|
|
Portable vibration measuring device for checking the vibrations caused by the tool, toolholder and spindle assembly with local correction of the unbalance.
The device is a carry-on unit which can be used to balance any rotating body – such as grinding wheels, pulleys, fans, rotors, etc. –in the workshop.
Features:
- Measures vibrations and unbalance.
- Availability of different unbalance correction methods.
- User-friendly, step by step driven unbalance procedure.
- Connectable to the bench unit BEST BALANCE 2000 Plus thus obtaining a complete manual tool and toolholder balancing machine.
- Rugged and ease to use
Advantages:
Helps to keep the vibrations within preset limits achieving:
- Longer tool life
- Better surface finishing
- Longer life of the spindle and bearings of the spindle
- Noise reduction
- Breakages prevention
|
|
Features
- One or two planes balancing procedures developed according to the specifications of the toolholders suppliers.
- Balancing tolerances in accordance with the ISO 1940 specifications. - ISO Quality Grades: G1, G2.5, G6.3, and G16.
- User friendly PC-based operator’s graphic interface.
- Geometric and mass data of the toolholders inputted by the operator or self-acquired by the unit in learning mode.
Benefits
- Faster cutting speed for tools.
- Extended tool life.
- Prevention of spindle failure.
- Consistent production quality.
- Safe and silent operation.
- Easy integration in any networked productive architecture.
|
|
Features:
- Suitable for ISO, HSK, CAT, BT cones.
- Resolution: 0.1 g·mm
- Selection of the ISO balancing class together with the maximum permitted RPM
- User-friendly, step by step driven unbalance procedure.
- Rugged, ease to install and to use
Advantages:
- High Speed Machining (HSC)
- Better surface finishing.
- Longer life of the spindle and bearings of the spindle.
- Safe and silent operation.
- Wear and breakage prevention
|
|
|
|
|
|
Features:
Multifunction and modular:
- Automatic wheel balancing on 1 or 2 planes.
- Manual pre-balance of wheel.
- Detection of the touch between wheel-workpiece and wheel-dresser.
- Pre, in and post-process size measurement.
Menu programmable.
Operator panel:
- Local or remote graphic display, equipped with RS232 interface for hard copy function.
- HMI Windows software package for PC-CNC terminal.
Interfaces:
- RS 232 serial interface for remote programming and data up/download.
- Programmable parallel interface for remote programming, data up/download and digital I/O expansion.
- Profibus DP
- Analogue interfaces for measurement signals.
Opto-insulated and protected digital interface
Analogue signals galvanically insulated
FFT vibrations analysis.
Programmable measurement data acquisitions and recording.
Advantages:
Meets all the applications suitable to:
-increase productivity
-ensure product quality
Protection of the investment.
Cost/performing in any application.
Easy integration in any production architecture.
Remote Assistance through tele-service.
Reliable in workshops.
Reduction of machine downtime thanks to failure prevention and diagnostic.
Allows Statistical Process Control.
|
|
Features:
Available in the following versions:
- Rack, half rack
- Shelf
- Remote panel
Digital I/O for the connection to the CNC
Unbalance measuring range from 0 to 200 µm
Maximum resolution 0.001 µm
2 balancing limits, each settable from 0.001 to 1 µm
Panel with waterproof keyboard.
Suitable for internal or external balancers with brush or no-contact collectors.
Advantages:
Price competitiveness.
Reliable in workshops.
Enhance the quality of the product.
Increase the productivity.
Suitable as a standalone unit or integrated in the CNC of the grinding machine.
|
|
Features:
Compact dimensions
High measuring precision.
High balancing precision.
Quick return of investment
Easy to use.
Advantages:
Highly skilled operator not required.
Quick return on investment.
High level of reliability.
|
|
Model STMS
The Model STMS is a fully automatic
multi-station production balancing machine,
capable of accomodating various part
types such as stators, dampers, flanges,
drums, input housing shafts, and many
others.
Features:
- Automatic part transfer system.
- Configurable for a wide range of part
types and sizes.
- Available unbalance correction systems
(part type dependent) include:
- Automatic fixed or variable depth drilling.
- Automatic milling.
- Automatic strip feed, cutoff and welding of variable
length weights.
- CBI-2000 controlled servos and measurement/correction
process.
- Standard pneumatic and hydraulic controls.
- HMI (Human Machine Interface) operator control
screens replace pushbutton/pilot light panel.
- High capacity chip collection vacuum.
- Production rates typically exceed 100 parts/hour.
- Machine dimensions.
150" W. x 70" D. x 108" H
|
|
|
|
|
|
Model STR
The Model STR Single-Station Static Rotating
Balancer is a completely stand-alone production machine, capable of accomodating various part types such as stators, dampers, flanges, drums, input housing shafts, and many others. It combines unbalance measurement, correction and recheck in the same part fixture.
