- Hydraulics - Pneumatics >
- Valve >
- Ball valve
Ball valves
DN: 8 mm - 300 mm
Pressure: 63 bar
Temperature: -10 °C - 200 °C
Ball valve to ANSI/ASME with threaded ends (NPT), butt weld or socket weld ends, three-piece body, full bore, floating ball. Plastomer sealing (also in fire-safe design). Main Applications ...
KSB
DN: 0.5 in - 3.15 in
Pressure: 700 bar
Temperature: -40 °C - 150 °C
... Isolation Ball Valves are designed for use on Air Conditioning and Refrigeration units. They ensure positive shut off refrigerant flow in either flow direction, even during system evacuation. The ...
DN: 75 mm - 100 mm
Pressure: 400, 414 bar
Temperature: -57 °C - 191 °C
Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit Features -Compact design minimizes space requirements; low weight improves ...
Emerson Automation Solutions - TESCOM
DN: 19, 30 mm
Pressure: 30 mbar - 5,500 mbar
Temperature: -20, -30, 66 °C
The Type VS100 slam shut is constructed in such a way that it shuts off the gas flow to the downstream system when the outlet pressure goes above or declines below the predefined levels. Type VS100 slam shut has a ductile iron and ...
FISHER REGULATORS
DN: 1 in - 12 in
Pressure: 10 bar - 40 bar
Temperature: -46 °C - 450 °C
Special features • - Consisting of segmented ball valve and actuator Accessories • - Type 2 N Strainer • - Type 2 NI Strainer Options • - Stopfbuchspackung zertifiziert nach DIN EN ISO 15848-1 • ...
DN: 15 mm - 80 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 185 °C
... stainless steel full bore ball valve of 3-piece design for steam, water and air. Benefits and Features High Cost Performance Ratio Long Service Life All stainless steel for excellent resistance ...
DN: 80 mm
Pressure: 10 bar
Temperature: -40 °C - 180 °C
Features •Increased safety •Superior corrosion resistance •Extended lifetime •Lower operating costs Specifications •Design - ISO/DIN •Nominal Pressure - 10 bar •Lining - PFA •Housing Material - EN-JS 1049 •Face-to-Face ...
Richter Chemie Technik
DN: 0.125 in - 0.375 in
Pressure: 16 bar
Temperature: 60 °C
This vented 2-Way Ball Valve provides quick and easy manual isolating and venting of either pressure gauges or any other pressurized control loop components.
BERMAD CS Ltd
... Continental has a full range of stack valves including check, flow control, relief, reducing, sequencing, shuttle valves and counterbalance valves – all manufactured to NFPA and ANSI/ISO ...
DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 250 °C
... and wet materials are strictly prohibited from entering the valve. 4. It is strictly forbidden to Weld flanges after installing valves in order to avoid damaging valve sealing rings. ...
DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F
The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is ...
NIBCO
DN: 0.25 in - 2 in
Pressure: 2,000 psi
AISI-316 (ASTM-A351-CF8M, EN10213 1.4408), AISI-304 (ASTM-A351-CF8, EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded end,Blow-out proof stem Polished surface (stainless steel only),
BOLA-TEK Mfg.Co
DN: 20 mm - 150 mm
Pressure: 6 bar
Temperature: 2 °C - 110 °C
... heating systems in which a certain loss through leakage is desired. Features MH32F: 3-way valves with nominal diameters DN 20...150 MH42F: 4-way valves with nominal diameters DN 32...50 Can be ...
DN: 15 mm - 100 mm
Pressure: 63, 50 bar
Temperature: -20 °C - 160 °C
Shut-off valve is made of three stainless steel parts with floating precision ball. The valve is operated pneumatically (double- and single-acting) and is characterized by a long service ...
DN: 0.375 in
Ball valve • Very suitable for quick shut-off valve (open-close) • Can be operated under maximum pressure • Connection: 3/8" NPT female (2x)
DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -40 °C - 210 °C
These PFA lined ball valves are used in a wide variety of applications in many industries The valves are ideally suited for corrosive applications, requiring reliable performance, ...
Pentair Valves & Controls
K-Tron Aeropass Valve aim at transferring the material straight on to a Hopper allowing to be used in non-authorized spaces. It consists of an instant switch off material on total filling of Scale Hopper. Aeropass Valve ...
Coperion K-Tron GmbH
DN: 0.5 in - 0.75 in
Pressure: 172 bar - 207 bar
... Adjustable flow control valve. AFD series Applications Dependably adjust and maintain a constant flow downstream from the valve with Cross flow control valves. Using the lever and ...
... series is an isolation valve developed by MKS Instruments. It is built with stainless steel construction with precise vacuum isolation. It is equipped with bellows and ball valves, ...
DN: 16 mm - 110 mm
Pressure: 10, 16 bar
... without emptying the system. • Handle built-in tool for easy adjustment of the threaded seal-carrier (and ball torque). • “Antiblock” system that avoids ball blockage. • 100% factory tested. • Minimal ...
Cepex SER
DN: 6 mm - 100 mm
Pressure: 16 bar - 40 bar
Temperature: -20 °C - 120 °C
Body material Nickeled Brass Ball material Brass PN (End) PN25 End BSP Female/Female Contact sealing PTFE Operating system Lever
TECOFI
DN: 0.25 in - 2 in
Pressure: 400 psi
Threaded, 2-Piece, Std. Port, Bronze Ball Valve, 400 CWP, Sizes: 1/4" to 2" (DN 8 to DN 50)
Conbraco Industries
Pressure: 2,000 psi - 20,000 psi
Temperature: -46 °C - 121 °C
• The valve switch transmission adopts the ball screw structure, effectively reduce the operating torque and achieve common valve 1/3. • Gate valve structure • Valve ...
DN: 0.5 in - 2 in
Pressure: 25, 16 bar
Temperature: -5 °C - 90 °C
... a full bore and anti blow-out stem with fabrication according to NF079. Its solid and rilled ball is designed to prevent water stagnation between the ball and the body. It was technically made with ...
SFERACO
DN: 12 mm
This is the LBS-PN 64 series of ball valves from FG Inox. It is engineered from an AISI 316 stainless steel and is made with a female threading type on both ends. The series comes in 8 variants that have ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining