|
|
|
|
|
|
COMPACT WALL and DUCT AXIAL FANS (HCGB and TCGB)
The S&P COMPACT WALL and DUCT AXIAL FANS feature, as the name suggests, an extremely compact design created by the combination of an internal rotor motor mated with a direct drive wrap around impeller hub. This very low profile design optimizes airflow performance while minimizing noise generation. Both wall and duct mounted versions require an absolute minimum depth for any given wall, ceiling, panel or in-line duct mounted installation.
The S&P COMPACT WALL AXIAL FANS are designed to be installed directly into sidewalls, ceiling and panels and exhaust or supply air to the surrounding environments.
All COMPACT WALL AXIAL FANS include a one piece bell mouth inlet and mounting plate manufactured from high grade galvanized steel. The motor and fan impeller assembly are firmly supported within this mounting plate by a strong steel support frame that includes an integrated finger guard on the inlet side. All units are supplied with motors prewired to a wiring junction box located on the back of the motor hub for easy wiring access. This terminal box protects all wiring connections against the ingress of dust and moisture. The entire assembly is protected by a two stage primer and a tough corrosion and UV resistant polyester paint finish.
|
|
The SERIE EVI D-T-S axial ducted fans are especially suited to applications where it is necessary to feed humid or dusty air and poison gas. Number of blades: from 6 to 10. They are produced in painted steel and they are available in 3 versions:
D: direct-coupled motor, at temperatures up to 40°C, 60°C on demand;
T: belt-drive motor with belt pulley, trapezoidal belt, at temperatures up to 100°C, 150°C on demand;
S: projecting motor with low ring.
|
|
The HIB/HIT range of belt drive axial fans consists of three nominal fan sizes, 800, 1000 and 1250mm respectively. These three sizes can be supplied with 1ph 230V 50Hz or 3ph 400V 50Hz motors with various power ratings to achieve the required airflow performances.
Airflow performances range from 13,500 up to 40,700 m3/hr and pressures up to 265Pa.
All standard models include and automatically actuated louvre shutter fitted to the discharge side of the fan and a steel finger guard on the inlet side. In addition, a wide range of specialist accessories are available to complete any given installation.
|
|
Gas freeing axial fan compressed air drive, explosion proof design. Casing made of
stainless steel, impeller made of seawater-resistent aluminium. Application for chemical tanker.
|
|
In any situation in which air circulation improves working or production conditions, the Nylair® brings an adaptable solution:
- air cleaning and renewing,
- cooling of hot environments,
- acceleration of drying and evaporation,
- extraction of vapours and steams.
The Nylair® fans are axial fans covering a wide flow range (1000 to 35000 m3/h).
They of course, conform to CEE standards.
Their design allows for a direct and easy installation.
Their robust construction is ideal for arduous conditions:
- anti corrosion protection
- steel or thermoplastic and stainless steel impellers
|
|
Axial fan ETAvent system
Specification:
Axial fans equipped with integrated electronic commutation speed controls. The result is a highly efficient and extremely compact speed controlled fan. The electronically commutated ETAvent system offers the highest possible efficiency.
Attributes and special features:
Energy saving, without electronic motor noise, 100% speed controllable, integrated process controller.
Applications:
Refrigeration, agriculture, air conditioning, heating technology
|
|
Axial fan FE2owlet design
Specification:
7-sickle bladed, airfoil profiled, die-cast aluminium impeller, developed using bionic insights, size 800 mm, air volume (freeblowing) up to 26,000 m³/h
Attributes and special features:
best noise behaviour and lowest energy consumption, optimised for full bell mouth applications, 100% speed controllable
Applications:
air conditioning, refrigeration, transformer cooling
|
|
Axial fan FB design
Specification:
4-bladed aluminium sheet metal impeller, sizes from 350 to 650 mm, available in both air flow directions, 3 different blade angles, 60 Hz and UL types, air volume (freeblowing) from 2,000 to 13,000 m³/h, explosion-proof fans also available.
FB sizes 200-350mm: 5-bladed sheet metal impeller, sizes from 200 to 350 mm, available in both air flow directions, 50/60 Hz, UL and CCC types, air volume (freeblowing) from 700 to 2.800 m³/h,
Attributes and special features:
Universal fan for installation in equipment with short bell mouth, high flexibility by variation of blade angle and speed of motor, 100% speed controllable. From 350 mm size also available in explosion-proof design.
Applications:
Refrigeration, ventilation
|
|
Axial fan FB design, explosion-proof
Specification:
4-bladed aluminium sheet metal rotor, sizes from 350 to 650 mm, air volume (freeblowing) from 2,500 - 11,000 m³/h.
Attributes and special features:
Universal fan for installation in equipment, high flexibility by variation of blade angle and speed of motor, 100% speed controllable by voltage reduction.
Applications:
explosion-proof applications
|
|
Axial fan FC design
Specification:
7-bladed profiled die-cast aluminium impeller, sizes from 315 to 1,250 mm, available in both air flow directions, 60 Hz and UL types, air volume (freeblowing) from 2,000 to 62,000 m³/h.
Attributes and special features:
Optimised efficiency, optimised for full bell mouth applications, 100% speed controllable.
Applications:
Air conditioning, refrigeration, ventilation, drying, cooling, agriculture
|
|
Axial fan FE design
Specification:
7-sickle bladed profiled die-cast aluminium impeller, sizes from 315 to 1,000 mm, available in 60 Hz and UL types, air volume (freeblowing) from 2,200 to 26,000 m³/h.
