys - one sample a day or three hundred a day - the V-950 can certify the chemistry of your metals for you.
|
|
The FOUNDRY-MASTER UV is a compact emission spectrometer for process-control and the chemical analysis of metals. The original universal-concept used in the FOUNDRY-MASTER UV allows a previously unknown analytical flexibility.
The compact bench-top instrument, can determined nearly all elements in all metals. Steel and cast iron can be as precisely and quickly analysed as i.e. Al, Cu, Ni, Ti, Co, Pb, Sn, Zn, Mg. etc. The compact design does not require laboratory type conditions. This allows operation close to the production line. By using a standard Windows based GUI (Graphic user Interface); the instrument can be safely and effectively operated without the need of intensive training.
Saving, printing or exporting Data are standard functions. Thanks to the reliable vacuum-system and the intelligent standby-function; the FOUNDRY-MASTER UVis always ready for action.
|
|
|
The SPECTRO GENESIS is the first and only ICP-OES spectrometer available with a complete set of factory calibrated methods for environmental and industrial applications - truly "plug & analyze" without needing to first develop a method. The methods are delivered ready for use straight out of the box with an application package that includes the sample introduction system, sample preparation instructions and method documentation.
|
|
The new FOUNDRY-MASTER PRO is the first class laboratory optical emission spectrometer for complete metal analysis.
Engineered for high performance and reliability, the new FOUNDRY-MASTER PRO, with it’s innovative optical system and extended wavelength range assures precise identification and trace analysis of important elements, such as: N in steel and P in aluminium.
Proprietary detector and read-out technology, developed specifically for spectroscopy applications, out perform conventional photo tube based systems, positioning FOUNDRY-MASTER PRO as the system of choice for metal manufacturers, processors and the foundry industry.
- Wavelength range 130 nm – 800 nm covering all elements
- Precise analysis including grade determination
- Uncompromising analysis
- High long term stability and lowest limits of detection
|
|
Thermo Scientific ARL 3460 Advantage – OES metal analyzer
The ARL 3460 Advantage has been specifically configured to address the analytical requirements of foundries and metals processing companies. It is the next generation of the renowned ARL 3460 and combines cost effectiveness, high quality, performance and reliability, well proven technology and superior overall performance of PMT detectors.
As for all Thermo Scientific OES spectrometers, true calibration of the ARL 3460 Advantage is performed in the factory, ensuring excellent accuracy. It provides an immediate cost-effective and high-performance «turn-key» solution, ready to analyze cast iron, steel or aluminum samples on the installation day.
More information at www.thermo.com/oes
|
|
|
|
|
|
Q4 TASMAN - Advanced CCD Based Optical Emission Spectrometer for Metal Analysis
Q4 TASMAN - New CCD based metals analyser Q4 TASMAN is an advanced CCD based optical emission spectrometer for the metal analysis.
The new Q4 TASMAN provides the answers you need fast, using the very latest, state-of-the-art technologies. Our engineers have designed innovative solutions which make the
the Q4 TASMAN OES system fully suitable not only for your dedicated applications, but also for many general purpose applications. The result is a completely new CCD based instrument, which lets you achieve your goals faster, more reliably, and more cost-effectively than ever before with this class of instrument.
Q4 TASMAN offers dedicated solutions for your analytical tasks. The Analytical Solution Packages (ASP) are available per matrix: Elements, calibration, alloys, and more. In no time at all, you receive reliable, complete analytical results.
Q4 TASMAN´s superior analytical performance and economical run is a great asset for your metal business.
|
|
|
|
|
|
The Vehicle Bus Analyzer Speaks Your Language
The Vehicle Bus Analyzer is the first conventional oscilloscope to decode CAN serial data into Symbolic (application layer) text. Now, for the first time, an engineer has both the full range of CAN protocol stack information-symbolic, hex, and electrical signal-and the ability to view additional in-circuit electrical signals (sensors and actuators, voltage levels, transients, etc.) that influence the CAN bus. In addition, up to four different CAN buses can be decoded at one time. Standard and specialized oscilloscope tools can be used to validate and debug designs.
