|
|
AUTOMATIC WAREHOUSE FOR ML PLATE
The solution for the stocking of flat materials
Automatic warehouses for ML Plate, with a single or double tower, are the ideal system for the vertical stocking of sheets of any materials, panels and flat materials in general.
ML warehouses are a practical and economic solution, widely used either for the production or the trade of plates. They are often installed next to a machine that works the plate: laser cutting, oxygen lance cutting, shears, benders and so on.
BIMAG warehouses can be customised to meet any specific need, for the stocking and handling of your flat materials. You can run the warehouse by means of our specific software, even from many host positions on the network: loading/downloading, running of stocks and inventory are accessible in real time.
|
|
|
|
|
|
CUBE is an automatic distribution machine to store materials of small and average dimension. Minimum noise, reduced power consumption and modern design make its application good in point of sale and in warehouses servicing the public. It can be more than 42 ft long and can store 6458sq.ft. of material covering a surface of just 613 sq.ft. It can work by single pick bays, by superimposed bays, positioned on the machine front or back side. It is provided with a local console allowing the optimization of the picking activities and a visual display of the diagnostic system information. The interface with the company host is made easy. It's a perfect solution to automate the picking and restocking phases in shops, laboratories, and in all environments where the ceiling height available is limited.
CUBE M125
It differs by the loading capacity of the trays in order to satisfy different needs. The external sizes of the modules do not change L 115”x H 110”. The load/unloading bay is internal and offers the possibility to configure the position of the picking bays opposite or one over the other. The performance of the machine are: vertical speed 19”/sec – horizontal speed 19”/sec- nr. of handling operations (120 trays/3 modules) 120/h max.
CUBE XR250
It is different in dimension of trays, for a superior load of charge, 275 and 550 lbs to guarantee an high stocking volume. The modules external dimensions are:L 139”x W 108”xH 106”. The picking/deposit bay is internal and offers the possibility to configure the picking bays in an opposite or superimposed position. The machine performance are the following: Vertical speed 19”/sec. Horizontal speed: 19” /sec.with an access time <1m.
|
|
Typ:EUROMAT
Height of vertical carousel: 6430 mm
Width of vertical carousel: 3500 mm
Depth of vertical carousel: 1500 mm
Carriers: 24
Load per carrier: 0 daN
Carrier load height: 410 mm
Carrier load width: 2850 mm
Carrier load depth: 510 mm
Description: In these four carousels small parts are stored in bins/totes. The control system uses a PC.
|
|
- Optimum utilization of floor space. The term upward mobility takes on a new meaning with the Rotomat!
- The Rotomat is as flexible as you need it to be. Units can even stretch over several storeys!
- Goods to user is the motto, not user to goods. Personnel costs and cycle times can be reduced!
- High-performance control units and computer links ensure that the Rotomat can be put to use flexibly and on an individual basis!
- The required parts are brought to the ergonomic retrieval height at the touch of a button!
- Safety is of paramount importance. No climbing of ladders; no danger of accidents!
- The Rotomat protects all parts from dust, light and unauthorized access!
|
|
|
|
|
|
THE PART COMES TO YOU, RATHER THAN YOU CHASE THE PART. With a TITAN VERTICAL CARROUSEL, at the touch of a button (or better still, at the flash of a bar-code) the machine will move the appropriate shelf to the consulting bay and point to the appropriate bin or compartment with a light. This makes your operator more efficient (Access to parts in a matter of seconds) and makes your warehouse or stores neater and more streamlined.
SPACE IS SAVED: overhead areas not reachable unless by an impractical ladder or a cumbersome fork-lift are now put to work. Footprint per cubic meter of accessible storage is minimised. Typically 40 to 400% space is saved compared to conventional solutions.
PROTECTION & CONTROL OVER ACCESS: as self-contained system, a TITAN VERTICAL CARROUSEL allows you to lock away quickly a large quantity of parts, to restrict access to authorised persons only, and to put in an efficient fire protection system if needed. GYROCLASS can also be a critical access enabler for persons with restricted mobility.