Attributes and special features:
Optimised noise behaviour, optimised for full bell mouth applications, 100% speed controllable.
Applications:
Ventilation, air conditioning, heating, refrigeration, agriculture
|
|
Axial fan FH design
Specification:
7-sickle bladed die-cast aluminium impeller, sizes from 350 to 650 mm, 60 Hz types, air volume (freeblowing) from 2,600 to 11,500 m³/h.
Attributes and special features:
Steep performance curve, acoustically optimised, optimised for full bell mouth applications, 100% speed controllable by voltage reduction.
Applications:
Heating technology
|
|
Axial fan FL design
Specification:
5-bladed aluminium sheet metal impeller, sizes from 315 to 650 mm, available in both air flow directions, 3 different blade angles, 60 Hz and UL types, air volume (freeblowing) from 2,000 to 11,500 m³/h.
Attributes and special features:
Fan optimised for short bell mouth applications, enhanced fan curve stability, fan blade design optimised for low noise.
Applications:
Refrigeration, ventilation, heating
|
|
Axial fan FREvent system
Specification:
Axial fans equipped with integrated electronic frequency inverter speed controls. The result is a highly efficient and extremely compact speed controlled fan. The FREvent system is well priced, and is fitted with motors optimised for efficiency.
Attributes and special features:
The most energy efficient system, without electronic motor noise, 100% speed controllable, integrated process controller.
Applications:
Refrigeration, agriculture, air conditioning, heating technology
|
|
FY-25DSF1
Duct diameter = 200mm
Air volume = 600 m3/h
FY-28DSR
Duct diameter = 250mm
Air volume = 774 m3/h
FY-28DSM
Duct diameter = 250mm
Air volume = 1,194 m3/h
FY-35DSM
Duct diameter = 300mm
Air volume = 2,016 m3/h
FY-40DSL
Duct diameter = 350mm
Air volume = 2,894 m3/h
FY-40DSH
Duct diameter = 350mm
Air volume = 3,378 m3/h
FY-45DST
Duct diameter = 400mm
Air volume = 4,224 m3/h
FY-45DSL
Duct diameter = 400mm
Air volume = 4,898 m3/h
FY-40DTL
Duct diameter = 350mm
Air volume = 2,943 m3/h
FY-40DTH
Duct diameter = 350mm
Air volume = 3,210 m3/h
FY-45DTT
Duct diameter = 400mm
Air volume = 4,154 m3/h
FY-45DTL
Duct diameter = 400mm
Air volume = 4,817 m3/h
FY-45DTH
Duct diameter = 400mm
Air volume = 5,454 m3/h
FY-55DTL
Duct diameter = 450mm
Air volume = 7,414 m3/h
FY-55DTH
Duct diameter = 450mm
Air volume = 8,526 m3/h
|
|
Model: GED
Direct Drive Wall
Propeller Fan
Sizes 10 to 20 inch
380 to 5,200 CFM
Static Pressure to 1"
AMCA Air and Sound
|
|
FV-20AU9
Air volume = 580 m3/h
FV-25AU9
Air volume = 920 m3/h
FV-30AU9
Air volume = 1,200 m3/h
FV-20AL9
Air volume = 546 m3/h
FV-25AL9
Air volume = 835 m3/h
FV-30AL7
Air volume = 935 m3/h
FV-20RL7
Air volume = 546 m3/h (exhaust)
FV-25RL7
Air volume = 876 m3/h (exhaust)
FV-30RL6
Air volume = 990 m3/h (exhaust)
FV-20RG7
Air volume = 580 m3/h (exhaust)
FV-25RG7
Air volume = 945 m3/h (exhaust)
FV-30RG7
Air volume = 1,165 m3/h (exhaust)
FV-20AS2
Air volume = 516 m3/h
FV-25AS2
Air volume = 858 m3/h
FV-30AS2
Air volume = 1,182 m3/h
FV-15AST1
Air volume = 288 m3/h
FV-20DL307
Air volume = 560 m3/h
FV-25DL307
Air volume = 882 m3/h
|
|
Model: LC
Belt Drive Wall
Propeller FAn
Sizes 20 to 60 inch
3,000 to 40,000 CFM
Static Pressure to 1/2"
AMCA Air and Sound
Model: L2
Direct Drive Wall
Propeller Fan
Sizes 20 to 60 inch
600 to 55,800 CFM
Static Pressure to 1"
AMCA Air and Sound
Reversible Motors Available
Model: L3
Belt Drive Wall
Propeller Fan
Sizes 24 to 72 inch
27,00 to 85,000 CFM
Static Pressure to 1"
AMCA Air and Sound
Reversible Motors Available
|
|
|
We can provide many kinds of fans for the thermoelectric cooling system and also can provide the custom design.Please do not hesitate to contact us,if you have any requirment
|
|
FV-30XPT
Ventilating Fan - Industrial Type ( FV-30XPT )
Explosion proof series
Exhaust type
Blade size = 300mm
Single phase
Air volume = 1,740 m3/h
FV-40XPT
Ventilating Fan - Industrial Type ( FV-40XPT )
Explosion proof series
Exhaust type
Blade size = 300mm
Three phase
Air volume = 3,840 m3/h
|
|
| ... products without technical information |
| |
... see all the products in the category
Axial fans
|
|
|