Features:
- Automatic part transfer system (manual load for audit configuration).
- Configurable for a wide range of part types and sizes.
- Available unbalance correction systems (part type dependent) include:
- Automatic fixed or variable depth drilling.
- Automatic strip feed, cutoff and welding of variable length weights.
- CBI-2000 controlled servos and measurement/correction process.
- Standard pneumatic and hydraulic controls.
- High capacity chip collection vacuum.
- Cycle time (manual load, 2-correction pass) is approx. 21-28 seconds.
- Machine dimensions: 97"W. x 84"D. x 100"H.
- Optional HMI (Human Machine Interface)
perator control screens replace
pushbutton/pilot light panel.
|
|
Model HD
The Model HD Axle / Differential Balancer
is a semiautomatic dual plane horizontal machine. It is designed to measure and
correct unbalance in axle and propshaft assemblies for automotive and light truck applications.
It combines both drilling and welding
correction methods on one machine.
Features:
- Fully automatic measurement and
correction sequence (manual load and
unload)
- Configurable for a wide range of part
types and sizes
- Available unbalance correction systems
(part type dependent) include:
- Automatic fixed or variable depth drilling
- Resistance welding using pneumatically activated "C"-type guns arranged for projection welding of pre-formed slugs
- CBI-2000 controlled servos and measurement/correction process
- High capacity chip vacuum
- Full perimeter guarding and workpiece containment
- Optional HMI (Human Machine Interface) operator control screens replace pushbutton/pilot light panel
|
|
Model PRT
The Model PRT Propshaft
Balancer is a single station semi-
automatic horizontal machine
designed to measure and correct
unbalance in automotive and
light truck propshaft/driveshaft
assemblies.
Features:
- Dynamic 2, 3 or 4 plane balancing.
- Supports a wide range of part sizes and weights.
- Part rotation speeds up to 6000 RPM.
- Two-speed balancing for obtaining a high speed
audit measurement.
- Available unbalance correction systems include:
- Automatic strip feed cutoff and welding of variable
length weights.
- Semi-automatic welding of fixed weights (automatic
index, manual welding).
- Dual servo motors control part rotation for greater
stability at higher RPM speeds.
- CBI-2000 controlled servos and measurement/correction process.
- Standard pneumatic and hydraulic controls.
- Interlocked protective guarding on both the workpiece
and the machine for operator safety.
- Optional Part Marking available
|
|
Model STR
The Model STR Torque Converter Balancer is a unique machine in our STR product line. It is designed to measure and correct the residual part unbalance in fully assembled torque converters.
Features:
- Independent servo-driven upper and lower spindles.
- Dynamic unbalance measurement via exclusive measure-index-measure method.
- Unbalance correction via automatic strip feed, cutoff and welding of variable length weights onto converter housing.
- Loadable by hand, gantry or robot cell integration.
- CBI-2000 controlled servos and measurement/correction process.
- Standard pneumatic and hydraulic controls.
- Full perimeter guarding.
- Typical production rate of 60 parts/hr or greater.
|
|
| ... products without technical information |
| |
Portable vibration measuring device for checking the vibrations caused by the tool, toolholder and spindle assembly with local correction of the unbalance.
The device is a carry-on unit which can be used to balance any rotating body – such as grinding wheels, pulleys, fans, rotors, etc. –in the workshop.
Features:
- Measures vibrations and unbalance.
- Availability of different unbalance correction methods.
- User-friendly, step by step driven unbalance procedure.
- Connectable to the bench unit BEST BALANCE 2000 Plus thus obtaining a complete manual tool and toolholder balancing machine.
- Rugged and ease to use
Advantages:
Helps to keep the vibrations within preset limits achieving:
- Longer tool life
- Better surface finishing
- Longer life of the spindle and bearings of the spindle
- Noise reduction
- Breakages prevention
|
|
| ... products without technical information |
| |
Portable vibration measuring device for checking the vibrations caused by the tool, toolholder and spindle assembly with local correction of the unbalance.
The device is a carry-on unit which can be used to balance any rotating body – such as grinding wheels, pulleys, fans, rotors, etc. –in the workshop.
Features:
- Measures vibrations and unbalance.
- Availability of different unbalance correction methods.
- User-friendly, step by step driven unbalance procedure.
- Connectable to the bench unit BEST BALANCE 2000 Plus thus obtaining a complete manual tool and toolholder balancing machine.
- Rugged and ease to use
Advantages:
Helps to keep the vibrations within preset limits achieving:
- Longer tool life
- Better surface finishing
- Longer life of the spindle and bearings of the spindle
- Noise reduction
- Breakages prevention
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
|
|
RON 2150 Dynamometer is a unique combination of the smallest and lightest load cell with a very large display.
The small and light load cell ensures portability and low headroom loss for any application. The large display ensures readability from a considerable distance.