SPECIAL APPLICATIONS: as self-contained system, it is quite possible to climate control (temperature, light, and hygrometry) a vertical carrousel.
TRACABILITY & INTEGRATION INTO LARGER MANAGEMENT SYSTEMS : TITAN VERTICAL CARROUSELs with attending software will help you get full control over parts tracking and dispensation, limit errors and disappearances, integrate data into larger ERPs or WMSs for greater efficiency and achieve reduction of costs of storage and of errors.
|
|
The Hänel Lean-Lift system with vertical lift technology.
The Lean-Lift uses available room heights, similar to high bay racking.
Unlike high bay racking, however, the Lean-Lift stores the parts without any loss of storage space, by means of height optimization. This results in maximum storage capacity on a minimum footprint.
An economic solution, convincing to all.
|
|
|
|
|
|
Where massive storage of components, parts, tools, or spares is needed,
the SILO is the solution.
A compact, high density storage solution, the SILO is based upon two parallel racking structures that can be up to 10 metres high. The racks of the SILO are loaded with trays or drawers, adapted to fit the desired contents (with general purpose or bespoke dividers, slots, bins boxes...). The SILO offers a capacity that is quite substantial, to be measured often in hundreds of cubic metres. By making full use of available height, this solution makes much more efficient use of floor areas than traditional shelving systems.
The SILO is a robotic filing solution : a carriage on board a crane runs down the central corridor and retrieves the requested drawer and brings it to a workstation (there may be several). Picking thus is made much more efficient, and the number of operators required to do a given number of picks (or loads) a day is substantially lessened.
The SILO is a computerised solution: hence errors, missing items, and other incidents are sharply curtailed, and traceability of transactions can be made integral. This improves quality and productivity of warehousing or order preparation services.
The SILO is a securitised, environment-controlled solution: as imposed by a specification to be agreed upon with the user, it is possible to include humidity and temperature control, and obviously also a system to make storage fireproof.
|
|
SILO is a vertical filing system with high intensity storage Thanks to a system of shifting trays, SILO offers increased exploitation of vertical space taking up limited surface areas. The operating SW on every machine allows the handling and control of filed materials with the greatest order and information, and all with operator safety and convenience of use in mind. Reliability, sturdiness and extreme dimensional modularity make SILO the best solution for problems associated with filing in very high locations.
Advantages
- Maximum exploitation of vertical space
- Future height and bay position adjustability
- Single/multiple bays, and on different levels
- Modular trays in heights, divisible and equipable
- Protection against dust and unauthorised entry
- PC and operating SW on every machine
|
|
The Kardex Shuttle® XPCrane offers all the same benefits as a miniload system but with 100% more flexibility, greater scope for future expansion and superior cubic utilisation of space.
Principle
The Kardex Shuttle XPcrane Vertical Lift Module (VLM) is an enclosed system of vertically arranged trays, an extraction platform and a series of computerized controls that allow operators to stay in one location while up to millions of items can be delivered automatically (Patent Pending).
This system is comprised of a series of vertical modules with one central crane delivering items to an ergonomically positioned workstation.
KARDEX Shuttle XPcrane VLM can consist of up to 12 single modules and have a storage capacity of 5.200 m² with footprint of only 74 m²
|
|
|
|
|
|
The Shuttle® XPmultiple consists of two independent modular high-bay systems arranged in tandem. Trays are transported from the rear system to the front system – and vice versa – by transfer unit. Items are then removed by the operator from the access window. Speed of delivery from request to actual delivery is extremely fast. Internal pre-order picking reduces the waiting time even further. The system can be controlled by Kardex PowerPick® software which allows items to be managed and controlled in preparation for storage and retrieval.
