|
|
Ideal for small to medium size applications due to a variety of station designs; material delivery to automatic saw(s)
-Heights from 3 to 8 m
-Up to 24 picks/hour
-Loads up to 1,2 tons/cassette
-Utilization of customer’s own cassettes (option)
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
We can supply machines with milling dimensions up to:
- daylight between columns: 8 mt.
- "X" axis: 48 mt.
- vertical daylight: 2,5 mt.
The ROVERA G.M. milling-boring machines have some important features, such as:
- All the movements are realized using pre-charged linear guides in such a way to guarantee a degree of precision higher than all other hydrostatic machines and above all to assure a constant accuracy under every circumstances. The linear guides grant a very high level of precision and can reach 2 microns/meter.
- The "PMF" machines are foreseen with a master fixed column and a transversal "slave" column positioned on roller skids. In such a way the portal frame perfectly fits to the thermal expansions without compromising the precision of the machine.
- On each machine it is possible to install the automatic head-changing device.
Our models can be conceived for different purposes: from high removal solutions (torque up to 2.000 Nm) to applications with 5 axis electrospindles for machining of aeronautics items and/or moulds.
- Several accessories can be supplied, such as rotating tables for turning operations, with a diameter up to 4 meters and capacity up to 60 tons.
|
|
We can supply machines with milling dimensions up to:
- daylight between columns: 8 mt.
- "X" axis: 48 mt.
- vertical daylight: 2,5 mt.
The ROVERA G.M. milling-boring machines have some important features, such as:
- All the movements are realized using pre-charged linear guides in such a way to guarantee a degree of precision higher than all other hydrostatic machines and above all to assure a constant accuracy under every circumstances. The linear guides grant a very high level of precision and can reach 2 microns/meter.
- The "PMF" machines are foreseen with a master fixed column and a transversal "slave" column positioned on roller skids. In such a way the portal frame perfectly fits to the thermal expansions without compromising the precision of the machine.
- On each machine it is possible to install the automatic head-changing device.
Our models can be conceived for different purposes: from high removal solutions (torque up to 2.000 Nm) to applications with 5 axis electrospindles for machining of aeronautics items and/or moulds.
- Several accessories can be supplied, such as rotating tables for turning operations, with a diameter up to 4 meters and capacity up to 60 tons.
|
|
|
A gantry robot handles all functions, such as work transfer, mount, loading, unloading, and work stacking. The auxiliary loader recognized automatic processes for both sides of the workpieces.
|
|
|
Everything you need for car washing, from an entry-level model to an innovative brushless plant. Be it a gantry wash or an easily installed suspended model, you can always rely on Kärcher automatic vehicle washing plants – clean and economical. The Kärcher CB series offers an interesting range of gantry car washes for car dealerships, filling stations, washing centres, hotels and supermarkets. There are three different versions, from the entry-level CB 1 to the exclusive CB 3, which are based on the same platform. All three versions feature a simple and robust construction and are attractively styled with washable plastic panelling in a colour scheme that doesn’t show the dirt and maintains its good looks at all times. Our intelligent software concept guarantees a rapid setup and reliable control of the plant – The best prerequisites for a minimum of maintenance and running costs. Features such as the use of flow-optimized drying fan motor ensure perfect results and highly satisfied customers.
|
|
Stockyard Systems
Coaling installation
Germany
1x portal scraper KP1000.56
track 56.2 m
height of pile 21 m
hard coal 1000 t/h
|
|
|
SENCITY®LINK operates at a frequency of 60 Ghz with a net data rate of 100 Mbps full duplex over a distance of up to 800 m (2600 ft). Measuring only 16x16 cm (6.3"x 6.3"), its compact size is due to deep integration of its active and passive components. The SENCITY® Link system is unique in its small unobtrusive size and ease of installation which is facilitated by the simplicity of an optical pointing and alignment bracket. Extensive trials and customer installations have proven that this HUBER+SUHNER solution mitigates expensive civil works and minimizes visual impact.
|
|
Flexible Integrated Applications and Services
The Process Automation Suite offers many "under the bonnet" features like date and time stamped events, Telemetry, Auto I/O Scanning which are all standard offerings.
When combined together within a Control System the flexibility of the system becomes apparent, allowing the independent delivery of functionally different services all on a single system.
|
|
hese products alllow you access to the serial peripherals from the Windows, UNIX & LINUX stations connected to the Ethernet TCP/IP with no need to modify existing software using standard COM ports.
You may thus link together serial peripherals that are distant from one another without the need to install any specific cabling and while using the network infrastructure already existing in your premises, share serial links or build bridges between the Ethernet Network and serial links, etc …
These products also enables to integrate within the same network both MODBUS serial (ASCII & RTU) based equipments and equipments using the MODBUS/TCP Protocol. They are installed as a bridge between the Ethernet network and your existing MODBUS equipment, thus it simplifies dramatically the extension of a standard application to MODBUS/TCP over the Ethernet network.
COMETH range combines the flexibility and power of the TCP/IP Protocol, as well as the universality of the Ethernet networks.
|
|
Wirelessly connect PLC's on a new machine to an existing factory automation LAN
Interface different automation LAN's in different sections of a plant
Connect different protocol devices into a common wireless network
Use ELPRO Wireless I/O units as remote I/O for PLC's
Features
Wireless extension of factory automation buses such as Profibus and Ethernet, providing a high security firewall
Interconnect different data buses - Wireless protocol conversion
Interface between PLC's, DCS, HMI or SCADA and ELPRO wireless I/O units
High security data encryption
Automatic acknowledgment and error-correction,
Peer to peer addressing, and Multiple path routing
|
|
The 9160 G2 is our newest and most advanced Wireless Gateway. This long range wireless access point enables you to mix and match RF technologies to best suit your requirements. The 9160 G2 offers support for dual 802.11 radios for a range of wireless applications. The 9160 G2 delivers robust security, with the ability to scale from basic WEP all the way up to 802.11i with AES encryption.
Industrial housing for demanding environments
Dual radio, 2.4 and 5 Ghz multi-band access point supporting 802.11 a/b/g/ radio standards
Enhanced real-time diagnostics and configurations via SNMP, HTTP, Telnet or serial console
Scaleable security
|
|
| ... products without technical information |
| |
Cantilevered concept bridge saw with 5 axes.
SX5
Travel, X: 3500 mm
Travel, Y: 2000 mm
Travel, Z: 400 mm
Travel, C - saw spindle rotation: 360 º
Travel, A - saw spindle tilt: 0 - 90 º
Spindle power: 15/20 hp
Size of work surface: 3800x2000 mm
Height of work surface: 700 mm
Weight: 4500 kg
|
|
Easycut FE 800
Simple, precise and sturdy bridge saw, ideal for the most frequent processing. Equipped with e SOOmm circular blade, manually inclinable in any position from 0! to 90", with possibility of step-cutting, even inclined.
User interface with keyboard on a mobile arm and lined display for control, command and programming.
|
|
New center of cutting up and shaping
The new TC750 is ideal as well for the funerary one, decoration as the building. With numerical control, it has five axes and is intended for the operations of traditional cut, shaping, formatted 3D and massive milling. It is equipped with the new software You CAD/T' CAMWOOD 3D.
Rotation of the unit of sawing on 360° and slope of the head of 0° with 100°. TC 750 is equipped with a disc from 400 to 750 mms in diameter pulled by a spindle motor of 17,6 kw (24 cv).
Available in version gantry or semi-portal bridge crane, this center of tack welded cutting up has a length of cut useful of 3,5 m for 15 m on adaptable track and a height of useful cut of 250 mm maximum.
With or without table, this perhaps provided equipment, in option, of a store of tools and an automatic system of change.
Obstruction of the TC750 with table: 6,135 m of length, 6,025 m broad and 3,608 m in height.
|
|
Series of newest advanced models of Mikrosam's CNC machines for processing marble, granite and stones. This CNC machines has been designed to offer maximum flexibility and much opportunity for machining of marble, granite and stones. Traditional qualities combined with the most advanced technological innovations that were already implemented have made our machine ideal solution for marble, granite and stone industry.
High productivity machines, ideal for drilling, milling, 2D and 3D modelling, lettering, engraving, internal and external edging, bevelling, grooving, cutting with strait and convex disc.
|
|
FORMWORK FOR BRIDGES AND VIADUCTS
Panel formwork for sequential casting of piers. Self-climbing formwork for constant or tapered cross-section high-rise piers. Formwork designed to prefabricate frameworks or individual beams on-site. Formwork to cast beams and frameworks on site. Formworks designed to cast curbs and supporting structures.
|
|
Right of way for pedestrians - BTMAT
Compact model 2000
Advantages:
- Boarding PVC HR (colors town of Paris)
- Floor non-skid wood
|
|
The Modular System for Engineering Structures
PERI engineers have created ideal project and connecting method combinations from known tunnel, bridge and construction engineering load combinations, and developed this to form a versatile construction kit. This means load-optimized and geometrically-adapted supporting formwork can be built from a large selection of system components.
VARIOKIT, the engineering construction kit with rentable, standardized components, is the solution for numerous requirements in civil engineering:
- fast
- safe
- cost-effective
In the process, PERI provides technical information for each project e.g. operating instructions and assembly drawings. Static calculations and assembly support are also integral elements such as the constant support given to contractors and help provided with new tasks for current projects. For all construction projects, PERI can provide everything from one source.
|
|
|
A natural rubber disk that is completely enclosed in a steel pot allows tilting movements around any horizontal axis due to its capacity to deform.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
|
