|
|
1-Piece, Instrumentation, 40 Series Ball Valves
1-Piece, Instrumentation, 40G Series Ball Valves
2-Piece, Instrumentation 33 Series Ball Valves
3-Piece, Alternative Fuel Service, High Pressure (up to 6000 psig [413 bar])
3-Piece, Instrumentation, High-Pressure (up to 10 000 psig [689 bar]), 83 Series Ball Valves
3-Piece, Multipurpose SK Series Ball Valves
3-Piece, Process / Instrumentation, 60 Series Ball Valves |
|
1. Made only from rust proof and acid resistant stainless steel.
2. For a wide range of applications in all industries.
3. No pressure drop due to full flow bore.
4. Easy operation, even under high pressure.
5. Long life due to exchange seals.
6. Individually works tested. |
|
M/F B12 SERIES BALL VALVE
Manual, pneumatically actuated, and electrically actuated B Series Ball Valves are designed to provide positive leak tight shut-off and control of fluids utilized in process and instrumentation applications. The two way valves provide quick 1/4 turn on-off control of media and the three way valves may be used as diverting or selecting valves.
A broad selection of valve body, seat, and seal materials provides a wide range of pressures and temperatures at which the valve may be used.
M/F B2 SERIES BALL VALVE
Manual, pneumatically actuated, and electrically actuated B Series Ball Valves are designed to provide positive leak tight shut-off and control of fluids utilized in process and instrumentation applications. The two way valves provide quick 1/4 turn on-off control of media and the three way valves may be used as diverting or selecting valves.
A broad selection of valve body, seat, and seal materials provides a wide range of pressures and temperatures at which the valve may be used. |
|
Cepex offers a complete range of ball valves in PVC-U and PVC-C (both manual and automatic), featuring the "Antiblock" system which prevents ball jamming. Valves are 100% hydro tested prior to leaving the factory, and their reliability is further guaranteed by the world's premier certification institutes.
Ball valves are available in accordance with several dimensioning standards (Metric, BSP, ASTM, NPT, British Standard, JIS...) in order to meet the requirements of any market.
|
|
- ball valves
- full sealing, excellent resistance to scaling
- smooth operation and long life
- numerous configurations from DN 4mm to 50mm
|
|
The isolation flange is a combination of a full port isolation ball valve and a companion flange for circulators. The isolation flange allows easy service or replacement of the circulator without the need to drain the system.
Free-floating flanges eliminate the need to align flanges making the pump installation a snap. Includes capscrews and nuts.
Can be used with most circulators, including NRF/NBF/SSF wet rotors, Series PL's, Series 100, HV, PR & LR and other manufacturers' pumps. |
|
S66 on-off kulventil
S66 is a series of "high performance" ball valves specially suitable for on-ff applications. The valve is designed to be maintenance free and to give a flexible installation.The series is availabe in DN8 to DN100 with reduced bore and in DN8 to DN50 with full bore.
THE TYPE S66 FEATURES:
- BODY, BALL AND END CAPS IN STAINLESS STEEL (AISI316/316L)
- INVESTMENT CASTING
- SOLID BALL WITH CYLINDRIC FULL BORE
- PRESSURE RELEASED SEAT RINGS (PTFE/GLASFIBER ALT. PTFE/AISI 316)
- LOCK-CAP FOR THE GLAND NUT (AISI 316)
- SEPARATED BODY SEALS
- V-RING TYPE STEAM SEALS
- ISO TOP FLANGE
- ACTUATOR BRACKET INVESTMENT CASTING (OPTION) |
|
2-Way & 3-Way
For Building Automation, Temperature Controls & HVAC, Hot Water, Steam & Chilled Water |
|
105MBPClass 150 Cast Bronze Globe Body Silent Check Valves
Size:
2 to 30 in. (50 to 750mm)
Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge applications. |
|
The Georg Fischer ball valve type 546 is now also available in the materials (ß)-PP-H and PVDF. Users in increasingly safety-conscious markets highly appreciate the diverse features of the new ball valve.
The materials (ß)-PP-H and PVDF meet the stringent requirements of, for instance, the chemical process industry, the food and beverage industry and the electroplating and metal industries.