Eliminate the Barriers to Fast Debug
Direct symbolic decoding and triggering allows fast and intuitive understanding of events. Simply load your existing DBC database file into the oscilloscope (no re-entry of data is required); capture CAN message traffic; and all electrical (signal), protocol (hex), and symbolic (application) layer information is quickly displayed on the oscilloscope screen. Use standard oscilloscope and specializedVehicle Bus Analyzer tools to find rare events, automatically measure and statistically analyze event timing, and graph/plot information, including extracted CAN message data.
Unique Measurement Tools
The VBA can make many measurements not possible with other instruments. Aside from timing measurements, the VBA can also extract CAN data from a CAN message stream, graphically plot that data on the oscilloscope display, and compare it to other electrical signals. Here, information on the steering angle and steering angle rate of change is extracted from the CAN message acquisition, rescaled to decimal values, and plotted as a time-correlated "Track" on the VBA display.
|
|
|
Agilent network analyzers accurately characterize components by measuring their effect on the amplitude and phase of swept-frequency and swept-power test signals.
|
|
|
|
|
|
NetSpector enables protocol analysis in switched networks from one central point. The network sniffer is modularly designed: Display unit and recording agent are separate and can be used at different locations.
The display unit is the user interface with which data recording is controlled and the recorded data are indicated. The recording agent is responsible for the actual recording (capturing). It is either installed on the same station on which the display unit was installed or – and this is the special feature – on a remote station.
The recording agent records network communication on the remote station and, when necessary, sends it to the indication station. The display unit can be run on the local workstation while the recording takes place remotely on a switch.
Real and local data flow can be recorded by targeted placement. The problematic effects of active components connected in between (routers, switches, bridges) are thus avoided.
NetSpector captures all frames from the start up. Each station participating in network communication is registered and added to a station list. From the station list you select the station to investigate and you create the frame list of the selected station. The colour labelling of the frames makes it easier for you to find individual frames. The frame you see fully decoded and in detail in the frame detail window. In addition it is also possible to display the frame content as hexadecimal and ASCII in the frame hex window.
|
|
|
|
|
|
JDSU's proven family of Bus Doctor RX analyzers empowers computing, storage, silicon, and design engineers to simplify and accelerate the design and troubleshooting of serial and parallel buses used in electronics and computing products. Bus Doctor is unmatched in its flexibility and advanced analysis capabilities, including the industry's large trace buffers – twice the size of computing solutions – at 18.4 GBs and capable of capturing 256 million events bi-directionally with 4 nanosecond capture resolution. Trace capabilities are further extended through hardware-assisted features such as powerful cross-sequence triggering, extensive filtering options, advanced search capabilities, protocol-aware capture including automatic bus configuration, the ability to segment trace buffers, and accurate capture of specific bus events even across protocol domains. With Bus Doctor, engineers can quickly identify, locate, analyze, and resolve even the most complex issues faster and more accurately while significantly accelerating time-to-market.
With its modular architecture, the Bus Doctor becomes a dedicated analyzer for different bus types simply by changing out protocol pods and TAPs. In this way, users can leverage the Bus Doctor platform to extend their test tool budget across 13 serial and parallel buses, including SCSI, P-ATA, USB, SATA, Memory Card (MC), and PCI Express. With an additional logic analyzer probe, the Bus Doctor is effectively 14 distinct analysis tools in one.
|
|
The Xgig® Analyzer offers a wide array of advanced analysis capabilities to enable users to achieve more robust product performance without sacrificing time-to-market. With its wide range of capabilities, including intelligent triggering, automated capture, and Xgig Expert analysis, troubleshooting time is reduced from hours to minutes.
