- Hydraulics - Pneumatics >
- Valve >
- Ball check valve
Ball check valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 0.25, 0.375 in
Pressure: 300 psi
Temperature: 32 °F - 230 °F
Four varieties of check valves are offered by Clippard. Each permits flow in one direction only. All have brightdipped brass bodies that provide inline mounting, Nitrile seals and stainless steel ...
Pressure: 300 psi
Temperature: 32 °F - 230 °F
The Clippard Pilot-Operated Check Valve works as a standard check valve, but can also be opened with an air pilot signal to allow free flow in the normally checked direction. ...
DN: 0.25 in - 2 in
Check valves These one-way valves are made with bronze and brass with a seal in NBR nitrile rubber or, upon request, in Viton®, only for series 10 ... 11. To ensure a practical assembly ...
Flow rate: 38.3 l/min - 616.7 l/min
These check valves are mainly used on vacuum gripper systems containing multiple suction pads in order to shut off individual suction pads which are not covered. Thread size M5, G1/8, G1/4, G3/8, G1/2. Applications: - ...
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 60 °C
Flow rate: 200 l/min - 1,400 l/min
Stop valve with manual override option. • Valve function: piloted non-return function • Screw-in with external thread • Pneumatically piloted • Pilot air connection: M5, G1/8, G1/4, G3/8, QS-4 • ...
DN: 6 mm
Pressure: 0 bar - 350 bar
Temperature: -30 °C - 80 °C
Industrial hydraulic valve in a high performance range. Reliable blocking of the oil flow at selected ports. Seat valve Direct actuated Cracking pressure 1.5 bar Connection diagram ...
Bosch Rexroth - Industrial Hydraulics
Pressure: 0 bar - 320 bar
Temperature: -30 °C - 120 °C
Flow rate: 40 l/min
... performance Leak-free closing, suitable for fast cycling with long life High flow capacity In the standard version, the valve is zinc-coated for 240 h protection acc. to ISO 9227
Pressure: 12 bar
Temperature: -20 °C - 80 °C
... Technologies: • - Function fitting • - Pneumatic system • - Pneumatic fittings • - Control valve • - Pressure regulating valve • - Pressure regulator valve Technical Characteristics: • ...
DN: 1.3 mm - 54.9 mm
Pressure: 420, 500, 700 bar
Temperature: -40 °C - 80 °C
The check valve type RK and RB can be screwed in. The spring-loaded ball check valve type RK and RB is very robust and insensitive to soiling. The ...
HAWE Hydraulik SE
Pressure: 500, 400, 700 bar
Temperature: -40 °C - 80 °C
Flow rate: 6 l/min - 120 l/min
The check valve type ER can be plugged in. The spring-loaded ball check valve type ER is very robust and insensitive to soiling. Type ER can be integrated ...
HAWE Hydraulik SE
DN: 8 mm - 30 mm
Pressure: 500 bar
Temperature: -40 °C - 80 °C
Check valves are a type of non-return valve. They block the oil flow in one direction and open in the opposite direction. In the closed state they have zero leakage. The check ...
HAWE Hydraulik SE
DN: 5.5 mm - 8 mm
Pressure: 0 bar - 280 bar
Temperature: -40 °C - 149 °C
... ceramic ball design for aggressive environments. Additionally, our side exit variations offer unparalleled design flexibility. This threadless, cartridge-style, one-way valve offers higher flow capacity ...
THE LEE COMPANY
DN: 2.5 mm - 8 mm
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 149 °C
... Press-In Check Valve fits into many common plastic fittings. Lastly, our new 855 LC2 Series Press-In Check Valve offers more than a 65% increase in flow capacity over ...
THE LEE COMPANY
DN: 8, 5.5, 6 mm
Pressure: 400, 280 bar
Temperature: -40 °C - 149 °C
Standard Lee shuttle valves are available in three models: a 5.5 mm, 2.1 GPM* model; an 8.0 mm, 4.8 GPM* version; and our new 400 Bar valve. The new 400 Bar Shuttle Valve is just 6 mm ...
THE LEE COMPANY
DN: 6 mm
Pressure: 1 bar - 10 bar
Temperature: -20 °C - 80 °C
Easy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage Simpler pneumatic systems Medium: - Compressed Air Thread: - G1/8
DN: 15 mm - 100 mm
Pressure: 16, 40 bar
Temperature: -10 °C - 400 °C
... majority of the valves within the LCV range also offera replaceable seat arrangement for simple and quickmaintenance. This range is also ideal for low differentialpressure applications. How the lift check ...
DN: 0.125 in - 3 in
Pressure: 1,000 bar
... The check valves are available for inert/flammable gases and for oxygen and come complete with the seals suitable for the relevant medium. All check valves comply with ...
WEH GmbH Verbindungstechnik
DN: 3, 4, 5, 6 mm
Pressure: 0 bar - 250 bar
Temperature: -40 °C - 200 °C
WEH® Check Valve TVR200-S1 stainless steel, 0 - 250 bar - Product family The WEH® TVR200 Check valves made of stainless steel are ideal for applications with liquid ...
WEH GmbH Verbindungstechnik
DN: 10 mm - 20 mm
Pressure: 0 bar - 250 bar
Temperature: -20 °C - 200 °C
WEH® Check Valve TVR2-S1 stainless steel - Product family Thanks to their extreme leak tightness, the WEH® TVR2 check valves from stainless steel are perfectly suited ...
WEH GmbH Verbindungstechnik
DN: 0.125 in
Pressure: 0 psi - 125 psi
Check valves will prevent flow in one direction and facilitate flow in the opposite direction. Check valves are sometimes called non-return valves. Normally ...
DN: 3 in - 18 in
Copes-Vulcan has supplied check valves to the nuclear industry since the early 1970s. It is designed to provide positive shutoff even at low differential pressures. Features: 3-18 inch, Class ...
DN: 6, 12, 10 mm
Pressure: 10, 16 bar
... securely prevents backflow or back siphonage contamination risks up to Fluid Category 2 John Guest push-fit acetal single check valve provides protection from the reversal of flow or back siphonage ...
JOHN GUEST
DN: 2.7 mm - 14.3 mm
Pressure: 1,550 bar
Temperature: -20 °C - 200 °C
The O-Ring check valves are suitable for applications that require non-leakage sealing. It can be operated within the pressure of 1, 500 bar and is used for stopping the directional liquid and gas flow. ...
Maximator GmbH
DN: 2.7 mm - 14.3 mm
Pressure: 1,550 bar
Temperature: -20 °C - 350 °C
The MAXIMATOR ball check valves can be used even with high temperatures. Their shut off liquids and gases up to a maximum pressure of 1,500 bar. All valves have collars ...
Maximator GmbH
Pressure: 4,500 bar
Temperature: -20 °C - 200 °C
... O-Ring check valves are capable of shutting off directional flows of gases and fluids. They are incorporated with a leakage-resistant sealing feature. The O-Ring and Ball Check ...
Maximator GmbH
DN: 0.125, 0.25 in
Pressure: 5, 0.6 bar
Flow rate: 0 l/min - 340 l/min
Closes the vacuum line when ejectors are inactivate, thus maintaining the vacuum pressure within the system.
DN: 38.1, 50.8, 63.5, 76.2 mm
Valves / Check Valves Ball Check Valves have a 316L stainless steel body with a curved offset ball trap. FEATURES Product ...
Pressure: 700 bar
Check valve, hydraulically pilot operated max. operating pressure 700 bar. Design: Housing made of steel, surface galvanized. Spring-loaded ball acting as a valve ...
DN: 10 mm - 80 mm
Pressure: 6, 16, 10 bar
Temperature: 0 °C - 80 °C
Modular series concept Flaoting cone design Seal materials - EPDM, FPM Connections - flange, PE fusion socket, PE fusion spigot, solvent socket, solvent spigot, threaded socket Approvals - Declaration of Conformity acc. to Annex ...
DN: 10 mm - 80 mm
Pressure: 8, 6, 10 bar
Temperature: 0 °C - 80 °C
Modular series concept Floating cone design Seal materials - EPDM, FPM Connections - flange, fusion socket, fusion spigot, threaded socket Approvals - Declaration of Conformity acc. to Annex VII of the Directive 97/23/EG, ...
DN: 19 mm - 65 mm
Pressure: 250, 315, 400 bar
... BSP cylindrical internal threads Sealing form 1 + 2 Shape A Construction straight Design Non-return valve, connector Material Steel Surface electro galvanised
DN: 0.75, 0.5, 0.375, 0.25 in
Pressure: 0 bar - 210 bar
Temperature: -20 °C - 100 °C
Media Mineral oil Note These valves must be set according to the application.
DN: 15 mm - 50 mm
Pressure: 16, 10 bar
Temperature: -40 °C - 140 °C
The SR check valve allows the passage of fluid in a single direction. • Connection system for weld joints • PN10 valve body made for PP-H injection moulding and European ...
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 100 °C
The Easyfit check valve line developed with Giugiaro Design offers two different versions: SXE with ball shutter and SSE with spring loaded shutter. Easyfit check valves ...
DN: 65 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 100 °C
The Easyfit check valve line developed with Giugiaro Design offers two different versions: SXE with ball shutter and SSE with spring loaded shutter. Easyfit check valves ...
Pressure: max 40.0 bar
Temperature: -20 °C - 180 °C
Stainless steel AISI 316L non-return valves, are designed for harsh usage conditions. The driven shutter and the spring never compressed completely, guarantee very high intervention frequencies.
DN: 10, 12, 6, 8, 4 mm
Pressure: 0 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
Check Valve permits the air flow in one direction but checks the flow in the opposite direction, thus keeping the output pressure at a constant level. Usable in vacuum retention state ...
DN: 8, 6, 12, 10, 4 mm
Pressure: 10,000 Pa - 50,000 Pa
Temperature: 0 °C - 60 °C
Securing of air flow becomes possible at low pressure that the conventional valve does not operate. Min. opening pressure is lower from 10kPa(0.01MPa) to 5kPa(0.005MPa). Low level ozone resistant product. HNBR ...
DN: 2 mm - 16 mm
Pressure: 700 bar
Temperature: -40 °C - 80 °C
... and closed repeatably. The valve parts are made from high-strength hardened steel whereby the valve seat is specially processed and the patented ball cup is made from a high-strength, ...
DN: 3 mm - 6 mm
Pressure: 700 bar
Temperature: -40 °C - 80 °C
... pilot-operated check valves are leak-proof check valves with which the flow direction from B to A is open and the flow direction from A to B is normally blocked. If a ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining