|
|
Spindle bearings are single row angular contact ball bearings comprising solid inner and outer rings and ball and cage assemblies with solid window cages. They cannot be dismantled. The bearings are available in open and sealed versions.
Spindle bearings have restricted tolerances. They are particularly suitable for bearing arrangements with very high requirements for guidance accuracy and speed capacity. They have proved highly suitable for the bearing arrangements of spindles in machine tools.
|
|
- sizes per Type Series 719, 70 (718 per agreem.)
- installlation-ready, preloaded universal bearings with fibre cage, and 21º contact angle, optimised for high speed and axial stiffness;
- Precision ABEC 7... 9... HQ
- single row 719/70 USS...
- double row 719/70 USO... (in face-to-face/"DB"-configuration)
|
|
Here's a low profile, large bore bearing that's destined to change your thinking about robotics, inspection equipment, satellites, cameras and similar applications where precise positioning and lightweight designs are critical.
At just 2.5mm wide, ULTRA-SLIM® bearings are available in bore sizes ranging from 35mm to 170mm for an array of applications requiring compact motion control design components.
Precision-engineered ULTRA-SLIM® bearings are made of stainless steel for corrosion resistance. Hybrid versions with ceramic balls are available upon request. ULTRA-SLIM® bearings are available in angular contact (Type A) radial contact (Type C), and four-point contact (Type X) styles.
|
|
|
|
|
|
Our ability to work in close partnership with our customers to replace traditional steel bearings with custom-designed plastic cost reducing solutions is what truly sets BNL apart from other bearing manufacturers.
The company has been at the cutting edge of plastic bearing design and technology for over 30 years, building an expertise that is unrivalled in this niche market.
The specialist design expertise of our dedicated in-house design team enables us to achieve the best and most cost-effective solutions for all of our customers.
Carefully considering the functional requirements of the application from the outset, we work closely with the customer's own design engineers to produce a single piece, rolling element bearing assembly with additional integrated features such as axles, precision gears, fixing clips, mounting flanges and pulleys. Forming fully integrated assemblies, these additional features maximise the part's functionality and deliver whole system cost reductions to the customer through a significantly reduced parts count and assembly time.
|
|
|
Deepgrooveballbearing are particularly versatile.They are simple in design, non-separable,suitable for high and even very high speeds and are robust in operation,requiring little maintenance.Deep raceway grooves and the close conformity between the raceway grooves and the ball enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads,even at high speeds.Single row deep groove ball bearings are the most widely used bearing type.
|
|
BNL now offers a range of higher performance miniature plastic bearings designed to directly replace steel bearings in many demanding long-life light-load applications.
Produced to meet the demanding performance needs of business machines, office equipment and other light duty mechanical applications. Already approved and supplied to the leading OEM manufacturers worldwide.
|
|
|
The self-aligning ball bearing has two rows of balls and a common concave sphered raceway in the outer ring. The bearing is consequently self-aligning and insensitive to angular misalignmengts of the shaft relative to the housing. It is particular suitable for applications where considerable shaft deflections or misalignment are to be expected.additionally,the self-aligning ball bearing has the lowest friction of all rolling bearings,which enables it to run cooler even at high speeds.
|
|
deep groove ball bearings
CAGES:
As to cages, waved pressed steel cages are most common, sometimes turning firmed steel cages and polyamide resin cages are also used.
APPLICATIONS:
Gear box, apparatus instrument, magnetos,elecrical motor,household electrical appliance, gas engine, vehicle, agriculture equipment, engineering machine, ect.
MAINLY TYPE:
Open type, one shield in one side, two shields in both sides, one skeleton rubber seals(contact/non-contact) in one side,two skeleton rubber seals (contact/non-contact) in both sides, with snap ring groove in O.R. and two shields in both sides, with snap ring groove in O.R. and one shields in opposite sides.
|
|
Deep groove ball bearings are the most popular type of ball bearing, they are widely used in a variety of industries. As a result they are available in many sizes with many variations. Deep groove ball bearings are simple in design, suitable for high speeds, non-separable and are able to accommodate axial loads in both directions as well as radial loads.
Deep-groove bearings are durable in operation and easy to maintain. RSM deep groove ball bearings are designed to deliver optimum value and reliability.
|
|
Axial angular contact ball bearings, for screw mounting
The complete units are consisted of a single-piece outer ring, a two-piece inner ring, balls, cage assemblies and seals.
