|
|
| The “FPF” series fan filters are widely recognised for their thin external profile, fashionable design, snap-mounting system and high performance. All models are Nema 12 and IP54 standard rated but, on request, alternatively available in Nema 3R and IP55 and also in EMC-shielded version. |
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324 |
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating. The high-performance axial fan provides high air circulation.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324 |
|
-Very low noise
-Minimal depth in enclosure
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324 |
|
COMMON FEATURES
The units allow a simple and cost effective solution for
enclosure cooling.
Designed for easy clip-on mounting and made out of high resistance, self extinguishing ABS UL94VO grade (RAL7035) they cover an air flow rate range from 35 m3/hr to 1100 m3/hr.
They provide an IP54 protection degree.
All the fans are mounted on ball bearings with MTBF of 40000 hours. |
|
Seifert has relied on consequent engineering for the four actual EMC filter fan models which have a lot to offer: suppression of up to 100dB thanks to a metallized EMC grid, a high protecting rating of IP55 & an assembly frame for easy mounting. A special feature of the largest model is the use of 4 separate economical fans for more air volume & less noise.
suppression of80...100 dB (up to 300 MHz)
air volume 21...300 m³/h EMV (Standart up to 550 m³/h)
complete sealing frame
reversable design cover
suitable outlet filter
quick press-in mounting |
|
... see all the products in the category
Axial fans
|
The Model 5200 Corner-Wrap Label Printer-Applicator with optional RFID encoding
Weber's Model 5200 Corner-Wrap label printer-applicator combines high-quality label printing with a specially designed label applicator that affixes a single label around the corner of a carton as it travels via conveyor line.
In addition to offering a selection of high-quality label print engines that addresses various print speeds and resolutions, the Corner-Wrap system is available with optional RFID print-encode engines from Zebra Technologies that will satisfy the emerging requirements of today’s supply chain.
Standard thermal/thermal-transfer print engines produce text, bar codes and graphic images at 203- or 300-dpi. The RFID models combine those capabilities with the encoding and verification of RFID inlays to meet the specifications of EPC Gen 1 and 2.
Engineered, manufactured and available only from Weber, the unit prints (or prints and encodes) labels in a next-out mode, automatically removes them from their liner, and retains them by vacuum on a swing arm-mounted tamp pad. As a carton approaches, the tamp pad applies the label to its front panel, then swings around the corner and wipes the remaining portion of the label on its adjacent side.
The Corner-Wrap system handles labels up to 4 inches wide and 12 inches in length, and will print and apply labels to a maximum of 15 cartons per minute delivered at least 24 inches apart at a top conveyor speed of 60 feet per minute.
|
|
* Ij3000 XLS Controller :
The Ij3000 XLS Controller was designed and built to meet any demanding coding application. Diagraph has engineered the XLS Controller to exceed performance expectations. The XLS Controller seamlessly integrates Impulse Jet and Integrated Valve technology offering a networking function that delivers reliable, high quality printing to any automated production enviroment.
* Ij3000 ES Controller :
The Ij3000 ES Controller is a powerful, low-cost web-server based HMI features a color touchscreen display, drives Diagraph’s Integrated Valve or Impulse Jet printheads, and has a 100-base T Ethernet network port for web browser, network connectivity. Diagraph has created special package “Ij3000 ES kits” for dual head Integrated Valve 9 or 18 dot printhead applications and has special introductory offer. Interested parties should call 800-722-1125 for details.
* NEW! IV-18 Dot Printhead for IJ3000 Ink Jet System
Diagraph is pleased to introduce the IV18-Dot Printhead for the Ij3000 Integrated Valve Large Character Ink Jet System. Key Standard Features Include: Two-piece, die-cast aluminum housing, environmentally sealed printhead for harsh environments, robust metal housing over entire printhead, built-in LED display and membrane switch for: -->channel purge (one or all channels) -->electronic pulse width (dot size) adjustment -->pressure gauge, automatic first dot correction, overdrive protection, photocell mounting bracket holes, backwards compatibility with existing Ij3000 and Series 1 printheads. The IV-18 Dot Printhead is driven by Diagraph’s Ij3000 Ink Jet Printing System. |
|
Videojet P3400 Label Printer Applicator
The Videojet P3400 label printer applicator is easy to use and maintain, and features the versatility of modular spares to deliver maximum uptime and performance. Available with multiple printer options and a variety of application choices, the Videojet P3400 provides a customizable, off the shelf solution.
Simple, modular design
RFID Enabled
High quality thermal transfer printing
Built to last in the most rugged industrial environments
User configured beacon and status output
Multiple label configuration menu
Flight time compensation for automatic label placement control
Ethernet connectivity for set-up and control
*THIS ITEM IS CURRENTLY AVAILABLE ONLY IN NORTH AMERICA |
|
Logitron 400 series are label printer applicators for boxes, cases and cartons are modular systems which can be configured according to the needs of the customer. Logitron 400 products operate in tamp and blow, swing arm tamp or wipe mode and can apply labels to all sides of a stationary or moving product.
