|
|
|
PARTNER PM equipped with special gripping tools, is particularly suitable to manually handle, in a weightless condition, center and off-set loads in any direction. Thus enables the operator to work quickly, with precision and without fatigue, in excellent ergonomic and safety conditions. Its versatile structure also allows to fit in any working environment.
|
|
Dalmec offer a wide range of equipment for the “weightless” handling of sheets, various panels, panels of glass etc.
Simple to use, they allow the operator to move the sheets around quickly, accurately and safely.
These manipulators are custom-built and the type, design, dimensions and picking system used is specially adapted to suit the specific requirements of the user and the various environmental conditions available.
|
|
Dalmec offers a range of tooling heads for the “weightless” handling of electrical household appliances.
Simple to use, they allow the operator to move the electrical household appliances quickly, accurately and safely throughout the working area.
These manipulators have been custom-built, with specially adapted design, dimensions and picking systems to suit the specific requirements of the users and the various environmental conditions available.
|
|
To analyze the requirement of the customer and to link it with the experiment matured during many years it is essential to decide which technical solution will be the key of success of the project
To direct itself towards a solution with rigid arms means to make it possible to the customer to reach high performances of precision on great ranges or complex movements of the product by guaranteeing a perfect stability throughout all operating cycle.
The flexible solutions exaltent the lightness and the speed of the movements, while making the solution essential for the fast and repetitive operating cycles.
The choice of a solution with rigid arms or a flexible solution is the objective of FAMATEC to satisfy the Customer by providing him the solution most appropriate to its requirements.
|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
Pneumatic arm manipulators for all types of handling, “weightless”, which allows the minimum effort for the operator for different kinds of parts.
Max capacity 600 kg
Max work radius 3,7 m
On customer request the following can be supplied:
· Fork liftable self bearing base
· Push or powered trolley for suspended execution
· Special handling attachments: mechanical, pneumatic, vacuum o magnetic operated
· Manual or pneumatic rotating or tilting devices
· Rails systems, complete with metal supporting frame, delivered as a turn key project
|
|
Pneumatic rope balancers for all types of handling, “weightless”, which allows the minimum effort for the operator for different kinds of parts.
Max capacity 75 kg
Max work radius 3 m
Rotation 360°
On customer request the following can be supplied:
· Fork liftable self bearing base
· Push or powered trolley for suspended execution
· Special handling attachments: mechanical, pneumatic, vacuum o magnetic operated
· Manual or pneumatic rotating or tilting devices
· Jib cranes or light crane bridge or monorails systems, complete with metal supporting frame, delivered as a turn key project
|
|
Pneumatic rope balancer with special double fork handling attachment, with adjustable width, provided with mechanical locking of the handled part. Properly designed to handle metallic and/or plastic boxes and cases.
Available also in version with rotating device for the emptying of the contents.
Max capacity 80 kg.
|
|
Pneumatic rope balancer with pneumatically operated permanent magnet handling attachment. Particularly indicated for handling of steel part having both flat or round surface. Safety device allowing the automatic connection of the load balancing function only if the part is gripped.
Max capacity 80 kg.
Also suitable in execution for manipulator with capacities up to 250 kg or more, to be used also with tilting or turning devices.
|
|
Pneumatic manipulating model Standard with tool of taken to magnet
Description
The standard solutions allow to head at the certainty of the repetitive and optimized solution as from the numerous solutions supplied on similar demands. FAMATEC Standard offers to perfectly definable times of delivery and a precise definition of the technical aspects in phase of offer.
Technical details
In the event specific draft of a manipulating to snodati rigid arms equipped of vertical movement of raising to double rope. The solution can be used for the movimentazione of all those products that can be raised through a magnet (in the event illustrated windings).
The product can be raised and moved on the horizontal plane in every point inside of the workspace.
The illustrated solution is mounted on a fixed column but it can be had also in the configurations to column, on autostabile base, hanging and flowing (also with system to bridge-laying tank).
