|
|
Axiciat VA
Draws fresh air in and expels smoke. Designed for use in commercial and industrial buildings.
- Short (standard) or long (optional) galvanised steel casing
- Multiblade aluminium impeller with adjustable-pitch blades (adjustable when rotor has stopped)
- Two-piece cast aluminium hub allows blade pitch to be adjusted when rotor has stopped
- Internal motor support
- Single-speed motor (three-phase, 230/400V, 50 Hz) or two-speed motor (three-phase, 400 V, 50 Hz), IP55, coupled directly to hub
- Numerous accessories
Nine models available
Available pressure up to 750 Pa
Air flow rates: 1,250 to 95,000 m³/h
|
|
CHV Series
Features:
1. Compact, large airflow, and low noise
2. Bellmouth design of casing, high airflow
3. Steely bearings, suitable for continuous applications
4. Can be installed by horizontal, vertically, and obliquely directions
Casing and impeller are made by sheet steel
|
|
|
The range presented in this chapter consists of axial fans (VRE), with grill (VGR) or basket grill (VPR), round (VGV) or square (VGC) rings, and threephase motor (VREt, VGRt, VPRt, VGVt, VGCt). In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements.
|
|
HJB MANN
HJB 80 - HJB 120
DESCRIPTION:
Helicoidal fans
Airflow: 32.000 - 45.000 m3/h
APPLICATIONS:
- General ventilation.
- Renovation of suffy air enviroment.
- Poultry farms and greenhouses.
|
|
Mounting size for AC-input: 80mm - 250mm
Mounting size for DC-input: 42mm - 119mm
Air capacity 0.18m³/min - 24m³/min
Static pressure 12Pa - 360Pa
AC-input: 200/220/230V AC or 100/110/115V AC
DC-input: 12V DC or 24V DC
Marking: CE, UL and cUL
Long-life type also available (MDE-Series).
|
|
Axial duct fans EZR/DZR for commercial use: durable, powerful and robust
For ventilation or air extraction of
· Showrooms
· Foreman%u2019s offices
· Workshops
· Production sites
As well as for machine extraction
High degree of protection IP55
Can be fitted in any position
Duct sleeve made of galvanised sheet-steel, with flanges on both sides
Single phase AC version (EZQ/EZS) and three-phase AC version (DZQ/DZS)
Pole-changeable version, for two speeds
Special versions available on request
Air flow volume up to 15,000 m³/h
|
|
Axial wall fans EZQ / DZQ resp. EZS / DZS: for commercial use: durable, powerful and robust
For ventilation or air extraction (“E”-version only for air extraction) of
Production facilities
Commercial premises
Garages
Portacabins
Storage facilities
High degree of protection IP55 resp. IP54
Can be fitted in any position
With square wall plate (EZQ/DZQ) or wall ring (EZS/DZS)
Single phase AC version (EZQ/EZS) and three-phase AC version (DZQ/DZS)
Pole-changeable version for 2 speeds
Special versions available on request
Air flow volume up to 15,000 m³/h
|
|
Brushless DC Fans and Impeller Style Blowers...
offer multi-speed aerodynamic performances for all types of high airflow applications. Our standard designs come with fully integrated electronics and are available in various input voltages including 12 and 24 VDC (13.8 and 27.6 VDC). Environmentally resistant designs are also available for those applications that may require exposure to natural elements. With airflow exceeding 1900 CFM, these products combine the long life expectations of brushless DC products with maximum cooling and air moving capability.
|
|
Explosion-proof fans to be used in potentially explosive areas
Type-examination tested according to European Directive 94/9/EC (ATEX)
Device group II, Category 2 G
Type of protection “e”: Increased safety
For zones 1 und 2
The following types of construction are available:
Axial wall fans
EZQ-E Ex e / DZQ-E Ex e with square wall plate
EZS-E Ex e / DZS-E Ex e with steel wall ring
Single phase AC version (EZQ- resp. EZS-E Ex e) and three-phase AC version (DZQ- resp. DZS-E Ex e)
Air flow volume up to 10,400 m³/h
Semi-centrifugal duct fans ERM-E Ex e
Single phase AC version
Air flow volume up to 870 m³/h
Axial duct fans DZR-E Ex e
Three-phase AC version
Air flow volume up to 10,500 m³/h
Axial roof fans DZD-E Ex e
Three-phase AC version
Air flow volume up to 7,100 m³/h
|
|
|
The “FPF” series fan filters are widely recognised for their thin external profile, fashionable design, snap-mounting system and high performance. All models are Nema 12 and IP54 standard rated but, on request, alternatively available in Nema 3R and IP55 and also in EMC-shielded version.
|
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
-Very low noise
-Minimal depth in enclosure
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating. The high-performance axial fan provides high air circulation.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
COMMON FEATURES
The units allow a simple and cost effective solution for
enclosure cooling.
Designed for easy clip-on mounting and made out of high resistance, self extinguishing ABS UL94VO grade (RAL7035) they cover an air flow rate range from 35 m3/hr to 1100 m3/hr.