Bearings are double direction angular contact ball bearings with a 60° contact angle in an O arrangement.
can support axial loads from both directions as well as radial loads.
are preloaded after assembly by a precision locknut.
are protected from contamination by lip seals or gap seals.
are greased with a lithium complex soap base grease to SHELL Alvania RL3.
can be relubricated.
are suitable for operating temperatures from -30°C to +120°C (limited by the grease, sealing ring material and the plastic ball cages).
are precision bearings e.g. for use with screw drives.
outer ring is suitable for flange mounting.
lip seals or gap seals on both sides.
|
|
Gamet Bearings has been manufacturing ultra precision bearings since the early 1950’s.
Originally founded to provide products for the machine tool industry, Gamet has expanded its range into many other industry sectors where the highest level of precision is required. Precision ball screw support bearings, cartridges and blocks are also made to meet the ever increasing demands for accuracy placed on linear movement and positioning.
Plain Cup Bearing
Flanged Cup Bearing (C Type)
Constant pre-load Bearing (P type)
Plain Cup (G type) Bearing
Flanged Cup Bearing (H type)
|
|
|
|
|
|
Ball Bearings
Ball bearings are machinery components, which comprise an outer ring, inner ring, balls, retainers, shields and snap rings. Miniature bearings and small-sized ball bearings have up to 30mm in external diameter. Essential to high-precision rotary components, ball bearings determine rotational accuracy.
Bearing types include Radial Ball Bearings (Deep Groove and Angular Contact) and Thrust Ball Bearings. Radial bearings are designed to carry both radial and axial (thrust) loads, while thrust bearings are designed for pure thrust loads only. Many different configurations are available for ball bearings.
Miniature Bearings
Our miniature bearings range in sizes from .1181 to 1.000 inch O.D. (3mm to 26mm), and are available in inch and metric sizes.
Miniature bearings and instrument bearings are single row bearings. The construction of these miniature bearings enables them to carry moderate radial and thrust loads at low operating torque while providing high performance within a small envelope design. Miniature bearings and instrument bearings are typically available in both stainless steel for those applications requiring corrosion resistance and chrome for maximum fatigue life.
Minebea manufactures more than 8,500 different types of miniature and small-sized bearings, most of which have external diameters of 22mm or less.
|
|
Key Specifications/Special Features:
-7000-7040, 7200-7240, 7301-7330, with suffix "C", "AC" and "B" -Quality can reach ABEC-7 (P4), with high speed application -Technical capability:
Accuracy: tolerance from ISO P0-P4 (US ABEC-1---ABEC-7) Low noise: z1--z4 at accelerated velocity value and zv1--zv4 at velocity value
Application: High precision , High speed, High temperature, for
spindles of machine tools,etc.
Working life: according to ISO standard
Primary Competitive Advantages:
-Good life performance
-Quality Approvals
-Customer' s Drawings Accepted
|
|
|
|
|
|
Single row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. The raceways of the inner and outer rings are offset in relation to each other in the direction of the bearing axis. The bearings are available in open and sealed versions. Their self-alignment capacity is very small.
Many sizes of angular contact ball bearings are supplied in X-life design. These bearings are indicated in the dimension tables. Bearings of X-life quality have an improved raceway geometry as well as optimised surfaces. This gives a significant increase in the fatigue limit load of the bearings. In calculation of the expanded adjusted rating life, values up to 50% higher are achieved. In certain applications, a smaller design of bearing arrangement can therefore be used if necessary.
Double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. They correspond in design to single row angular contact ball bearings in pairs in an O arrangement but give a narrower design than these. They differ in the size of their contact angle and the design of the bearing rings.
|
|
|
Angular contact ball bearings can stand a combined radial and axial load simultaneously. Its axial load carrying capacity increases with respect to the bearing's contact angle. The contact angle (å) is defined as the angle between the line contacting the raceway and ball. The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle.
|
|
NSK manufactures a complete range of metric single row angular contact bearings from 10mm to 775mm bore diameter. The standard contact angles available are 15, 25, 30 or 40 degrees. A range of inch sizes is also available with a standard 20 degree contact angle.
These bearings are capable of supporting radial loads and axial load in one direction. The larger the contact angle, the higher the axial load carrying capacity. For high-speed operation, however, smaller contact angles are preferred.
Normally these bearings are used in duplex pairs in order to support axial loads in either direction. They can be supplied paired back-to-back or face-to-face with known preloads or clearances built-in. They can also be supplied paired in tandem to accept exceptionally heavy axial loads in one direction.
The most popular contact angle for industrial bearings is 40 degrees and these can be supplied with different cage materials including steel, brass or polyamide.
|
|
Angular contact ball bearing, suitable for high-speed and high-precision rotation, is mainly used in the principal shaft in machine tools, HF motor, gas turbine, oil pump, air compresser, printing machine, etc.
