|
|
FY-24PDC
Ventilating Fan - Large Size Type ( FY-24PDC)
Large size series
Exhaust type
Three phase
Air volume = 10,800 m3/h
BV-30PDB
Ventilating Fan - Large Size Type ( BV-30PDB )
Large size series
Exhaust type
Three phase
Air volume = 16,800 m3/h
|
|
In-Line Tube Fans (RS)
made of plastic
from 100- 315 mm tube diameter
max. V= 1.760 m³/h
max. pt= 720 Pa
completely corrosion resistant
100% speed controlable
high pressure
Application:
ventilation for residential and industrial zones
|
|
In-Line Tube Fans (R)
made of steel
from 100- 400 mm tube diameter
max. V= 5.330 m³/h
max. pt= 900 Pa
easy electrical connection
100% speed controlable
can be installed in any position
Application:
ventilation for residential and industrial zones
In-Line Tube Fans (RS)
made of plastic
from 100- 315 mm tube diameter
max. V= 1.760 m³/h
max. pt= 720 Pa
completely corrosion resistant
100% speed controlable
high pressure
Application:
ventilation for residential and industrial zones
|
|
FY-25DSF1
Duct diameter = 200mm
Air volume = 600 m3/h
FY-28DSR
Duct diameter = 250mm
Air volume = 774 m3/h
FY-28DSM
Duct diameter = 250mm
Air volume = 1,194 m3/h
FY-35DSM
Duct diameter = 300mm
Air volume = 2,016 m3/h
FY-40DSL
Duct diameter = 350mm
Air volume = 2,894 m3/h
FY-40DSH
Duct diameter = 350mm
Air volume = 3,378 m3/h
FY-45DST
Duct diameter = 400mm
Air volume = 4,224 m3/h
FY-45DSL
Duct diameter = 400mm
Air volume = 4,898 m3/h
FY-40DTL
Duct diameter = 350mm
Air volume = 2,943 m3/h
FY-40DTH
Duct diameter = 350mm
Air volume = 3,210 m3/h
FY-45DTT
Duct diameter = 400mm
Air volume = 4,154 m3/h
FY-45DTL
Duct diameter = 400mm
Air volume = 4,817 m3/h
FY-45DTH
Duct diameter = 400mm
Air volume = 5,454 m3/h
FY-55DTL
Duct diameter = 450mm
Air volume = 7,414 m3/h
FY-55DTH
Duct diameter = 450mm
Air volume = 8,526 m3/h
|
|
FV-20AU9
Air volume = 580 m3/h
FV-25AU9
Air volume = 920 m3/h
FV-30AU9
Air volume = 1,200 m3/h
FV-20AL9
Air volume = 546 m3/h
FV-25AL9
Air volume = 835 m3/h
FV-30AL7
Air volume = 935 m3/h
FV-20RL7
Air volume = 546 m3/h (exhaust)
FV-25RL7
Air volume = 876 m3/h (exhaust)
FV-30RL6
Air volume = 990 m3/h (exhaust)
FV-20RG7
Air volume = 580 m3/h (exhaust)
FV-25RG7
Air volume = 945 m3/h (exhaust)
FV-30RG7
Air volume = 1,165 m3/h (exhaust)
FV-20AS2
Air volume = 516 m3/h
FV-25AS2
Air volume = 858 m3/h
FV-30AS2
Air volume = 1,182 m3/h
FV-15AST1
Air volume = 288 m3/h
FV-20DL307
Air volume = 560 m3/h
FV-25DL307
Air volume = 882 m3/h
|
|
FV-30XPT
Ventilating Fan - Industrial Type ( FV-30XPT )
Explosion proof series
Exhaust type
Blade size = 300mm
Single phase
Air volume = 1,740 m3/h
FV-40XPT
Ventilating Fan - Industrial Type ( FV-40XPT )
Explosion proof series
Exhaust type
Blade size = 300mm
Three phase
Air volume = 3,840 m3/h
|
|
|
Fans are manufactured using Induction Motors. These motors range from sizes 18 (1.75" diameter) to 44 (4.38" diameter). Custom units are also available.
|
|
Seifert has relied on consequent engineering for the four actual EMC filter fan models which have a lot to offer: suppression of up to 100dB thanks to a metallized EMC grid, a high protecting rating of IP55 & an assembly frame for easy mounting. A special feature of the largest model is the use of 4 separate economical fans for more air volume & less noise.
suppression of80...100 dB (up to 300 MHz)
air volume 21...300 m³/h EMV (Standart up to 550 m³/h)
complete sealing frame
reversable design cover
suitable outlet filter
quick press-in mounting
|
|
|
|
|
|
Ceiling Fan - Standard Type ( F-480Z1 )
Compact regulator series
3-blade design
48 inches (1,200mm) blade span
Ceiling Fan - Standard Type ( F-560Z1 )
Compact regulator series
3-blade design
56 inches (1,400mm) blade span
Ceiling Fan - Standard Type ( F-480Z2 )
Standard regulator series
3-blade design
48 inches (1,200mm) blade span
Ceiling Fan - Standard Type ( F-560Z2 )
Standard regulator series
3-blade design
56 inches (1,400mm) blade span
Ceiling Fan - Standard Type ( F-600Z2 )
Standard regulator series
3-blade design
60 inches (1,500mm) blade span
Ceiling Fan - Standard Type ( F-480SS)
Compact regulator series
3-blade design
48 inches (1,200mm) blade span
Ceiling Fan - Standard Type ( F-600SS )
Standard regulator series
3-blade design
60 inches (1,500mm) blade span
Ceiling Fan - Standard Type ( F-480XW )
Compact regulator series
3-blade design
48 inches (1,200mm) blade span
Ceiling Fan - Standard Type ( F-600XW )
Standard regulator series
3-blade design
60 inches (1,500mm) blade span
|
|
F-11SXW
Low ceiling series
Suitable for rooms with low ceiling height
3-blade design
Sleeping mode
1 / 3 / 6 hour timer
Wireless remote controlled
44 inches (1,100mm) blade span
|
|
F-56TXZ
Deluxe series
4-blade design
Sleeping mode
1 / 3 / 6 hour timer
Wireless remote controlled
56 inches (1,400mm) blade span
F-60WWK
Deluxe series
5-blade design
1/f Yuragi function
1-8 hours timer with sleep model
Wireless remote controlled
60 inches (1,500mm) blade span
F-564RZ
Deluxe series
4-blade design
Sleeping mode
1 / 3 / 6 hour timer
Wireless remote controlled
56 inches (1,400mm) blade span
F-56TXW
Deluxe series
4-blade design
Sleeping mode
1 / 3 / 6 hour timer
Wireless remote controlled
56 inches (1,400mm) blade span
|
|
| ... products without technical information |
| |
... see all the products in the category
Axial fans
|
Series: K2.. 90 to 355
Output range: 0.25 kW to 500 kW
Class: 3,000; 1,500; 1,000; 750 rpm, lower speeds and pole-changeable versions on request
Features: Energy-efficient and environment-friendly, suitable for frequency converter supply, designed to DIN EN 60034 (IEC 72) and pr EN 12101-3, mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey-cast iron design, versions for jet fans without shaft-mounted fan or pad-mounted, robust low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, class F insulation with thermal reserve, class H and higher possible, various modifications available
|
|
|
|
|
|
Applications
These smoke removal systems are applied in a broad range of applications including large buildings, shopping malls, factories, warehouses, enclosed parking lots, tunnels, among others. In other words, they are used where a large concentration of people in commercial and industrial facilities is present.
Standard Features
Output: 0.12 up to 355kW
Multivoltage - (220-240/380-415//440-460V or 380-415/660-690//440-460V)
Ventilation Motor, TEAO
Cast iron frames (80 up to 355M/L)
Pad Mounted (frames 80 up to 250S/M)
Mounting: B3L (frame 280S/M and above)
Degree of Protection: IP55
Flying leads 1 meter long
Squirrel cage rotor/Aluminium die cast
Stainless steel nameplate AISI 316
Class "F" insulation
Continuous duty - S1 (S2 - 200°C/2h once only)
Ambient temperature: 40°C , 1000 m.a.s.l.
Regreasing nipples from frame 225S/M and above
Thermistors (1 per phase) fitted in frame 160M and above
Paint color: Silver
Optional Features
Single voltage (other voltages)
Degree of Protection: IP56, IP65 or IP66
Other mounting configurations
Terminal Box
Self Ventilated, TEFC
Thermal protection:
Thermistors for frame 132S and below (Standard for frame 160 and above)
Thermostats
RTD-PT 100
Space heaters
Class "H" insulation
Roller bearings for frame 160M and above
|
|
|
A tempering furnace provided at the later stage of the carburizing and hardening process ensures uniform temperature distribution by hot air circulation in the furnace. This is achieved by means of a large capacity fan and soaking plates. Two series are available-for high temperature applications and low temperature applications.