|
|
Ball Valve Type 546
Flexible high quality ball valve with many additional features for all applications
Ball Valve Type 375
The perfect ball valve for non critical applications
Ball Valve Type 343
Reliable 3-way ball valve for diverting and mixing-processes. Available in horizontal and vertical direction
Ball Valve Type 323
A professional ball valve for exact dosing of media
Ball Valve Type 322
Easy and safe valve for laboratory applications
Ball Valve Type 353 - 355
The standard ball valve for all water applications |
|
Applications:
Suitable for the following processes: hand cutting, sheet
metal cutting, rivet cutting, heating and gouging. |
|
- BALL VALVES :
- BRASS VALVES
- CAST IRON VALVES
- STAINLESS STEEL VALVES
- CARBON STEEL VALVES
- PVC VALVES
|
|
ART. 424
2-WAY FULL-BORE THREE PIECE CASTED STAINLESS STEEL BALL VALVE, THREADED-ENDS, BUTT WELD OR T-CLAMP
ART. 429
2-WAY FULL-BORE THREE PIECE CASTED STAINLESS STEEL BALL VALVE, THREADED-ENDS OR BUTT WELD
ART. 434
2-WAY FULL-BORE STAINLESS STEEL BALL VALVE, DIN 11851 FEMALE THREADED-ENDS
ART. 445
3-WAY FLAT BODY FLANGED STAINLESS STEEL BALL VALVE, “L” PORT
ART. 448
3-WAY FULL-BORE THREADED-ENDS STAINLESS STEEL BALL VALVE, “L” PORT
ART. 450-451
3-WAY FULL-BORE THREADED-ENDS STAINLESS STEEL BALL VALVE, “T” OR “L” PORT
ART. 460-461
3-WAY FULL-BORE FLANGED STAINLESS STEEL BALL VALVE, “T” OR “L” PORT
ART. 464-465
3-WAY FULL-BORE STAINLESS STEEL BALL VALVE, “T” OR “L” PORT, DIN 11851 FEMALE THREADED-ENDS
|
|
TORK Electric actuated valves are two series
1. Electric actuated ball valve
2. Electric actuated butterfly valve
TORK Electric actuated ball valve,T-EAV900Serie, are two main parts, a quater turn,90 degree turn electric actuator and ball valve. Out put torque value of electric actuator (Nm) , must be more 25%
than out put torque value of ball valve (Nm).
application: ball valves,butterfly valves,dampers,plug valves , on-off or proportional control |
|
Bex LA - Flush Mounted Ball Valves
LA valves are designed to be used on suspended fluids in the pulp and paper industry. The vave is aimed to meet some basic demands.
In sampling applications it must deliver a tru part of the main flow.
In drainage applications there must be no risk of clogging.
Installed the valve must not cause any heavy dynamic stress to the pipe or the wel
To meet the demands the fluid ahead of the ball must continuously be renewed. The ball must in practice be a part of the pipe wall. The flow ahead of the ball must also be turbulent and at very low velocity the fluid must be mobile. The design of the weld-on flange that is thin and with a conical entrance facing the ball ensure the function.
In drainage applications the fluid can be standing in front of the ball. The fluid can not be allowed to dewater into the valve body as normal for a ball valve. Fibers that get wedged between the ball and the upper seat ring can initiate a clogging problem. Of this reason the LA valve will always have a cavity filler around the ball.
La valves are designed to add as low weight as possible to the pipe wall and the welding. The weld-on flange is thin has a low weight and is easy to handle. The valve body will add a low weight to the weld-on flange and the center of gravity will be close to the pipe wall. The dynamic stress on the pipe and the welding will be low. |
|
The range of FIP actuated valves is produced in U-PVC, C-PVC, PP, PVDF and ABS for pipe diameters from 10 mm to 315 mm and for operating pressures up to 16 bar.
The vast selection of materials and dimensions can satisfy a wide range of application requirements. |
|
The VKD is a True Union ball valve, particularly suitable for industrial applications, where high performances and long time reliability are a must.
The patented Seat Stop® system assures great longevity of the seals in situations where vibration or thermal expansion occurs.
A micro-adjusting of the PTFE seals is also allowed.
As any accidental loosening of the ball carrier is not possible, the radial dismounting of the valve body can be done in full safety. |
|
TORK Pneumatic actuated valves are two types
1.Pneumatic actuated ball valves
2.Pneumatic actuated butterfly valves
click fore more information http://www.sms-tork.com.tr/default.aspx?pid=51091&grpID=6608
T-PAV 900 Series Pneumatic Actuated Valves;
double acting actuated ball valves and single acting actuated ball valve ,3 position actuated ball valves
TORK Pneumatic actuated valves accessories :
1)solenoid valves, 5/2 or 3/2 way(namur standard or standard type).
2)Limit switch box (shows valve position,and takes electrical signal )
3)positioner(proportional control application)
4)mounting kits(non standard valves)
5)Ex-proof solenoid valves
6)manuel ovirride
7)I/P Converter and PID control panel
TORK ball valves;
Flange,screwed,welding connection,or mono block body. way : 2/2 and 3/2 ,
body: brass,stainless steel,PVC, carbon steel,carbon casting
TORK pneumatic actuators ; double acting,single acting,3 position,180 degree turn.
Ball valve specifations: valve size,connection type of valvei,valve pressureclass,fluid pressure,valve way,valve body meterial, fluid type,fluid temperature, howmany pcs should valve open-close per day after ball valve can be select.
