- Machine-tools >
- Cutting Tool >
- Ball nose milling cutter
Ball nose milling cutters
Diameter : 0.25 mm - 2 mm
Length: 15, 20.5, 30.5 mm
These tapered ballnose endmills are designed specifically for doing detailed 3D carvings in a variety of materials up to a hardness of HRC55. They perform extremely well with very complex designs and can leave an outstanding finish on ...
Diameter : 1 mm - 6 mm
Length: 4 mm - 52 mm
Specifically designed for 3D carving, engraving and lettering these 2 flute ball nose endmills are great a cheaper alternative to tapered ball nose endmills. These ...
Diameter : 1 mm - 6 mm
Length: 4 mm - 24 mm
These 2 flute ballnose endmills are designed for machining of steels and stainless steels, they are a great solution for mould makers with a long shank for deeper cuts. They are suitable for machining ...
Diameter : 4 mm - 10 mm
Length: 50 mm - 72 mm
Ball Nose Endmill Z2 SC E2 - 21412-4 Discover our range of mill bits for a variety of applications, but always meeting the quality criteria that we impose. Our roughing mill bits are designed to ...
Diameter : 3 mm - 16 mm
Length: 38 mm - 92 mm
Ball Nose Endmill Z3 SC E2 - 21422-3 Discover our range of mill bits for a variety of applications, but always meeting the quality criteria that we impose. Our roughing mill bits are designed to ...
Diameter : 6 mm - 16 mm
Length: 57 mm - 92 mm
Ball Nose Endmill Z4 HM E2 + EZI-ALPHA for difficult materials - 21433A-6 Discover our range of mill bits for a variety of applications, but always meeting the quality criteria that we impose. Our ...
Diameter : 0.6 mm
Length: 19 mm
Carbide milling cutter, sphere, shank Ø 1.6 mm Shape: - sphere Total length: - 19 mm Head dimension Length: - 0.5 mm Head dimension Ø: - 0.6 mm Head dimensions: - Ø 0.6 x 0.5 mm Shank ...
Diameter : 1 mm - 12 mm
Length: 50 mm - 110 mm
... 4-flute ball End Mill for machining high-hardness steel has been improved by applying TH3 coating. Achieves even longer tool life when machining high-hardness steel. Added 5DC type with ...
MOLDINO Tool Engineering Europe GmbH
Diameter : 1 mm - 12 mm
Length: 45 mm - 105 mm
END MILL, full radius, CVD-diamond-tipped – for milling aluminium alloys, graphite and plastics reinforced with abrasive fillers, such a CFRP and GFR.
Paul Horn
Length: 53 mm - 120 mm
Rotational speed: 11,000 rpm
Version: GARANT burrs are manufactured from high performance carbide grades with high wear resistance and maximum cutting edge strength, using only the latest CNC machines. Steel shanks are used when the head diameter ...
Diameter : 0.38 in - 1.25 in
Length: 3.5 in - 11.81 in
Ball Nose Cutting System for 3D Contour Milling Features and Benefits Ultra-Stable clamping system and excellent repeatability! Through-the-tool coolant, delivered to the cutting ...
Ingersoll Cutting Tools
Diameter : 1, 1.5, 2, 4 mm
Length: 65, 70 mm
... Shoulder Milling: Ball Nose -3D Profiling -Corner Style: Ball Nose -Helix Angle: 30°
Kennametal
Diameter : 3 mm - 25 mm
Length: 57 mm - 104 mm
... which alters and controls the cutting dynamic taking chatter suppression to an unprecedented level. High material removal rates with impressive tool life. Available in standard and metric sizes. Square, corner radius, ...
KYOCERA SGS Precision Tools
Diameter : 10 mm - 20 mm
Cutter range 10-20 mm Max depth of cut 2.5 mm (.1 inch)
SECO TOOLS
Diameter : 0.2 mm - 2 mm
Length: 40 mm
Rotational speed: 38,000 rpm - 60,000 rpm
... Binderless is harder than single-crystal diamond and has no cleavability. Therefore, it enables machining of hard brittle materials such as carbides and enables new machining methods. SUMIDIA Binderless ...
Diameter : 0 mm - 6 mm
Length: 39 mm - 64 mm
... from minor diameter to shank. Available in many different lengths for each size. Down to M1: full profile, with minimal cutting forces gives great surface finish and longer tool life. Partial Profile threadSelecting ...
... suitable for die mould machining the WBMR replaceable insert ball nose endmill efficiently roughs complex profiles. Its high feed rate capabilitry is a direct result of a sharp cutting ...
Diameter : 1 mm
Milling cutter bodies Multi-purpose cutter with indexable inserts With POKOLM's insert cutter system, tools and rotating inserts are perfectly matched to form a comprehensive ...
POKOLM Frästechnik GmbH & Co. KG
Diameter : 4 mm - 10 mm
Length: 80, 60 mm
Not just of interest to form designers. These ball-head end mills are characterised by the high accuracy of form of the full radius. The tools with numbers of teeth from Z1 to Z2, according to diameter range, are notable ...
Diameter : 2 mm - 20 mm
The tried and tested range of IMPACT MIRACLE anti-vibration end mills provides solutions to the familiar problems of chattering and poor surface finishes on components. The use of irregular pitch flutes and with varied helix angles significantly ...
MITSUBISHI MATERIALS
The PCDRB series is manufactured by NS Tool, and is a PCD ball nose end milling cutter that makes nano-level surface roughness by finishing carbides, which is available ...
NS TOOL
Diameter : 6 mm - 10.4 mm
Length: 16 mm
Insert drills, Pilots. Counterbores, Countersinks and Toolholders HSS Tol. - x9 Part no. - eg. 9.4: 01T-09.4
Granlund Tools
Diameter : 0.01 in - 0.38 in
Rounding End Mills, Double End Whether the print calls for a radius, or a final operation deburring cycle, the CRC Series from Data Flute will add the finishing touch to your next machined part. Save time and produce a better part. The ...
Diameter : 16, 25 mm
Length: 100 mm - 140 mm
... customize corner rounding cutter every time, but only needs to buy standard rounding insert to replace with. This can save the inventory cost of cutting tools. Rounding machining doesn't ...
SOLID CARBIDE BALL NOSE MILLING CUTTER FOR THE I-9209 LASER GRINDER SOLID CARBIDE BALL NOSE MILLING CUTTER ...
Diameter : 0.1 mm - 20 mm
Length: 50 mm - 100 mm
Rotational speed: 1,590 rpm - 32,000 rpm
Ball Nose End Mills MG Carbide AlTiN X-NaNo 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting ...
7Leaders Corp.
Diameter : 2 mm - 20 mm
Length: 57 mm - 104 mm
Ball nose copy cutters - Z=2 Helix 40° - Similar to DIN 6527-L “ULTRA Ra” Speed Line with fine lapped chip flutes
Cerin s.p.a.
Diameter : 10, 12, 16, 20 mm
Length: 100 mm
Heavy metal tungsten alloy ball nose end mill with 2 or 3 PCD cutting edges for CNC automated cutting of CFRP, aluminium and lightweight metals Particularly indicated ...
Cruing Italy srl
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining