|
|
| ... products without technical information |
| |
FusionTM II screw. Delivers enhanced mixing while retaining benefits of the original FusionTM screw, namely higher output and lower melt temperature. Applications: injection moulding machine, extrusion and blow molding.
MultiMeltTM injection molding screw. "Universal" screw works with almost any polymer except rigid PVC. Combines productivity benefits of barrier flights for melting with an integrated StrataBlend® II professional mixer for improved color and additive dispersion and temperature homogeneity.
EasyMeltTM injection molding screw. Combines the simplicity and economy of a conventional three-zone screw with the productivity and quality benefits of optimum material feeding, melting and metering.
StrataMeltTM injection molding screw. Resin-optimized single-stage geometry like the EasyMeltTM but with an integrated StrataBlend® II mixer for improved color and additive dispersion and temperature homogeneity.
FusionTM Screw. New-generation barrier screw boosts productivity, lowers melt temperature and improves color/additive dispersion in injection molding, extrusion and blow molding.
EfficientTM Extrusion Screw. Barrier screw for extrusion proven for more than 30 years in the field.
|
|
The AHP screw-in professional cylinder excel on account of their tiny size. When integrated in a tool, it works without a large amount of space being required. With all the quality characteristics of a Merkle cylinder.
- Resinated piston rod, ground and chromed
- State-of-the-art professional seal |
|
New "direct drive" screw press with rotative linear motor
The new screw press that Ficep is proposing in addition to the traditional screw industrial presses with disks control, is characterized by technical innovations which place this machine ahead of the market. |
|
... see all the products in the category
Presses
|
WMB Spirals
Spiral springs are excellent for protecting spindles manufacturers and shafts from chips, dust and liquids, high temperatures and chemical influences. WMB spirals are distinguished by their reliability and performance as well as low maintenance. They have a good sealing function and therefore provide optimum conditions for safe operation of shafts, columns and spindles.
|
|
The helical screw flowmeter is a high precision meter giving excellent reliability. It is mainly used for viscous fluids but will also perform well on low viscosity fluids. The basic range of meters are in aluminium or grey cast iron and stainless steel models are available. Flow rates range from 0.1 l/min to 7,500 l/min.
Suitable for wide ranges of viscosity these meters provide high accuracey measurement (+/-0.1%) for fuel and oil flows particularly for automotive and aviation test rig applications. |
|
The Vrieco-Nauta conical professional mixer is a convective mixer with a high mixing efficiency that treats your product gently and guarantees the highest level of mixing accuracy without any product distortion.
The Vrieco-Nauta conical mixer was developed more than sixty years ago. Since then, many product innovations have followed. The reliability of the design and performance that is known the world over is exhibited in countless installations in a wide variety of applications.
|
|
Clinch studs are inserted through pre-pierced sheets into clinch dies. Initially the hole in the sheet is widened by the calibrating collar. After that, the clinch stud is precentred by means of the calibrating collar. Finally, the sheet material is forced into the annular groove and the Torx locking feature is pressed in. A very high loadcarrying capacity is achieved by means of the patented underhead geometry.
The reduction of production stages and of energy consumption results in considerable cost savings. An additional advantage is the possibility of processing several clinch studs in a single stage. |
|
Features and Benefits:
Bolttech is known for solving the toughest bolting problems found in the industrial world today. These basic practices go into every design and manufacturing detail of our stud tensioning line of tools. We design our tensioners with quality, simplicity and versatility of the specific application and user in mind. Bolttech's Delta Series bolt suppliers tensioners maximize efficiency and minimize size for specific single stud size applications.
- Patented high pressure/low friction professional seals are designed to outlast the competition and provide accuracy within .5% with a calibrated pumping unit.
- Environmentally friendly, using water-filled tensioning systems.
- The direct axial load is applied to the bolt and inaccuracies created through friction are alleviated. |
|
In its standard range of hydraulic tensioners, SKF Equipements offers no less than 6 different types of tensioners with characteristics which are both different and complementary.
The product range includes multi- purpose, powerful, thin, compact and other types of tensioners, covering a wide range of bolt manufacturer dimensions from M8 to M160 (5/16” to 6”), and able to apply pre-tightening loads ranging from 50 kN to 8500 kN.
|
|
HYDRAULIC SUPPLIERS OF BOLT TENSIONING DEVICE
Output 155Kn to 4476Kn, Stroke up to 15mm, Suitable for Bolt Sizes M18 to M115 in various models
|
|
The RotaBolt® range provides you with either finger-tip, visual or remote measurement of tension throughout the life of the bolted joint. They surpass traditional tightening methods such as:
- Hydraulic Tensioners
- Flogging
- Torque Systems
which have severe control limitations and can result in unpredictable bolt tension and joint failure.
