|
|
Circulation fan for switchgear cabinets
With swing frames for the purposeful ventilation of heat sources in the switchgear cabinet
Housings and swing frames consist of steel sheet galvanized
Tensions: 12V - 230V
|
|
|
The “FPF” series fan filters are widely recognised for their thin external profile, fashionable design, snap-mounting system and high performance. All models are Nema 12 and IP54 standard rated but, on request, alternatively available in Nema 3R and IP55 and also in EMC-shielded version.
|
|
Filter exhaust IP55
Jet water-protected filter exhaust
with Stahlblechgehäuse, powder-coats
Filter cartridge with exchangeable Viledon filter mat
Tensions: 12V - 230V
|
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating. The high-performance axial fan provides high air circulation.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
-Very low noise
-Minimal depth in enclosure
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
COMMON FEATURES
The units allow a simple and cost effective solution for
enclosure cooling.
Designed for easy clip-on mounting and made out of high resistance, self extinguishing ABS UL94VO grade (RAL7035) they cover an air flow rate range from 35 m3/hr to 1100 m3/hr.
They provide an IP54 protection degree.
All the fans are mounted on ball bearings with MTBF of 40000 hours.
|
|
The filterfans (European Patent-No. 0439667), indispensable if you want to ensure optimum air circulation inside your switchgear equipment, are a Pfannenberg invention - very good in terms of quality, design, availability and value for money.
Protection systems up to IP 55 and approvals from UL and GL provide you with
the level of safety that is an absolute must for your production facility.
|
|
Seifert has relied on consequent engineering for the four actual EMC filter fan models which have a lot to offer: suppression of up to 100dB thanks to a metallized EMC grid, a high protecting rating of IP55 & an assembly frame for easy mounting. A special feature of the largest model is the use of 4 separate economical fans for more air volume & less noise.
suppression of80...100 dB (up to 300 MHz)
air volume 21...300 m³/h EMV (Standart up to 550 m³/h)
complete sealing frame
reversable design cover
suitable outlet filter
quick press-in mounting
|
|
... see all the products in the category
Axial fans
|
aluminum framing for factory automation
We can offer the best China-made aluminmum extrusion profile and accessories of MODULAR ASSEMBLY SYSTEM, including 20mm, 30mm, 40mm,45mm,50mm,60mm profile and connection elements, fasteners(t-nuts, t-bolts, subsequent nuts etc.), leveling feet, hinges.
We have ten years experience in this field and got a well reputation in Chinese market. Since the year 2008, we begin to step into International market. International quality, Chinese prices, believe that we can bring to you more suprise.
|
|
FlexLink offers a wide assortment of aluminum profiles and accessories such as connectors, fasteners, feet, etc to build machine frames and safety enclosures. Pre-assembled enclosure sections and sliding door profiles as well as linear units are also available.
Structural system XC (module 44 mm)
Structural system XC is based on aluminium beams with T-slots for easy interconnections and attachment of external devices. The system is based on the 44 mm module. Beam sizes in the XC system range from 24x24 mm up to 176x88 mm.
The system offers sturdy components which provide high load capacity for both static and linear motion systems. It is used within a wide range of applications, from frameworks, workbenches and enclosures to special machinery, pick and place units and gantry robots.
Structual system XF (module 30 mm)
Structual system XF consists of a range of standard components with emphasis on enclosure applications based on the 30 mm module. It includes two basic beam types, the support beams (XFBM) in cross-sectional dimensions 30 mm x 30 mm and 30 mm x 60 mm as well as several enclosure beams (XFEB) intended for enclosure frameworks. The system also includes other components for enclosures, including hinges, handles, strips for nets and panels, etc.
|
|
Need a special configuration, size, or color? It's easy to convert your specs to reality with customizable features from Zero Manufacturing. Our modified stock cases and complete custom designs represent the most diverse options for the optimal protection of your products.
Zero Manufacturing is the leading source for customizable commercial, industrial, and military cases. Offering over 100,000 pre-tooled sizes of deep drawn enclosures of virtually unlimited sizes and configurations, Zero's varied aluminum products can be customized and modified with processes such as drilling, laser cutting, riveting, welding, brazing and so much more. Custom accessories are also available for many of Zero's products to meet your individual requirements, contact us for more information.
|
|
MADE-TO-MEASURE TELESCOPIC COVERS
7000 types of protective covers already available
All models of covers, all brands of machines
Horizontal, vertical, rail, double axis protection…
Measurements carried out on machine or on model
Made-to-measure telescopic cover supplied in 4 weeks
12-month guarantee
RECONDITIONING SERVICE :
Our teams take over your current worn or even damaged cover and we guarantee complete reconditioning within 3 DAYS.
40 to 60% less expensive than purchasing a new cover Water-tightness,
Guiding, sizing, finishing…
Technical improvement of original cover Complete reconditioning in less than 1 week Minimum guarantee 6 months.
|
|
BUWW custom enclosures are engineered to our customer's specifications. Our proven design provides friction free doors hydraulically, pneumatically, or manually operated.
The doors are built with linear rail design or conventional roller design based on our
customer's requirements.
After taking into consideration the rigidity of the machine, the hinges, locks and fasteners are specially designed per our customer's specifications.
In addition, we have capabilities to provide an ergonomic design, soundproof walls, lighting and provisions for hydraulic hoses and electrical ductwork.
BUWW can provide many options, such as, cable runs, backwards compatibility, special holes, floor mounting, 2" or 4" acoustic panels, lighting fixtures, mist collection, various sizes, materials and finishes. Our enclosures are engineered with a small foot print and a large mounting space.
|
|
- Frame-machines
- Chassis/Housings
- Enclosures
- Latticed Protector
- Setting in conformity
- Ergonomics
- Various Supports
- The Council/Definition
- Study/plan CAD 3D
- Delivery in kit or turn-key
|
|
Realization to measure of frames and cartérisations of machines starting from the sections aluminum. By combination of basic elements, of connection on the ground and fixings of panels, it is possible to create the protections in conformity with the safety regulations standards or adapted to the specifications of the users.
Possibility of carrying out doors beating, sliding, or guillotines with electric safety or not.
Delivery in kit or assembly.
|
|
Misumi is the NO 1 supplier of over 500,000 standard and customised components for Mechanical Factory Automation/Special Purpose Machinery, Press Dies and Plastic Mould. We delivery components europewide in averagely 6 – 8 days GUARANTEED DELIVERY from the day of purchase, stock items available from 2 days delivery.
Misumi components are different in that they can be configured to your need using our unique part coding system. Dimensions, materials and special machined requests can all be selected within the misumi system enabling engineers and designers to achieve a configured parts as standard with no extra machine costs. Standard items are also available via the catalogues.
All components can be designed using the Misumi CAD portal . Compatible with industry wide packages a designer can configure our parts at the touch of a button in up to 0.01mm, and download in seconds saving valuable design time, registration required.
To receive our extensive catalogue and save valuable time and money, visit our website or request yours today by clicking the request banner.
MISUMI – Precisely what you need.
|
|
Unique housed bearing assemblies made by Rino Industries in the UK. Round, double flat or square shapes are available as standard in either single or double configurations in zinc plated steel. All are supplied with bearings & circlips fitted as standard with many sizes available off the shelf from stock.
Specials to your requirements are also easily produced, please send in your drawings or samples for a free, no obligation quotation.
|
|
SNC pillow block range: a pillow block unit, a Premier bearing = a perfect combination!
A new generation of pillow block units has been developed by SNR. It is the result of 20 years of application know how for bearing housings.
The additional benefits include:
• Excellent housing stiffness,
• Better heat dissipation due to intelligent housing geometry and use of regulation disc,
• Simplification of the assembly process.
The wide range of bearings and sealing solutions (double lip seal, V-ring seal, taconite seal, labyrinth seal…), with shaft diameters ranging from 20 to 160 mm plus the interchangeability with other market products, SNR offers you a wide choice of application needs.
Combined with our SNR Premier spherical roller bearing range, SNR pillow block units offer a complete range of performance requirements.
Try them!
|
|
FAG housing and bearing units have successfully been used in machinery, installations and equipment.
FAG bearing housings are usually made of greycast iron.
As a rule, the bearing seats in the housings are machined in such a way that the bearings can be
displaced, i.e. they are of the floating type. All outer surfaces of FAG housings and housing parts are provided with a universal coat of paint (colour RAL 7031, bluish grey).
Depending on the operating conditions, the bearing housings can be sealed with rubbing seals, non-rubbing seals, and combinations of both.
|
|
Radial insert ball bearings are single row, rady-to-fit units comprising a solid outer ring, an inner ring extended on one or both sides, cages made from plastic or sheet steel and P, R, L or T seals. Bearings with an inner ring extended on both sides undergo less tilting of the inner ring and therefore run more smoothly.
The outer ring has a crowned or cylindrical outside surface. In conjunction with an INA housing matched to the bearing type, bearings with a crowned outside surface compensate for shaft misalignments; see Compensation of misalignments.
They are located on the shaft by means of an eccentric locking collar, grub screws in the inner ring, an adapter sleeve, drive slot or fit. Radial insert ball bearings are particularly easy to fit, suitable for drawn shafts of grade h6 to h9 and, with a few exceptions, can be relubricated.
Some series with an eccentric locking collar and with grub screws in the inner ring are also available with an inch size bore.
|
|
Type : Material : Hardness : Surface Treatment RoHS CAD Data
BGTNB 1045 Carbon Steel - Black Oxide Compliant
BGTN 1045 Carbon Steel - Electroless Nickel Plating Compliant
SBGTN 304 Stainless Steel - - Compliant
|
|
Universal Sorting and Equalizing System
The UES is a product routing system as an extension to an automatic price labeler. It intelligently compiles batches, boxes or bags with a standardized fixed weight from a choice of products with weight tolerances. Therefore, the UES helps to optimize product usage of food, non-food, fresh and frozen products. The import of the product weights through a standardized data interface from a price labeler saves an additional weighing process.
- Reduces/saves up to 75% of give away depending on product
- Comes in standard design with 4, 6, 8, 10 or 12 channels, but also various options for special production environments available
- Different designs and constructions of the channels to fit various product classes
- Special design for instant filling of bags or various containers optional, as well as release to transport -belt or -roll systems
- Integration in robot systems possible
- Packing table for outer cases
- Working with labeled and wrapped or foiled products
- Compact and space-saving design
- Easy-use and intuitive 10,4“ TFT colour display with softkey controls
- Clearly arranged display symbols, easy-to-capture production data
- Detailed statistical information and functions, including breaks and downtimes
- Allows for additional processes like sorting, equalizing, calibrating and counting, also in simultaneous mode
„The investment into an equalizing system made instant product savings possible and had a short-term payback time“
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