The Shuttle® XPmultiple is ideal where it is impossible to install two separate systems. Deep, awkward, narrow spaces can be used to their full capacity and routes reduced by having only one access opening. The space required for movement is cut by 50% when compared to individual systems and whilst an order is being picked at the access window, the system is preparing the next tray for delivery in the background.
The modular structure of the Shuttle® XPmultiple ensures almost infinite versatility whilst exploiting different room heights. Every Shuttle® XPmultiple can be used as a stand-alone unit and depending upon requirements can be expanded to form a composite system and extended where and when necessary
|
|
The Shuttle XP is a high density and dynamic vertical lift system. The Shuttle XP builds upon the tremendous success of the previous NT model. It is built to maximise on your ceiling height with units available up to 30 meters high. One unit can carry a gross load of 60 tonnes or more.
Combined with the Kardex software Powerpick 5000 you will be able to maximize the efficient use of your inventory giving details of availability, transactional history, and space utilisation to boost your productivity increase even further.
Benefits:
Increased Picking Speed
Saving Space (80% will be typical)
Saving Time
Health and Safety
Better Protection (include PIN access control)
Software & Controls
|
|
Vertical Lift Module (VLM)
The Stanley® Vidmar® Vertical Lift Module (VLM) Automated Storage and Retrieval System (AS/RS) is the ultimate high-density storage solution. Manage up to 132,000 lbs. of materials from one convenient computer console!
An entirely modular structure, the Stanley® Vidmar® Vertical Lift Module allows you to store, locate, and pick materials for limitless types of applications. A variety of VLM models offer your choice of performance, capacity, and configuration options; whatever you need to achieve, the Vertical Lift Module is your answer!
|
|
System of vertical store automatic, composed of a bearing structure on which the entry and the export of the goods are automated thanks to a shuttle or mechanism extractor and elevator.
Produced principle the "with man" is applied to this machine, which allows:
To optimize the courses
To reduce times
Operation is very simple; the operator selects on the screen produces it wished and, automatically, the shuttle moves vertically up to the level at which it is located, the plate extracts corresponding and carries it to the station of picking or counts of exit.
Advantages
Data-processing management of the store.
Saving in space: all the height of the room is used.
Time-savings: the operator does not need to move of his work station to prepare an order.
Safety of the goods.
|
|
|
|
|
|
The Shuttle® XPlus is a vertical lift system which builds upon the success of the Shuttle® XP technology; its intelligent design allows organisations to utilise awkward spaces for their storage, providing them with greater storage capacity.
The system technology allows up to four Shuttle® XP systems to be combined with a single extractor which can move vertically, horizontally and diagonally, minimising waiting times even further. The design of the Shuttle® XPlus makes it an ideal addition to the Shuttle® XP system, leading to the creation of an intelligent and quick retrieval system.
Kardex Shuttle® XPlus – Technical Features
Up to four Kardex Shuttle® XP units combined in one system.
Total width: dependent upon the number of units combined.
Height: from 3,050 to 20,050 mm.
Maximum payload: 60 tonnes per segment.
Tray spacing: 25 mm.
Vertical speed of extractor : up to 1.70 metres per second.
Horizontal extractor velocity: up to 1.00 metre per second.
Tooth belt safety margin: minimum 10 times.
|
|
Vertical carousels : Dynamic storage solution for Electrical components - EuroMat EM-75-500-660-27-650
frame_blacktrennstrich.gif
Vertical carousel for electrical components
|
|
- Tailored complete solution designed by Hänel's consulting engineers, which meets our high requirements exactly and can be expanded without difficulty!
- Operator-friendly solution with the use of terminals right at the lifts!
- Networking of the different storage systems by the powerful Hänel inventory management system!
- Convincing price-performance ratio!
|
|
The TOWER Storage Lift is Storage Racking with a robot-driven carriage.
Between two storage volumes in tray-carrying racking
A carriage travels, extracting the trays
Bringing them to a workstation,
By the order of the operator, relayed by computer.