They may be controlled from a Siemens PLC or an optional colour touch screen interface or via a network PC
The key features of Logitron 420 box labellers are:
- Fully compatible with Logisoft message design, printer control and networking software and Logitrace track and trace software.
- Built using proven industry-standard components from blue-chip suppliers.
RFID compliants.
- Choice of application and print modules to enable correct choice of label size and print resolution.
- Designed, built and operated in accordance with LogiGoTM minimum down-time maintenance and service principles. |
|
Real time labels Print & Apply System for labelling dynamic processes. It has been developed to satisfy awide range of labelling needs in boxes, packs, sets and sacks.Easily adapts when various fields label printing and applicationis needed in half speed situations.
The print and apply kit can be adjusted for perfect applicationsin any direction and position: Top and Sides. Application distance depends on production line characteristics and application placeas well as on the type of pack to be labelled. Its working speeddepends on label size reaching up to 45 labels/minute. |
|
Unit designed and produced by United Barcode Systems as a real time labels Print & Apply System for two side corner box. Perfect for labelling corner solutions.
Solid system made for industrial environments. Its base height is regulating in order to adapt all kind of production and packaging lines and uses synchronisation and alarm signals.
Its working speeddepends on label size reaching up to 45 labels/minute.The APL-2000 can be connected to any computer system;Windows NT, UNIX, AS/400, PC, etc... and ERP environments. |
|
| ... products without technical information |
| |
mobile 19" Racks:
SPS-Racks (shock protection system): cases used for carriage of sensitive electronics, f.e. mobile server / digital video.
In a reinforced flightcase the 19" steelframe is with a special feather- absorbing-system swingingly supported.
We likely place our individual customer service about all ProCase products at your disposal. |
|
Boxes for the integration of electronic equipment.
Cases or containers made with polyester or polypropylene. |
|
Racks with increase in value – one complete system
Integrated solutions, with which your complete equipment is always operational.
The concept: The case becomes the housing. In the 19"-Format and if desired
freight-suited or rollable. With EMV protection and IP degree of protection for safe mobile work also under most difficult conditions. Here quality and achievement are correct.
Technic on board - all in one.
When desired this manufacturer takes over manufacturing including procurement of all technical components: Professional installation and wiring. Starting from exhaust, sockets, cold device plugs and Connector plates up to TFT screens and front plates with resistant to friction imprints. Extendable work surfaces, opening by hinges and protective covers make the handling even more comfortable. Inclining/slanting feet and glare shield mechanisms provide for the correct point of view. Completely individually as required.
Plug & Play
Already prove your competence when simply opening the housing of the case. By inserted technology, which functions on simply pushing a button. These cases are individual, convincing complete solutions, which always offer you or your customer to you a clear increase in value at any time. |
|
This versatile line of shock-mounted rugged aluminum cases has been thoughtfully engineered to satisfy the growing need for rack-mounted electronics in the field. They are ideal for the safe transportation and field operation of delicate electronic instruments, and offer a host of practical user benefits.
Installation of rack mounted equipment is quick and easy, with total accessibility from both the front and the rear. |
|
| The ZERO Warrior Rack mount case is a rotomolded, double-entry case designed and engineered to provide complete protection for the most sensitive E.I.A. 19" rack mount equipment and instrumentation. Your equipment is assured of security and protection - inside and out. Available in select U-sizes, colors and configurations. |
|
| The patent-officially protected aluminum luggage system S2000 offers 19 " installation types of HE 2 to HE 12 with all luggage types. Alternatively also circulating or 19 " edition angles can be inserted. |
|
| ... products without technical information |
| |
Universal Sorting and Equalizing System
The UES is a product routing system as an extension to an automatic price labeler. It intelligently compiles batches, boxes or bags with a standardized fixed weight from a choice of products with weight tolerances. Therefore, the UES helps to optimize product usage of food, non-food, fresh and frozen products. The import of the product weights through a standardized data interface from a price labeler saves an additional weighing process.
- Reduces/saves up to 75% of give away depending on product
- Comes in standard design with 4, 6, 8, 10 or 12 channels, but also various options for special production environments available
- Different designs and constructions of the channels to fit various product classes
- Special design for instant filling of bags or various containers optional, as well as release to transport -belt or -roll systems
- Integration in robot systems possible
- Packing table for outer cases
- Working with labeled and wrapped or foiled products
- Compact and space-saving design
- Easy-use and intuitive 10,4“ TFT colour display with softkey controls
- Clearly arranged display symbols, easy-to-capture production data
- Detailed statistical information and functions, including breaks and downtimes
- Allows for additional processes like sorting, equalizing, calibrating and counting, also in simultaneous mode
„The investment into an equalizing system made instant product savings possible and had a short-term payback time“ |
|
| ... products without technical information |
| |
|
|
see the results for the following category