Protocol Support:
* 1, 2, 4, 8 Gb/s Fibre Channel
* 1.0, 10 Gb/s Ethernet
* 10 Gb/s FCoE
* 1.5, 3.0, 6.0 Gb/s SAS/SATA
* 1, 2, 4, 8 Gb/s Fibre Channel
Function Support:
* Analyzer
* BERT
* Load Tester
* Jammer / Error Injector
* Target Emulation and Traffic Generation
* Compliance Test
|
|
The AP-4000 captures the wireless signals between a base-station and a mobile terminal and analyzes the protocols. With its excellent analysis capabilities, AP-4000 is the perfect partner for interoperability testing.
- 3GPP FDD Compliant
- Analysis of UP Link and DOWN Link
- Analysis of Protocol Layers 1.2 and 3
- Analysis of C-P-lane RRC/NAS decode
- Analysis of U-Plane IPv4 Header/H245 PCAP Format Export
- Automatic Trace Mode using RRC message feedback
- Cell Search function
- MS Selection
|
|
|
|
|
|
PCI Express® Protocol Analyzers and Exercisers
The extensive PCI Express test equipment family from LeCroy includes expert analysis systems designed to meet your PCI Express needs. The PETracer ML system supports lane widths up to x8, while our most advanced systems, the PETracer EML and Summit Gen2, support up to 16 lanes with trace memory of 8 GB. The new PETracer Summit Gen2 is the first analyzer to support PCI Express Spec 2.0 (Gen2) traffic at 5 Gb/s per lane.
SAS/SATA Protocol Analyzers and Exercisers
Analyzers and exercisers from LeCroy for Serial Attached SCSI (SAS) and Serial ATA (SATA) deliver the power, flexibility, and features you need. The SASTracer Analyzer and SASTrainer Exerciser support both SAS and SATA traffic at speeds up to 3 Gb/s, while the SATracer Analyzer and the SATrainer Exerciser offer lower-cost solutions dedicated to SATA.
USB Protocol Analyzers and Exercisers
LeCroy provides a comprehensive range of solutions for all USB data rates, including Hi-speed (480 Mb/s), Full-speed (12 Mb/s), and Low-speed (1.5 Mb/s). The development tools provide a variety of solutions from the high portability of the USBMobile HS Analyzer to the powerful, flexible, and upgradable USBTracer/Trainer Analyzer and Exerciser System.
Fibre Channel Protocol Analyzer System
The LeCroy FCTracer 4G Analyzer supports all Fibre Channel data rates up to 4 Gb/s. The FCTracer supports up to four channels (two full-duplex links), and allows cascading of multiple analyzers to provide a synchronized display of up to 16 links for testing of switches and similar multi-port devices. Interchangeable plug-in modules support easy expansion and upgrading of the system.
|
|
|
|
|
|
Exceptional Tools for Serial Data Analysis
The LeCroy SDA family of products, built on the world's fastest Real-time Oscilloscope architecture, delivers outstanding real-time measurement solutions for signals with data rates up to 10 Gb/s and combines the analysis capability of several different classes of equipment in one single-box solution.
The SDA 18000 serial data analyzer is a true breakthrough in signal analysis. It delivers the industry's highest bandwidth — 18 GHz — as well as a combined highest sampling rate of 60 GS/s and longest memory of up to 150 million points available in a real-time test instrument.
Serial Data Analyzer
Based on the industry's most advanced digital oscilloscope platform, the SDA 18000 is a 4-channel real-time analyzer that offers outstanding analysis capability, accurate jitter analysis, and pristine signal fidelity up to 10 Gb/s data rate. The SDA 9000 serial data analyzer delivers 9 GHz analog front end bandwidth with up to 40 GS/s and memory depths up to 100 Mpts/channel.
With Serial data - both optical and electrical - being a dominant form of data transmission, fast and accurate analysis becomes a top priority. LeCroy offers a complete set of measurement tools for serial data analysis by providing exceptional vertical market solutions at the physical layers and at the protocol level.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
