|
|
|
|
|
|
FRONT LOADING PRIORCLAVE LABORATORY AUTOCLAVES
A firm favourite in laboratories throughout the food, drink, dairy, health and pharmaceutical industries, these autoclaves and are particularly useful for autoclaving heavy or bulky items.
Models are available in 100, 150 and 200 litre capacities and for electrical or direct steam heating.
- 500mm Dia. Cylindrical Chamber
- 7 or 10.5kW electric or direct steam heating
- Fully settable up to 138oC–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Castor mounted for ease of positioning
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming
- Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
|
|
|
|
Q63 LARGE CAPACITY FRONT LOADING PRIORCLAVE LABORATORY AUTOCLAVE
Designed to give the advantages (more difficult to overload and lower costs) of Priorclave’s cylindrical section autoclaves but with a higher capacity the Q63 autoclave is ideal for autoclaving heavy or bulky items.
- 630mm Dia. Cylindrical Chamber
- 320 Litre Capacity
- 21kW kW electric or direct steam heating
- Fully settable up to 138oC–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Castor mounted for ease of positioning
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming
- Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
|
|
|
|
Designed For Your Application - Three configurations are available to suit your specific temperature and cycle time requirements. Operating Temperatures to 320° C equate to shortened cycle times which result in higher throughput, higher production rates and lower overall cost; allowing you to use a smaller oven for a given level of production. In addition, the internal air supply panels distribute heat very evenly, resulting in dense loading capabilities and a high capacity per square foot of floor space.
Cycle times can be as short as 1 1/2 hours when equipped with Ultra Performance Filters and 2 1/2 hours when equipped with High Performance Filters. A unique mounting system for the HEPA filters reduces particulate concentrations and stress from thermal expansion and contraction. Despatch guarantees ISO Class 5 condition for all oven configurations throughout the cycle.
Optional touchscreen controls with an Allen Bradley PLC are powerful, yet easy to use. The system collects data for process validation, monitors operations relative to control limits, and communicates with external data processing equipment.
Thorough IQ, OQ and SQ validation packages minimize the time and effort required for installation, start-up and validation (available as an option.)
|
|
|
|
|
|
COMPACT 60 PRIORCLAVE LABORATORY AUTOCLAVE
An ideal solution for the laboratory with occasional or low volume autoclaving requirements the Compact 60 allows flexible operation for the low volume user, usually only available in larger units.
- 60 litre capacity
- Floor standing with lockable castors
- More flexible than fixed cycle sterilisers for laboratory and mixed load use
- Fully settable up to 138°C – 2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory and optional Printer
- BioCote anti-microbial surface coating – unique to Priorclave
- 12 months parts and labour warranty (parts only outside the UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in sealed glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming facility
- Delayed Start facility
- Fan assisted cooling
- Timed Freesteaming
- Thermocouple port and separate test port
- Two stainless steel mesh baskets and a load support plate
- Stainless steel waste container available
- Operation from standard 13 Amp socket (UK)
- Full range of options and accessories
|
|
|
|
|
|
TOP LOADING PRIORCLAVE LABORATORY AUTOCLAVES
A firm favourite in laboratories throughout the food, drink, dairy, health and pharmaceutical industries, these autoclaves feature a 500mm vessel diameter enabling low loading heights for increased operator comfort. Models are available in 100 and 150 litre capacities and for electrical or direct steam heating.
- Compact for where space is at a premium
- 7 or 10.5kW or direct steam heating.
- Fully settable up to 138C–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5/10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming and Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Load support plate and 2/3 baskets
- Stainless steel waste container available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
Front Loading Autoclaves - Circular Section
Ideal for all Laboratory Applications
Available with various options and accessories, including Assisted Air Cooling, Load Sensed Process Timing, Advanced Water Cooling, Pulsar Free Steaming, Data Recording devices etc.
120 - 330 Litres - Front Loading
Fully Programmable Touch Screen Controller
PIN Restricted User Programming
Holdwarm / Delayed Start
Timed Free Steaming
Base Shelf
Full Range of Options & Accessories
Suitable for a wide range of Laboratory applications
Guaranteed precision and versatility in sterilization
Ultra Quick Swiftlock Door Mechanism
|
|
Available with various options and accessories, including Assisted Air Cooling, Load Sensed Process Timing, Data Recording devices etc.
There are two version of the Compact autoclaves:
Classic Version
Ideal for all Laboratory Applications, especially Liquid Loads, Media etc.
This is the ideal model for all standard traditional laboratory sterilization procedures. Water fill is manual; during the cycle condensate leaves the vessel via a silicone tube that is connected to a heat resistant bottle. Ideal for use with media or liquid loads.
AutoFill Version
Ideal for all Laboratory Applications - AutoFill is fitted as standard
A pulsed-heat drying system, which is adjustable in 5 minute steps, is available when running a non-fluid cycle. The integral reservoir, once filled, provides sufficient water for up to 20 cycles; moreover, the same container also acts as a collection vessel for both condensate and water which is returned from the autoclave chamber at the end of the cycle.
|
|
HMC HV 25 / 50 / 85 / 110
Sterilizing simply and well.
- Simple, full automatic programmes
- Liquid programs
- Steam pot program, prepares agar and keeps it ready for processing
- Microbiological and process engineering security with dual sensor technology, pressure and temperature controlled
- Maximum mechanical security by acceptance from the TÜV Bayern e.V.
- Compact external dimensions
- Steam condenser
- Full range of practical accessories
- Easy cleaning and waste water disposal
- Validation plug
- Easy to read LCD progress display
- Quick-locking mechanism with one finger operation
- Protective cover for quick-locking mechanism and other temperature areas
- Powder-coated lining, equipment always clean-looking, no finger-print, surface feels cool
- 80 years production by established export business
|
|
| ... products without technical information |
| |
HSM Vertical Baling Presses
Compact, space-saving and reliable
> Application areas: retailers, wholesalers, manufacturers, central storages, industry, distribution centres, logistics
> Suitable for the following material: cardboard, paper, foils; further materials upon request (e.g. polystyrene, cans, PET/UBC, stiff plastics, etc.)
> Pressing power from 33 kN to 540 kN
> Bale weight from 25 kg to 550 kg
> Bale strapping: manual, with polyester tape or wire cut to length
HSM baling presses reduce the volume of your waste piles by up to 95%! That means you save valuable space that the bulky packaging materials take up on-site. And you generate a secondary raw material of sorted bales, which can be incorporated back into the recycling system.
|
|
Air-Operated Baler for cardboard, paper, plastic and big bags:
• No oil
• No electrical parts
• Safe & easy to use
• Easy to clean
• Fits anywhere
The baler model 205 and 205TS are powerfull balers with very small footprints
|
|
Small and medium-sized front-loaded balers
ORWAK 3105, 3110, 3210, and 3300: These front-loaded balers require a minimum of floor space and produce bales in the range 40 to 250 kg. High density bales mean lower transport costs!
NEW! ORWAK 3105 and 3110 are the smallest front loaded balers in Orwak's assortment and they are perfect for companies with small amounts of packaging material. The low height in combination with the small footprint make Orwak 3105 and 3110 fit where you need them! Capacity 3105: up to 40 kg cardboard/50 kg plastic
Capacity 3110: up to 60 kg cardboard/70 kg plastic
ORWAK 3210 is a small and efficient front-loaded baler with a cycle time of only 13 seconds. Capacity: up to 80 kg cardboard/100 kg plastic
ORWAK 3300 is a medium-sized baler with a built-in digital display. The height is only 1980 mm for convenient installation where the ceiling is low. Capacity: up to 200 kg cardboard/250 kg plastic
|
|
Top-loaded bin compactors
ORWAK offers a range of bin compactors suitable for compaction into standard two- to four-wheeled plastic/steel bins in the capacity 240-1100 litres.
ORWAK 4100 is constructed for four-wheeled bins and ORWAK 5070 is a flexible combination of a multiple-chamber baler and a bin compactor.
ORWAK’s LE TL and LE FL are based on an ingenious modular system and made from maintenance-free aluminium. Waste can be compacted into standard two-wheeled bins or into plastic bags.
|
|
Ram Guides prevent platen from cocking when the chamber is unevenly loaded
Electrical Cabinet includes emergency stop button for easy and safe operation
Operational Handle for easy control of the platen upwards and downwards
Material Feeding Door for big-volume materials loading
Boltfor safe and easy access to the compressing chamber
Four-sided Door for easy tying and baling
CE Certified guarantees trouble-free operation
|
|
Two Hydraulic Cylinders for automatically lifting the chamber door
Ram Guides prevent platen from cocking when the chamber is unevenly loaded
Wide Mouth Feeding Door for big-volume materials loading
Electrical Cabinet includes emergency stop button for easy and safe operation
Lifting Chamber Door promotes work efficiency safely and cuts labor costs
Heavy Duty Platen incorporates special wire-tie guides for quick bale tying with wires or PET belts
CE Certified guarantees trouble-free operation
|
|
The number one solution for compacting your EPS (Expandable Polystyrene) minimum 20:1 measured on weight.
Mil-tek EPS Model 900:
• Capacity: 15 kg. per hour
Mil-tek EPS Model 1800:
• Capacity: 80 kg. per hour
|
|
Features:
You can open the two side doors at the same time
Two side doors can be opened at the same time
Designed to compact packaged products such as fertilizer, dyestuff, etc. directly into smaller and unifying sizes
Convenient for loading and saving your transportation cost.
Special customized pallet size according to your requirements
Quick and easy loading process.
|
|
Baling press is to presses suitably by lighter and moderately severe sticking packing, plastics, Tekstilien etc.
Baling press type LU 2.5 - 7050
Bundle weight 40 - 60 kg of charging hole 700x460 mm
Baling press type HY 5.0 - 7050
Bundle weight 50 - 70 kg of charging hole 700x460 mm
Baling press type HY 8.0 - 10060 fiber plastics
Bundle weight 100 -150 kg of charging hole 1000x550 mm
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