RotaBolts are setting new safety standards in a wide variety of sectors where joints are subject to fatigue, vibration, pressure containment and structural slippage.
|
|
| Over the years, Hydratight has developed many solutions for non-standard tensioner applications. A number are based around our existing reliable products, but we also have the ability through our experienced design engineering team to produce bespoke products to solve a wide range of tensioner based bolting applications. |
|
| ... products without technical information |
| |
Features:
- Portable, handheld units
- Battery operated
- High resolution display
- Temperature compensation
- Interchangeable transducers
- Windows software
- Built-in probe zero block allows easy exchange of transducers
- Regression analysis for custom material calibration
- Windows software to download measurements create reports, and upload test parameters
- Direct-to-printer reports |
|
| ... products without technical information |
| |
Profile Connectors specification
_Bolt Connector, Slot 8
_Bolt Connector, Slot 10
_Bolt Connector, Slot 10
_Central Connector, Steel
_Cover Cap for Central Connector, Nylon
_Angle Connector 40, Die-cast Zinc
_Angle Connector 40/80, Die-cast Zinc
_Self Tapping Screw, With Torque
_Connecting Screw, Steel
_Plate Connector, Die-cast Zinc
_Universal Connector, Die-cast Zinc
_Butt Fastening Universal Connector, Die-cast Zinc
_Milling connector profile 30, Steel
_Milling connector profile 40, Steel
_Milling connector profile 45, Steel
_Pin T-Slot Nut, Steel, Slot 8
_Screw Connector, Steel, Slot 5, 6, 8
_Connection Plate 40 x 80, Steel, Profile 40 and up
_Connection Plate 100, Steel |
|
BSS-90, 150, 240 STAINLESS STEEL SPRING LOADED BARREL BOLT
304 Stainless Steel
Stainless Screws included.
Several Sizes available.
Please visit our website for further information. |
|
Adjustable re-treading tool for external male thread forms. No measuring of thread required, as the hardened stell blades will adjust automatically to any thread dia and pitch.
Usable for all kinds of threads, Inch and metric, right hand or left, fine and course. |
|
In some critical bolting applications, factors such as friction or bolt manufacturer/joint geometry are such that the measurement of applied torque alone will not provide the degree of accuracy necessary to control the preload within the required limits. Likewise, many critical applications also demand that bolt preload be monitored over the service life of the professional fastener as part of a predictive or preventative maintenance program. In these applications, ultrasonic measurement of fastener elongation and/or load has frequently proven to be the most accurate, reliable and cost effective solution.
Ultrasonic measurement of bolt preload is made possible by introducing a sonic pulse at one end of the fastener and accurately measuring the time of flight (TOF) required for the echo to return from the opposite end; using material constants, the USM-II converts this TOF into an "ultrasonic length" of the fastener, providing a baseline from which future measurements will be made. When the fastener is tightened, the TOF increases and the USM-II will again utilize material constants to eliminate the effects of stress and temperature variations on sound velocity, providing an accurate elongation or load measurement.
The USM-II uses state of the art hardware and professional software to achieve these measurements with maximum automation, and minimizes the need for operator interpretation. Offering digital recordation and transmission of data, as well as calibrated analog signal output the USM-II provides a complete system for measurement, recordation, and control of fastener tension in the most demanding applications. |
|
SUPPLIERS OF BOLT LOCK with one key slot to block a sector.
Lock with bolt (diameter 10 or 15) designed to easily loosen a contact block associated with the manipulation of the lock bolt.
Mechanical blocking of industrial circuit breaker, fused sectioning devices, cock, commands …
Associated with a contact permits blocking of control circuits.
Coding is done in the body of the lock.
STI provides key number management by site (please contact us).
Related with an access lock, the version of this device without a contact does not need any wiring (key transference)
Compact lock (without barrel): the key directly moves the bolt drive.
Positive Safety: Opening of the contacts related to the movement of the bolt (key liberation which moves the bolt)
Function: Key free – bolt out / key held – bolt inside. Safety contacts permit blocking of the control circuit and/or resending information, a signal, …
|
|
|
|