Main specifications of ZQZ bearings include 71900, 7000, 7200, 7300 and 7400.
|
|
|
Double direction axial angular contact ball bearings are non self-retaining precision bearings with restricted tolerances to class SP. They comprise solid shaft locating washers, spacer rings, housing locating washers and ball and cage assemblies with solid brass cages. The parts of the bearings are matched to each other and can be fitted independently of each other; they must not be interchanged with those of bearings of the same size.
|
|
|
Angular contact ball bearing run in higher limited rotation speed, can take radial load and axial load at the same time, and also can only take the pure axial load. The axial load carrying capacity of angular contact ball bearings increase with the increase of contact angle.
|
|
|
GWG produce large diameter angular contact ball bearing. In addition to standard items,GWG can make non-standard and custom beairngs with shorter lead time than expected.For more information,please view our homepage www.gwgbearings.com
|
|
SNFA's prime objective has always been to reach the highest levels of specialisation in the design, development and manufacture of precision bearings. The various series illustrated in this catalogue differ by configuration and size. They consist of bearings ranging in size from a minimum of 6 mm diameter bore to a maximum of 380 mm outer diameter.
Development has always been in line with international standards, as there is a need to safeguard interchangeability. Bearing specifications are therefore classed in accordance with such standards.
|
|
Angular contact ball bearings are available in single row and double row configurations.
- Able to accommodate both radial and thrust loads
- Suitable for high speed operation
- Open and sealed versions available
- Highly rigid
- Standard: DIN 616, DIN 628
- Series: single row: 7200, 7300, double row: 3200, 3300, 5200, 5300
- Application examples: reduction gearboxes, agricultural machinery, pumps, etc.
|
|
in dimension series:
7203B.. up to 7234B..
7303B.. up to 7334B..
contact angle: 40°
cage design: Glass-fibre reinforced polyamide 66, available also cages of brass (starting bore reference number 21 - standard design), sheet steel resp. sheet brass
bearings are machined to normal tolerances according to standard of SLF, tolerance classes P6, P5 or P4 are available on request
besides of normal design universal designs are also available according to standard, e.g. UO, UA
angular contact ball bearings may be ordered as a bearing set in various arrangements (e.g. O-, X-, T-, TOT- or similar)
|
|
Angular contact ball bearings can stand a combined radial and axial load simultaneously. Its axial load carrying capacity increases with respect to the bearing's contact angle. The contact angle (∝) is defined as the angle between the line contacting the raceway and ball.
The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle. There are a wide variety of designs and sizes, those commonly used and included in our catalog are:
* Single row angular contact ball bearings
* Double row angular contact ball bearings
|
|
Axial deep groove ball bearings comprise shaft locating washers, housing locating washers and ball and cage assemblies. The bearings are not self-retaining; the ball and cage assembly and bearing washers can therefore be fitted independently of each other.
In addition to series with flat washers, there are also series with spherical housing locating washers for compensation of static misalignment. These designs are normally used in comjunction with support washers. Axial deep groove ball bearings are available in single and double direction designs.
Both designs can support high axial forces but must not be subjected to radial loads.
|
|
|
|
|
|
Bearings of this type consist of the washers with raceways and an assembly of ball and cage. The washer that contacts the shaft is called the shaft washer, and the one attached to the housing is called the housing washer. Thrust ball bearings are designed to accommodate thrust loads at moderate speeds, for practical purposes their radial load capacity is nil. The mounting is relatively simple as the washers and the ball and cage assembly can be mounted separately as Thrust ball bearings are separable.
Bearings with a sphered housing washer can be used together with a sphered seating washer to compensate for misalignment between the support surface in the housing and the shaft as it’s important to keep the thrust bearings square with the shaft. However, the ability of the self-aligning seat to follow shaft wobble or misalignments is still quite limited.
Double direction thrust ball bearings characteristics are identical to those of the one-directional bearing, except it can accommodate axial loads acting in both directions and can thus serve to axially locate a shaft in both directions. To prevent adverse influence of centrifugal forces and gyration moments the single and double direction thrust ball bearings must be constantly subjected to a specific minimum load.
|
|
Thrust ball bearing is a separable type of bearing, with axial loading capacity and relatively low limit speed. ZQZ produces thrust ball bearings of single-row, double-row and four-row.
Main specifications of ZQZ bearings include:
Single-row: 511, 512, 513, 514.
Two-way: 522, 523, 533.
With spherical seating washer: 532, 533, 534.
With two-way seating washer: 542, 543, 544.
|
|
|
|