|
|
|
We produce radial fans and impellers since 1987. High quality, competitive price...Please contact us for more details.
|
|
Notes:
1. Element diameter is 63.5 mm with cover.
2. Pressure drop calculations based on 20 micron elements.
3. Element length is for mesh pack and does not include end fitting.
4. Polymer viscosity is 250 Pas (2500 Poise).
5. Design conditions are 241.5 Bar (3500 psi) and 343.5C (650F).
6. Vessel material is 304SS and system is designed per ASME Code.
7. System configuration is MPST's patented close-coupled design.
8. System includes manual vent valves and hydraulically automated diverter valves with control panel.
9. System prices are Ex Works Maag Factory.
Options Available:
A. Actuated Vent Valves
B. Drain Valves (manual and actuated)
C. Plunger and spool valves available upon request
|
|
FV-40BD1H
Thermo Ventilator - PTC Type ( FV-40BD1H )
PTC heater
Integrated muti-functional ventilator
'Alleru-buster filter' equipped
Heater capacity = 2400W
Air volume = 160 m3/h (venitaltion)
FV-40BD1R
Thermo Ventilator - PTC Type ( FV-40BD1R )
PTC heater
Integrated muti-functional ventilator
'Alleru-buster filter' equipped
Heater capacity = 1400W
Air volume = 160 m3/h (ventialtion)
FV-40BD1W
Thermo Ventilator - PTC Type ( FV-40BD1W )
PTC heater
Integrated muti-functional ventilator
'Alleru-buster filter' equipped
Heater capacity = 2400W
Air volume = 160 m3/h (venitaltion)
|
|
|
Kinney KC & KTC Series Multi-stage rotary piston vacuum pumps provide pumping speeds of 5-112 CFM (8-190 m³/h) with ultimate pressures of 0.2 milliTorr (0.027 Pa). Our KTC series vacuum pumps include our exclusive triplex piston design to eliminate vibration.
|
|
|
KINNEY rotary piston vacuum pumps provide vacuum levels to 0.2 milliTorr (0.027 Pa) with long operating life. Our triplex piston designs are inherently balanced to eliminate vibration.
|
|
|
Kinney Rotary Vane vacuum pumps provide an economical vacuum source for those applications where the process is relatively clean or filtered. Gas ballast valves for vapor handling applications are included as standard equipment.
|
|
|
Kinney SDV Dry Screw vacuum pumps operate without any sealing liquid in the pumping chamber. Without metal-to-metal contact inside the pumping chamber, wear is greatly reduced.
|
|
|
Tuthill Vacuum & Blower Systems supplies its own proprietary lines of lubricants for blowers and vacuum pumps, to keep your blowers and vacuum pumps in top running condition.
|
|
Maag Pump Systems gear pumps are displacement pumps for high pressure environments. Their performance and long lifespan increase the efficiency of your manufacturing plant. They are used in diverse processes as feed, reactor discharge and booster pumps for low and high-viscosity applications.
The new extrex® 70-5 HV gear pump has a maximum ∆p of 200 bar and a 25% higher specific volume due to its wider gear design. The new extrex® gear pump is also available in models such as HP for ∆p up to 400 bar, RB for rubber processing, and the standard GP for regular extrusion process applications.
|
|
|
Maag Pump Systems gear pumps are displacement pumps for high pressure environments. Their performance and long lifespan increase the efficiency of your manufacturing plant. They are used in diverse processes as feed, reactor discharge and booster pumps for low and high-viscosity applications.
|
|
Maag Pump Systems Textron builds its gear pumps to a modular design that adapts easily to customers’ requirements and industrial standards.
Housings are available in iron, steel or stainless steel, with or without heating jackets. Bearings, shafts and gears offer a similarly wide choice of materials and configurations.
Five classes of axial clearance and eight classes of radial clearance, coupled with Maag’s expertise in simulation, allow individual pumps to be specified for the highest possible efficiency. A wide choice of seals ensures safety in demanding applications.
|
|
With their constant processing design, CSC type continuous screen changers are able to meet the most stringent quality requirements for melt filtration. The type HSC, FSC and DSC discontinuous screen changers are a simple, robust, and affordable alternative for applications where a short interruption in the melt flow is possible for making screen changes.
The DV continuous divert and dump valve was developed specifically to meet the requirements of underwater pelletizing. It features a unique design that provides bump-less changeovers and eliminates the possibility of a deadhead condition.
|
|
|
|
see the results for the following category : 
