|
|
|
|
|
|
High Strength Zinc Alloy Model BL
This model’s holder made of high strength-zinc alloy is connected in perpendicular to the ball shank. With grease pockets provided on the top and bottom of the spherical area, this model achieves high lubricity and high wear resistance.
High Strength Aluminum Alloy Model BL-A
The holder is connected in perpendicular to the shank, which comprises a male thread specially welded with a highly accurate steel ball.With a grease pocket formed on the top and bottom of the spherical area, this model achieves high lubricity and high wear resistance.Use of the A-1 alloy in the holder significantly reduces the weight
Female Threading Holder Model RBI
With this Link Ball model, the high strength zinc alloy is used in its holder and the mounting bolt and the holder are arranged on the same axis, allowing this model to receive both a compressive load and a pulling load. Since grease is contained in the boot, this model achieves high lubricity and high wear resistance.
|
|
|
The most economical linkage option. Avoid the loose fit of pinned connections with a ball joint linkage. Offered in a wide range of styles from the basic staked to a hardened housing and snap ring assembly for increased wear and strength. Quick disconnect versions as well as plastic ball joints are also available. Steel version are available with rubber dirt shields to offer added protection against the environment.
|
|
Ball joints serve as linking and guiding elements for movable parts and create corner joints. These parts from component suppliers can significantly simplify mechanical construction, be used to transfer power in offset axles, transmit movement and are indispensable in all mechanical operations such as cushioning, drawing, tilting, levering, etc.
mbo Osswald always keeps a large number of ball joints out of his product palette of more than 12,000 parts in stock. In addition to the DIN 71802 ball joints which consist of DIN 71805 housings and DIN 71803 ball studs, every possible variation is ready to be called up by the customer. There is also a choice of surface protection such as, for example, blank, galvanised zinc, steel or stainless-steel versions.
For problematic environmental conditions (dust, lubricants) there are special ball joints with sealing caps available. The programme is extended with axial joints.
|
|
Sealmaster® Y-Stud
* Accommodates up to ± 25 degrees of angular misalignment in any direction and provides linkage assembly advantages
* Manufactured from carbon steel and plated for corrosion protection
* Hex wrench flat facilitates assembly
* Available on TR/TRE, TR-N/TRE-N, CFF/CFM, CFF-N/CFM-N, CTFD/CTMD rod ends bore sizes from 3/16" to 3/4"
|
|
Housings, ball studs and Co. are as various in their geometry, appearance and construction as the ideas of the designers.
There are standard parts in every possible size, construction and material composition available for most applications. As one of the leading German specialist for linking elements, mbo Osswald always keeps a large number of ball studs and housings out of his product palette of more than 12,000 parts in stock.
|
|
Housings, ball studs and Co. are as various in their geometry, appearance and construction as the ideas of the designers.
There are standard parts in every possible size, construction and material composition available for most applications. As one of the leading German specialist for linking elements, mbo Osswald always keeps a large number of ball studs and housings out of his product palette of more than 12,000 parts in stock.
|
|
rod end housing:
forged steel, tempered, case hardened, bearing race, ground and lapped, rolled thread, surface galvanized
inner ring:
ball bearing steel, hardened, superfine ground
lubrication:
Polyrex EP2 or soap complex
temperature range
-20 °C to +120 °C
lubrication nipple:
DIN 3405 D1/A (sizes 1/4 to 3/8)
DIN 71412 H1 (sizes 1/2 to 1/1)
bearing clearance:
15 - 40 µm radial
tolerances:
view
|
|
rod end housing:
forged steel, tempered, case hardened, bearing race, ground and lapped, rolled thread, surface galvanized
inner ring:
ball bearing steel, hardened, superfine ground
lubrication:
Polyrex EP2 or soap complex
temperature range
-20 °C to +120 °C
lubrication nipple:
DIN 3405 D1/A (sizes 6 to 10)
DIN 71412 H1 (sizes 12 to 30)
bearing clearance:
15 - 40 µm radial
tolerances:
view
|
|
|
Stainless Steel rod end with injection-molded, reinforced nylon race. Low maintenance, self-lubricating and moisture resistant for versatility. Stainless steel ball, body and optional stud are suited for many applications requiring high wear and corrosion resistance such as marine, recreational, construction and trucks/off highway vehicles.
|
|
A Series Rod Ends
A Series rod ends combine a plated, hardened steel ball with a plated steel housing. The raceless method of construction provides a greater housing mass and increased static load capacity. This construction is recommended for cost sensitive applications requiring a higher static capacity
|
|
Sealmaster Precision Series Rod Ends
2- piece
* Sealmaster precision series two-piece rod ends are available in a wide variety of options:
* Bore size from 3/16" to 1"
* Custom rod lengths
* Male (CFM-T) and female rods (CFF-T)
* Right and left hand threads
* Two piece construction with self-lubricating PTFE liner for applications where grease lubrication is not practical or desirable
* Manufactured with consistent, no load, rotational torque values for accurate linkage control
* Machined carbon steel housings with protective coating for corrosion resistance
* Increased wrench flat depth on female rod ends facilitate assembly
* Alloy steel, heat treated, chrome plated ball for wear resistance
|
|
|
3 piece stainless steel and steel varieties with optional PTFE liner. Used mainly for precision motion control applications such as performance racing, automotive and specialized industrial equipment.