Certificates:CE(TUV) , ISO9001:2000 TUV, GOST, TSEK, LOYD,UNSEPRO |
|
BVH22
G1/4" - 3", DN10 - 80, PN63
Construction : 2-parts
Body / ball : 1.4408 / 1.4401
Connection : female thereaded
Actuator : handlever
BVH23
G1/4" - 4", DN10 - 100, PN40/63
Construction : 3-parts
Body / ball : 1.4408 / 1.4401
Connection : female thereaded, welding ends, flanged ends
Actuator : handlever
BVA23
G1/4" - 4", DN10 - 100, PN40/63
Construction : 3-parts
ISO-top fl ange
Body / ball : 1.4408 / 1.4401
Connection : female thereaded, welding ends, flanged ends
Actuator : pneumatic, electric
BVT/L34
G1/4" - 3", DN10 - 80, PN63
Construction : 3 ways
ISO-top fl ange
Body / ball : 1.4408 / 1.4401
Connection : female thereaded
Actuator : handlever, pneumatic, electric
BVC21
DN15 - 100, PN16/25/40
Construction : Compact-wafer
ISO-top fl ange
Body / ball : 1.4408 / 1.4401
Connection : flanged ends
Actuator : handlever, pneumatic, electric
BVO22
DN15 - 300, PN16/40
Construction : 2-parts
ISO-top flange
Body / ball : 1.4408 / 1.4401
Connection : fl anged ends
Actuator : handlever, pneumatic, electric |
|
The Model 6B and 10B Ball Valve of 2 piece design which gives higher strength and integrity. We have incorporated the same dynamic multi-ring gland system as in the needle valve, which when combined with the anti - blowout back seating stem, guarantees resistance to all operating processes and pressures.
Key Benefits are as follows :
Over designed high strength adaptor threads combine with soft parent metal bottom seal to give closure thread protection and ensures environmental safety.
Gland and stem leakage a thing of the past due to the dynamic multi-ring gland system, combined with the anti blowout back seating stem.
Precision cut CNC threads banish the problem of thread leakage, and the 100% 4 stage inspection means precise connectivity.
Super finished ball, floating within dynamic self relieving seats, offers dynamic response to fluctuating process pressures. This maintains 100% bubble tight seat closure in both directions. |
|
wide range of different connectors
e.g. bite fitting DIN 2353 L/S,
Whitworth female thread DIN ISO 228-1,
SAE, UNC and UNF female thread,
metric female thread ISO 6149
and NPT female thread ANSI B1.20.1
° nominal diameters from 4 to 50 (1/8“ to 2“)
high-grade materials like steel,
stainless steel or brass
for pressures up to 1400 bar (20000 PSI)
with optional pneumatic, electric
or hydraulic actuator
also available with
position indicator, limit switch,
proximity switch or locking device
|
|
Spherical faucet wafer
DNN (Nominal Diameter): 10-200 (other diameters and pressures on requests)
PN (Pressure rating): 6-100
TECHNICAL MAIN FEATURES
- Execution: A105, AISI 316
- Can be gone up with all types of actuators
- Connection of the actuators according to ISO 5211
- Anti-static
- Direction of the fluid in the two directions
- Technology: Forged
- Principle: Wafer/sandwich
Markets:
Chemistry
Hydroelectric
Oil/gas
Connection: Between flanges
Type of connection:
- ANSI
- PN/ISO
Passage: Integral |
|
Faucet with cryogenic floating sphere
- DNN (Nominal Diameter): 15-200
- PN (Pressure rating): 16-100
Technology: Forged
Principle: 2 parts
Markets:
- Cryogenics
- Oil/gas
Connection:
- Has flanges
- To weld |
|
Faucet with floating sphere 2 parts
DNN (Nominal Diameter): 4-200 (other diameters and pressures on requests)
PN (Pressure rating): 6-160
TECHNICAL MAIN FEATURES
- Execution: A105, ISO, ANSI 515 or AISI 316
- Can be gone up with all types of actuators
- Connection of the actuators Iso 5211
- Anti-static
- Direction of the fluid in the two directions
Technology: Forged
Principle: 2 parts
Markets:
Chemistry
Hydroelectric
Oil/gas
Connection: With flanges
Type of connection:
- THUS
- PN/ISO
Passage:
- Integral
- Reduced |
|
wide range with numerous variations
- nominal diameters from 4 to 65 (1/8³ to 2_³)
- nominal pressures up to 500 bar (7250 PSI)
- with optional pneumatic, electric or hydraulic actuator
- also available with position indicator, limit switch,
proximity switch or locking device 3-way ball valve with
floating ball
|
|
Faucet with shaft sphere
DNN (Nominal Diameter): 25-800 (other diameters and pressures on requests)
PN (Pressure rating): 6-420
TECHNICAL MAIN FEATURES
Execution: A105 or 316L
Double floating seats
Gaskets anti-blow of ram and replaceable
Triple seals
Anti-static
Fire-resistant according to API standard 6 FA/API 607/BS6755
Circulation of the fluid in the two directions
Technology: Moulded or Forged
Principle: Shaft sphere |
|
For operating under full pressure!
For use at extremely high pressure (ex. high pressure water jet-technology) Rötelmann offers ball valves made of high-tensile chrome molybdenum steel with a nominal pressure of PN 2.500 (nominal size DN 10). |
|
|
|