They provide an IP54 protection degree.
All the fans are mounted on ball bearings with MTBF of 40000 hours.
|
|
|
The range presented in this chapter consists of axial fans (VRE), with grill (VGR) or basket grill (VPR), round (VGV) or square (VGC) rings, and threephase motor (VREt, VGRt, VPRt, VGVt, VGCt). In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements.
|
|
The roof filter fan, with natural or forced ventilation, facilitates excellent internal air flow, removing dissipated heat from the cabinet.
The “TP” series in plastic construction, features reduced dimensions and a standard connection by terminal block.
|
|
-Very low noise
-Minimal depth in enclosure
-High through-flow air volume
-Uniform air circulation
-High reliability
-Time-saving installation
Roof filter fans and roof exit filters find use in enclosures, from which warm air has to be diverted due to increased heat development.
The ready-to-connect, low-noise roof filter fan, which houses four axial fans, is used to expel warm air from within the enclosure which has been generated by the stray power of the components.
The roof exit filter provides passive ventilation.
Approvals: UL File Nr. E 234324
|
|
Circulation fan for switchgear cabinets
With swing frames for the purposeful ventilation of heat sources in the switchgear cabinet
Housings and swing frames consist of steel sheet galvanized
Tensions: 12V - 230V
|
|
Filter exhaust IP55
Jet water-protected filter exhaust
with Stahlblechgehäuse, powder-coats
Filter cartridge with exchangeable Viledon filter mat
Tensions: 12V - 230V
|
|
|
Axial ventilators: square ventilators, round ventilators, miniature ventilators, ventilators 120x120mm, external rotor ventilators, accessories (resistances, protective grills, filters, connectors), etc
|
|
OPPUS® Air-Driven Reaction Fans
Rugged, cast aluminum housing and fan blade make these fans ideal for hazardous locations and demanding ventilation projects. The RF design utilizes action-reaction principles; compressed air is discharged through nozzles located at the tip of the fan blades providing extremely efficient, high-volume, low maintenance air movers.
FEATURES (RF-20, RF-24):
- 11,000 to 16,900 cfm (18,689 to 28,713 m3/hr) at 80 psig
- Use for fresh air supply or fume exhaust
- Can be carried or rolled to job site
- Spark resistant cast aluminum housing and fan blade
- Permanently lubricated bearings
- Flanges mate with 20-inch (508mm) and 24-inch (610mm) API tank opening
|
|
Design Complete axial fans (motor + ring-/or tubular housing with attached console + impeller + protective mesh) Used in the 200 - 600 Pa pressure range and for air volumes of 2,000 - 8,000 m3/h. Media temperatures - 40 to + 60 °C
Main applications Rail vehicle transport technology, air conditioning rail version
Special applications Cooling and ventilation, air conditioning with noise insulation
Performance range 370 - 2200
|
|
Marine Duty installations require reliability, low maintenance, long life, corrosion resistance, heavy duty construction, and the flow and pressure capability in a compact package all required come together in our marine duty fans. Our Marine Duty Fans and Blowers are constructed to meet or exceed U.S. Coast Guard and U.S. Maritime Administration Standards.
Sizes from 12" to 60" with CFM from 1,154 to 91,864 at free air and up to 3" SP.
|
|
- Speed-controllable
- Integral thermal contacts
- Maintenance-free and reliable
The AW/AR fans have speed controllable external rotor motors.
AW fans have square plates for wall mounting, AR fans have
round flanges for duct mounting. Casings manufactured from
galvanised steel, painted in standard black. The fans have
aerofoil blade impellers in die-cast aluminum, painted in
standard black.
To protect the motors from overheating the fans have
integral thermal contacts with external leads for connection
to a motor protection device.
|
|
|
The SERIE EV-6 axial electrical fans are especially suited to applications where it is necessary to interchange the air in the rooms and for other specific industrial applications. They are equipped with conveyor, motor support and protective grid. Number of blades: 6
|
|
The SERIE EVI D-T-S axial ducted fans are especially suited to applications where it is necessary to feed humid or dusty air and poison gas. Number of blades: from 6 to 10. They are produced in painted steel and they are available in 3 versions:
D: direct-coupled motor, at temperatures up to 40°C, 60°C on demand;
T: belt-drive motor with belt pulley, trapezoidal belt, at temperatures up to 100°C, 150°C on demand;
S: projecting motor with low ring.
|
|
The Quiet Type
The high volume/low speed operation, coupled with 1-to-2 hp motors and a Variable Frequency Drive all make for a quiet and highly-efficient fan.
No Science Friction
Our fans use an in-line helical gear reducer for almost frictionless power transmission. Smooth operation ensures less wear and tear.
|
|
- Frame Size: 25x25 ~ 170x170
- Bearings: sleeve & ball bearings
- Voltages: 5/12/24/48VDC or 115/230VAC
- Special: tachometer output, alarm output, resistance protection, auto start, thermal speed control
|
|
... see all the products in the category
Axial fans
|
|
|