RON 2150 also offers two systems in one: the removable display enables the user either to hold the large indicator in his hand or snap it very easily onto the load cell. By this means, the user's personal safety is ensured as under no circumstances will he have to approach the load in order to read the result: he will either hold the remote indicator in his hand or read the large display from a safe distance.
The separation of load cell and display also increases the system's durability.
The load cell's unique perpendicular hole structure neutralizes external moments and thus improves safety and accuracy.
RON Crane Scale and cable Dynamometer series are used for weighing during lifting, overload prevention, force, load and tension measurement and cable and wire tension monitoring and control.
Cable Dynamometers are often used by electricity and communication companies for cable and wire tension monitoring and control. RON systems low weight ensures their portability and makes them especially suitable for these applications.
A marine version of the RON 2150 Shackle Type is also available for offshore applications.
All Crane Scales and Cable Dynamometers are factory-tested and supplied with a test certificate, including a fully traceable calibration chart.
|
|
|
|
|
|
RON 2000 Shackle Type is the smallest and lightest portable Dynamometer.
RON 2000 portable Dynamometer is a basic, easy-to-operate and very reliable tension load meter. Digital dynamometers are used for weighing, force, tension, load measuring and load control.
RON 2000 digital dynamometer has a miniature load cell which ensures portability and minimum headroom loss for any application.
The load cell's unique perpendicular hole structure neutralizes external moments and thus improves safety and accuracy.
RON 2000's indicator is separated from the load cell and is held by the user. This separation ensures the user's safety since under no circumstances will he have to approach the load in order to read the result. This separation also guarantees the durability of the portable Dynamometer.
RON Crane Scales and portable Dynamometers are used for weighing during lifting, overload prevention, load measuring, load control and load monitoring.
All RON Crane Scales and portable Dynamometers are factory-tested and supplied with a test certificate, including a fully traceable calibration chart.
|
|
|
|
|
|
RON portable digital scales include the Crane Scale, Dynamometer Load Cell and Overload Detector series.
The low headroom RON 1000 Standard Type Overload Detector is designed to be installed on the dead end or can be used between the hoist and its trolley.
RON 1000 Standard Type is a low headroom, electromechanical Overload Detector, used for overload monitoring. It may be configured to trigger any desired electrical alarm supplied by the customer, including stopping the lift when an unsafe overload condition occurs, for overload detection and prevention.
Overload during lifting: Hoist or crane overload is dangerous and can cause accidents. Overload monitoring is important for prevention of crane overload.
The devices are supplied factory-calibrated and ready for installation. Available in a wide variety of capacities, the RON 1000 can be supplied in capacities ranging from 500 lbs (250 kgs) to 20,000 lbs (10,000 kgs). Each unit is initially adjusted to give the user an overload indication at 105% of rated capacity. Additional detection point is optional.
RON portable digital scales: Crane Scale, Dynamometer and Overload Detector series are factory-tested and supplied with a test certificate, including a fully traceable calibration chart.
|
|
|
PneumaticScaleAngelus is the leading supplier of Can Seamers and Can Closing machines. We have authorized agents worldwide, with facilities in the United States, Belgium and England. We are a recognized leader in the design, production and maintenance of high speed can seaming equipment. Our machines are used by leading Food, Beverage, Non-Food and Can Manufacturing facilities around the world.
|
|
Our product line consists of proven technology including PneumaticScaleAngelus' Pneumacapper and Consolidated Capem Cappers. We also offer a wide variety of sorters to accommodate any size and shape.
-Proven technology from PneumaticScaleAngelus including Consolidated's Capem Cappers
-Reliable, minimal-maintenance, highly versatile capping solutions from the industry leader in packaging automation
-Widest range of cap and containers with maximum speeds of 750 CPM
-Superior customer service and technical support
|
|
| ... products without technical information |
| |
|
|
|
|
|
VM20 is a modular, multipurpose measuring and test system for grinding machines easily programmable by the user. Available as independent unit or for rack-mounting, equipped with local hardware or remote operator panel as well as with Windows Software panel, digital I/O logic interfaces, Profibus and RS232. The wide range of grinding wheels balancing devices, with or without embedded acoustic sensors, applicable on single or multiple grinding wheels or long grinding wheels, allow to automatically and rapidly reduce vibrations which generally cause errors and imperfections on worked surfaces. The wide range of AE transducers configuration available, with assembly both on rotating and stationary machine components, can be used to monitor the machine conditions, through FFT analysis, and to determine the grinding wheel position when it contacts the piece to be worked or the tool-dresser. During working, diameter and roundness gauges, as well as the pieces positioning gauges, allow to achieve a constant production quality together with a cycle time improvement, thanks to correct feeding speeds for roughing-out and finishing.
|
|
|
|
see the results for the following category : 