|
|
Sealmaster® Precision Series Rod Ends
3-piece
* Sealmaster precision series three-piece rod ends are available in a wide variety of options:
* Bore sizes from 3/16" to 1"
* Three-piece design
* Custom rod lengths
* Male (TRE) and female rods (TR) rods
* Grease fitting
* Right and left hand threads
* Three-piece construction for reduced "pound-out" in applications with high frequency oscillation, vibration or shock loading
* Housings and one-piece carbon steel outer race with protective coating for corrosion resistance
* Increased wrench flat depth on female rod ends facilitate assembly
* Alloy steel, heat treated, chrome plated ball for wear resistance
* Grease fittings available on ¼" through 1" bore sizes
|
|
|
|
|
|
NMB-Minebea is one of the leading manufacturers of rod-end and spherical bearings for the aerospace industry, as well as for industrial applications. The bearings are produced in the USA, Japan and other countries. In Europe, our subsidiary "NMB Minebea UK, Ltd." (based in Lincoln, England) develops and manufactures bearings for high-level applications. Using computer-supported CAD testing and production systems, our engineers not only develop standard bearings, but also extremely complex bearing systems in accordance with customer requirements.
Our products are used in high-level customer-specific applications, e.g. in civilian and military aircraft construction for wing flaps and landing gear. We possess all the required current international permits, approvals and licenses for this sector.
Furthermore, our rod-end bearings are used in high-speed trains and light rail transit, as well as in a broad range of other industrial projects.
Moreover, we also supply prominent Formula 1 racing teams and renowned vehicle manufacturers in the automotive industry, areas where the performance and reliability of our products have to be guaranteed at all times, even under extreme operating conditions.
In addition, we offer special fasteners for the aerospace industry.
|
|
|
|
|
|
DURBAL heavy-duty rod ends with a integral maintenance-free spherical plain bearing, Series BEM, BEF, EM, EF
In many cases DURBAL heavy-duty rod ends with integrated spherical plain bearing serve their purpose. They are primarly used for small swiveling or tilting movements at low speeds. They stand out for their high loadability and can also be used for shock loads.The ball slides on a composite bearing shell consisting of a glass fiber-filled nylon/teflon component. This design ensures an absolutely maintenance-free rod end. DURBAL heavy-duty plain bearing rod ends have a slight initial stress and virtually no clearance. The composite material used has a favorable secondary advantage in that it absorbs any foreign particles and embeds them so that no damage can occur. The joint balls of DURBAL heavy-duty rod ends with integrated spherical plain bearings are hard chrome plated. This reliable corrosion protection ensures that the function of the rod end will not be affected by a corroded ball surface under humid operating conditions.
|
|
Female thread greasable, low maintenance, shields adapter sizes according to DIN 648, seriesK.
forged steel, tempered, case hardened bearing race, ground and lapped, surface galvanized
|
|
Description of bearing types
Male, female or spherical bearings are ready-to-use mechanical components, based on the journal bearing principle.
These components are used in mechanical construction to transmit static or dynamic forces at different angles.
Male and female bearings are sometimes called tips or ends.
Spherical bearings are sometimes just called bearings.
The design of bearing components is governed by the DIN / ISO 12240 standard, which also specifies the overall and interface dimensions and with neighbouring mechanical components.
Bearing components can be self-lubricating or fitted with grease nipples.
Spherical bearings supplement ball bearings or other casings in slow movements. They are also ale to withstand high loadings because of the larger surfaces in contact..
The body of spherical bearings can be made from various materials: standard steel, high grade steel, stainless steel or aluminium.
|
|
Rod End : Female
The ASW series is Aurora’s line of female rod ends manufactured to SAE-AS 81935/2-03 through SAE-AS 81935/2-16, and are fully approved for procurement under those specifications.
In addition to the mil spec approved rod end configurations, non-standard materials substitutions and dimensional modifications are possible, as are variations in no load rotational torques to meet specific customer application requirements.
|
|
DIN ISO 12240
The TESCUBAL® maintenance-free articulated heads and ball joints employ a coupling of metal (spherical ring) on sintered metal (bush) impregnated with a high-potency lubricating fluid.
The bush has the dual function of withstanding the loads applied and guaranteeing the necessary lubrication during operation.
|
|
Male thread, maintenance free, adapter sizes according to DIN 648, series K.
rod end housing:
forged steel, tempered, rolled thread, surface galvanized, free of Cr VI
joint ball:
ball bearing steel, hardened and ground, surface superfinished and chromium plated
race:
Nylon/Teflon/Glass compound
tolerances:
view
|
|
Rod ends DIN ISO 12240-4 (DIN 648) with male thread
Rod ends are some of the most frequently used linking elements in industry. These parts can be found everywhere where simple movements are required, e.g. linear pulling, pushing or even axle offset compensation. The linking technology specialist, mbo Osswald, provides a particularly wide application range with a whole assortment of different rod ends and pivoting bearings.
|
|
Rod Ends: Male
The ASM series is Aurora’s line of male rod ends manufactured to SAE-AS 81935/1-03 through SAE-AS 81935/1-16, and are fully approved for procurement under those specifications.