Automated storage of this sort carries many advantages :
- Exploitation of high space often otherwise unused
- Accommodation to heavy or light items
- Adapts to bulky or minor items
- Trays can be removed from the storage space
- Storage machines can easily be adapted to new volumes
- Storage space is available where it is needed - at the point of usage
The TOWER Storage Lift fits into the universe of automated storage products from ELECTROCLASS between
- The Titan vertical carousel, plus best suited to smaller items and lower available heights
- And the Silo mini-load crane system, best suited to massive centralised storage of parts.
The TOWER Storage Lift the Four-wheel drive of Storage Automation
- Robust,
- Reliable
- Adaptable
|
|
| ... products without technical information |
| |
CribMaster Accu-Drawer
The Accu-Drawer is a great solution for managing kits at point-of-use, tracking the usage of durable items, tracking maintenance items to work order tasks and the monitoring of inventory in critical areas.
Automated tracking of inventory in and out of a secured modular cabinet
Visual inspection of missing items from the touch screen monitor
Easily locate the person and area the item was issued to and when it was issued
Manage kits with unlimited levels of kitting
Monitor calibration schedules and inspection processes
Audit databases for compliance purposes
and much more...
With the Accu-Drawer there is no inventory to scan or transactions to log. Transactions are automatically recorded when inventory is removed from the cabinet and when items are missing from the cabinet the touch screen displays %u201Citems out%u201D on the ATR screen, making FOD checks easy, fast and accurate. This is a great RFID tool tracking device...proven and reliable.
|
|
Bench Top & Cupboard Styles
Evaporation from drips and open containers contributes considerably to poor quality air within the laboratory. The Bigneat range of storage cabinets removes vapours, purifies the laboratory air and enhances the long-term health of laboratory personnel.
Main Features:
. Continually cleans up and purifies laboratory air.
. May be used when ducted extraction is unavailable.
. No outside exhaust necessary for vapours.
. Fully mobile, a simple electrical connection is all that is needed.
. Energy saving, cost effective & safe.
|
|
THE AIR OF THE LABORATORY IS PURIFIED
The air released by the filter contains 100 times less pollutants than the acceptable values defined by official authorities.
STANDARD EQUIPMENT :
•Electronic "fan failure" alarm for the continuous monitoring system of the ventilation.
•Sampling port for testing the saturation level of the filter.
VERY SILENT TURBINE FAN
Only 49 dBA
GOOD VISION OF THE STORAGE
Thanks to lockable transparent UV resistant door.
EASY TO SET-UP CLOSE TO THE USERS WORKSTATION
Does not require any ducting.
SPILL TRAY FILLED WITH AN ABSORBING MAT
To contain potential spill from broken containers.
|
|
|
|
|
|
AirClean Systems PCR Combination Workstation
AirClean®Systems PCR workstations with UVTect™ microprocessor control, allow you to maintain a Class 100 clean work area during PCR preparation. The AC600 Series LFUV Model has a built-in 254 nm ultraviolet light that allows the operator to irradiate tubes, flasks and pipettes between amplifications. The 254 nm ultraviolet light will effectively destroy potentially contaminating DNA and RNA within minutes. UVTect™ monitors the life of the bulb to ensure proper levels of irradiation.
The workstations feature a unique interlocking sash with a safety overlap to prevent gaps. The sash also has a safety switch that automatically turns off the ultraviolet light and activates the blower and fluorescent light when the sash is raised. This revolutionary uni-body design provides unmatched user protection from harmful ultraviolet rays during the sterilization process. HEPA filtered units have a built-in monitoring system to alert the user when to change the HEPA filter.
|
|
BIGNEAT's PCR UV workstation efficiently protects against contamination by bathing PCR aparatus in sterile air and limiting the risk of contamination from the operators arms, or from equipment bought into the otherwise sterile environment.
Powerful UV lamps are combined with optical reflectors to ensure uniform intensity distribution of the sterilising UV radiation.