Capacity 200 kg
Range 2500
|
|
|
|
|
|
Loader seeds automatic rifle for sticks of paper for the line of feeding of a rotating one of press.
Semi-automatic loader for sticks of paper FOR the line of feeding of a rotating one of press.
It is equipped of a system of taken to pneumatic clamp opportunely sagomata and determine the proportions, joined to a balancing system automatic rifle of the cargo installed on an articulate arm or the flowing ways of race to carroponte.
It is used with nature acting on the commando console who is studied in order to guarantee ergonomics and operating rapidity; 4 sticks are loaded medium with paper to the minute.
The taken clamp of is constituted from two thin ganasce sagomate flowing ones for the taken one on the short side of the packages of paper; the wide faying surface of the ganasce avoids that the ream of paper is damaged on the flanks for effect of the serration force.
The commando console is Friendly, with prati push-buttons to us of dual-control for the drive of the clamp avoiding crushings or traumi to the limbs.
The balancing body of the machine works to compressed air 7 bars (0,7 mPa), is of highest reliability and duration in the time.
It can be installed in three various configurations:
on a double mounted articulate arm on a fixed column
on a double mounted articulate arm on a fixed column to a autostabile platform
on aerial flowing track on axis X or to carroponte on the aces X and Y.
It works to single compressed air, is marchiato CE and it is not subject to the safety controls of the raising systems.
|
|
StanleyAssembly Technologies offers vertical balancers, torque tubes and articulating arm systems that balance loads to 277 kg (610 lb) and absorb torque reaction to 1,350 Nm (1000 ft lb). Optional tool holders, end effectors and interfaces enhance movement and orientation for specific applications.
Custom engineered solutions can have higher capacities (to 5,000 Nm) and the capability to integrate arms and balancers with tooling such as multiple-spindle nutrunners. With more than 40 years of experience, Stanley engineers are experts in evaluating customer needs and converting them into solutions that improve the productivity, ergonomics and quality of your manufacturing operations.
|
|
Koike Aronson / Ransome Universal Balance Positioners allow quick and safe manipulation of large awkward work objects, which is critical in maintaining the most efficient down hand welding position. A welder can position objects of up to 4000 pounds by simply applying fingertip pressure and does not need to raise their helmet or break an arc.
The Universal Balance principle is to intersect the rotational axis center of gravity with that of the tilt axis. Work pieces can then be rotated 360? around both axes and, in most cases, around the positioner column. Special engineered positioners are always available.
|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
|
Manipulating ATISmirus 100 with tool to ventose for the movimentazione of scato them in cardboard. The job cycle previews the disattivazione of the parking brakes acting on the appropriate selector. The tool to ventose comes posizionato from the operator on the product to enliven place on the packing emplacement the taken operation of of the product comes executed from the operator acting on the appropriate push-button of taken predisposed on the tool. Caught up a prestabilito value of empty that it assures abundant emergency, the insertion will be had automatic rifle of the balance to cargo. The operator can enliven therefore the cargo easily acting directly on the grip or the product. The release of the product on pallet is obtained pressing the two push-buttons at the same time affixed to you with consequent restoration in automatic rifle of the balance to empty.
|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
|
With Stanley’s new iTrolley for enclosed and patented track rail systems, moving loads with large unwieldy bridge cranes is now possible with greater speed and precision than ever before. The system masks the momentum and inertia of the overhead crane, greatly reducing the starting-and-stopping strain that causes most operators to abandon the equipment and perform the task manually.
|
|
Pneumatic parallelogram manipulator Z-Arm
Z-Arm units can be used in the following combinations:
- as mounted on a pillar
- as suspended travelling units
- as suspended stationary units
|
|
Pneumatic parallelogram manipulator Z-Arm
Z-Arm units can be used in the following combinations:
- as mounted on a pillar
- as suspended travelling units
- as suspended stationary units
|
|
Pneumatic parallelogram manipulator Z-Arm
Z-Arm units can be used in the following combinations:
- as mounted on a pillar
- as suspended travelling units
- as suspended stationary units
|
|
| ... products without technical information |
| |
|
|