In addition to the mil spec approved rod end configurations, non-standard materials substitutions and dimensional modifications are possible, as are variations in no load rotational torques to meet specific customer application requirements.
|
|
|
Our catalog database contains a vast number of standard parts for rod end clip applications: Door Latches, Rod linkages, and miscellaneous latching mechanisms.
|
|
Male thread greasable, low maintenance, shields adapter sizes according to DIN 648, series K.
rod end housing:
forged steel, tempered, case hardened, bearing race, ground and lapped, rolled thread, surface galvanized
inner ring:
ball bearing steel, hardened, superfine ground
lubrication:
Polyrex EP2 or soap complex
temperature range
-20 °C to +120 °C
|
|
|
|
|
|
precision rod ends
Heim® Bearings produces the industry's widest range of rod end types and sizes. Heim's® product range includes rod ends with brass race inserts in standard, precision, and high capacity designs; high strength two piece designs; self-lubricating rod ends with engineered thermoplastic races or Teflon® liners; and military standard rod ends for the ultimate in rod end performance. Heim® also produces a complete line of ball bearing rod ends that have extremely low friction and accommodate misalignment. Heim® rod ends are also available with a variety of platings, coatings, and materials, and with a wide range of optional features such as lubrication fittings, left hand threads, and keyway slots.
Heim Rod Ends
Heim Bearings produces the industry's widest range of rod end types
and sizes. Heim's product range includes rod ends with brass race
inserts in standard, precision, and high capacity designs; high strength
two piece designs; self-lubricating rod ends with engineered thermoplastic
races or Teflon® liners; and military standard rod ends for the
ultimate in rod end performance. Heim rod ends are also available with
a variety of platings, coatings, and materials, and with a wide range of
optional features such as lubrication fittings, left hand threads, and keyway
slots.
|
|
Description of bearing types
Male, female or spherical bearings are ready-to-use mechanical components, based on the journal bearing principle.
These components are used in mechanical construction to transmit static or dynamic forces at different angles.
Male and female bearings are sometimes called tips or ends.
Spherical bearings are sometimes just called bearings.
The design of bearing components is governed by the DIN / ISO 12240 standard, which also specifies the overall and interface dimensions and with neighbouring mechanical components.
Bearing components can be self-lubricating or fitted with grease nipples.
Spherical bearings supplement ball bearings or other casings in slow movements. They are also ale to withstand high loadings because of the larger surfaces in contact..
The body of spherical bearings can be made from various materials: standard steel, high grade steel, stainless steel or aluminium
|
|
|
2, 3 & 4 piece stainless steel and low carbon steel varieties with optional PTFE linder. Used in mechanical motion transfer applications - lawn & garden, agricultural, and construction.
|
|
Rod ends DIN ISO 12240-4 (DIN 648)
Rod ends are some of the most frequently used linking elements in industry. These parts can be found everywhere where simple movements are required, e.g. linear pulling, pushing or even axle offset compensation. The linking technology specialist, mbo Osswald, provides a particularly wide application range with a whole assortment of different rod ends and pivoting bearings.
|
|
|
|
|
|
From our original offering of one series of rod ends, the Aurora line now encompasses over 30 different standard series of rod ends in inch, or imperial, and metric dimensions.
All feature one-piece, full-swage steel raceway construction, with the exception of the SPM/SPW series, which feature a proprietary low friction high wear resistance molded liner. Aurora PTFE liners are available in most series. From the economy commercial CM series through the performance racing PRM series, Aurora Bearing Company has a standard catalog series bearing for every rod end need. In addition to catalog offerings, non-standard materials substitutions and dimensional modifications are possible, to meet specific customer application requirements.
Inch
The Aurora Bearing product line features over twenty different series of rod ends in inch, or imperial, dimensions. Products range in bore size from 1/8 to 2 inch, with threads from 6-32 through 2”-12. All feature one-piece, full swage steel raceway construction, with the exception of the SPM/SPW series, which feature a proprietary low friction high wear resistance molded liner.
Aurora PTFE liners are available in most series.
Metric
Aurora features 5 lines of metric rod end bearings. These range from the economy/commercial through to the high strength AM/AW-M series. All feature one-piece, full swage steel raceway construction. Dimensions follow DIN 648 schedule K. All series, with the exception of the CM/CW-M, are available in fine thread styles as well. Products range in bore and thread size from 3mm through 30mm. On most series, PTFE liners are available.
|
|
Alinabal offers a complete line of rod ends designed with the performance racing market in mind.
Product Groups
- A Series Rod Ends
- Alumi-Lite Series Rod Ends
- Pro-Line Series Rod Ends
- Aluminum Pro-Line Series Rod Ends
- RM Series Rod Ends
|
|
|
|