1. Superb all round vision
2. Electronic filter saturation indicator
3. Quiet operation
SPECIAL BIGNEAT FEATURE: Fan speed increases when door is opened to maintain air velocity to 0.45 m/s at the front access aperture.
Available 800mm wide as PCR UV cabinet, or as a UV sterilisation cabinet (no HEPA filtration)
|
|
POWERFUL UV DECONTAMINATION
The UV lamp insures a full decontamination of the entire work surface, enclosure walls and PCR equipment.
AN ERGONOMY OF QUALITY
The ergonomy of the working apertures is unique. It enables the protection of the handling while allowing the operator to have access to the entire surface of the enclosure.
ENCLOSURE SIZE ADAPTED TO ALL PCR EQUIPMENT
The Biocap™ enclosures have been sized to receive tube racks, pipettes, minicentrifuges and thermocyclers.
PROTECTION OF THE OPERATOR
The enclosure is 10 mm thick so as to insure a full protection against UV and B rays.
AUTOMATIC SHUTT OFF OF THE UV LAMP
The UV lamp switches itself off automaticaly if the door is opened by accident while the lamp is still active.
*PCR is a patented process owned by Hoffmann-La Roche
|
|
|
|
|
|
Portable Safety Station for Personnel Protection
The LabGard® NU-813 is a Class I Biological Safety Cabinet that is an exceptional value and offers personnel protection for work in process where other cabinets are not appropriate choices. The NU-813 is a generation of exceptionally quiet enclosures that can be used with a micro-computer based balance. The open front allows room air to enter the hood, flowing past the operator into the work access opening, providing an air barrier which minimizes contaminants generated within the hood work zone from migrating into the room. The small cabinet size means it can be strategically placed for convenient handling of aerosols and particulates of low to moderate risk assessment.
The NU-813 automatically exhausts filtered air back into the room, or can be coupled from the exhaust collar to the building exhaust system, making the cabinet suitable for work with compounding powders. When used as a Containment Cabinet provides personnel protection for handling aerosols and particulate matter of low risk assessment. This configuration employs a 99.99% efficient HEPA filter. The NU-813 can also be used as a Ductless Fume Hood providing personnel protection from solvents such as those employed in cytology. This configuration uses either a Purafil® filter or a Charcoal filter.
The NU-813 is ideal for applications such as Life Science, Hospital and/or Pharmacy for the safe handling of powders or liquids, Animal facility for necropsy or other processes that require personnel protection.
|
|
|
|
|
|
Biological Safety Cabinet
The new CellGard NU-480 Laminar Flow Class II, Biological Safety Cabinet features the unique TouchLink Electronic Airflow Control System, a microprocessor module that establishes and maintains an optimum balance between the supply air system and exhaust air system through constant monitoring of airflow, using a digital dual thermistor airflow sensor and a digital differential velocity pressure flow grid. The information is received by the Electronic Control System to control both down flow and exhaust flow. The system maintains a complete diagnostic function and has remote contacts for remote sensing of various functions.
CellGard’s Decontamination Process - Decon 101, is a unique method to inactivate or destroy infection agents or neutralize toxic agents. This system uses formalin or liquid formaldehyde as the disinfectant agent and liquid ammonia as the neutralizing agent. The system is comprised of the Vaporizer, the Exhaust Canopy, with Vapor Collection Cartage and four [4] window clamps to insure a gas tight window seal. Activation of the system can be automatic using TouchLinkTM or done manually. The front hinged panel opens 30° for ease of manual cleaning.
The NU-480 is also available with Glass Side Walls which allows better viewing for Teaching and Educational Labs. Numerous ergonomically designed features for user comfort and adjustability: The new design gives you more leg room, service valves have been staggered on the sidewalls making them easily accessible and the base stand or base storage cabinet can accommodate an adjustable hydraulic lift to raise or lower the work surface to a full eight inches
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
