|
|
Automatic Actuators:
High pressure and low pressure ball valves with electric and pneumatic actuators
Electric actuator:
• For low pressure ball valves in sizes from DN 06 to DN 50, for high pressure ball valves in sizes from DN 06 to DN 25
• Protection rating IP 65
• Voltage 12-24 V AC/DC and 85-240V AC/DC
Pneumatic actuator:
• For low pressure ball valves in sizes from DN 06 to DN 50, for high pressure ball valves in sizes from DN 06 to DN 25
• Single-acting and double acting
• Various accessories
All ball valves made of stainless steel AISI 316Ti
|
|
|
J+J, a UK ISO9001:2000 quality assured valve actuation specialist company, offer a wide range of ball valves fitted with the J3 reversible IP65 multi-voltage electric actuators. Valves offered are brass ball valves, stainless steel ball valves, cast iron ball valves and plastic ball valves. Most are availalble in 2 port and 3 port design. All packages are assembled & tested in-house.
|
|
The J+J electric actuator is widely used in the plastic valve market because it has a plastic housing making it light in weight, and as it has more standard features than any of its rivals, offers exceptional value.
The new J3 Series electric actuators offer an LED status light and plug & play conversion kits that change the function from on-off to failsafe, or modulating, or both.
|
|
2-Way Poly KZValve (shown with KZCO's EH2 actuator)
VALVE FEATURES:
- Valve Sizes from 3/4" to 2" Full Port Single Valves
- Valve body available in poly or nylon
- Ball and Stem: 316SS
- Seat: Virgin PTFE
- Stem Seal: Dual VITON O-Ring
- Body Seals: EPDM
- Max PSI 150 @70F (Poly)
- Max PSI 300 @70F (Nylon)
- Wiring (most configurations available)
- FNPT or Flanged outlets available
- Quick Hairpin (QH)(1" Only)
ACTUATOR FEATURES:
- High quality, durable actuator housing rated NEMA 6P for waterproof applications and NEMA 7D for Ignition Protection applications
- 12/24 VDC and 24 VAC operation available
- Tough aluminum gear box with metal gears
- Actuator housing available with "indicator flag" or with "blank" lid
- Waterproof wire plug connectors
- Private labeling available
Consult our Engineering or Sales staff for application assistance.
|
|
The Georg Fischer ball valve type 546 is now also available in the materials (ß)-PP-H and PVDF. Users in increasingly safety-conscious markets highly appreciate the diverse features of the new ball valve.
The materials (ß)-PP-H and PVDF meet the stringent requirements of, for instance, the chemical process industry, the food and beverage industry and the electroplating and metal industries.
|
|
The VKD is a True Union ball valve, particularly suitable for industrial applications, where high performances and long time reliability are a must.
The patented Seat Stop® system assures great longevity of the seals in situations where vibration or thermal expansion occurs. A micro-adjusting of the PTFE seals is also allowed.
As any accidental loosening of the ball carrier is not possible, the radial dismounting of the valve body can be done in full safety.
The new patented Dual Block® system allows a proper nut tightening, without any risk for unscrewing due to vibrations.
|
|
|
|
|
|
TORK Pneumatic actuated valves are two types
1.Pneumatic actuated ball valves
2.Pneumatic actuated butterfly valves
click fore more information http://www.sms-tork.com.tr/default.aspx?pid=51091&grpID=6608
T-PAV 900 Series Pneumatic Actuated Valves;
double acting actuated ball valves and single acting actuated ball valve ,3 position actuated ball valves
TORK Pneumatic actuated valves accessories :
1)solenoid valves, 5/2 or 3/2 way(namur standard or standard type).
2)Limit switch box (shows valve position,and takes electrical signal )
3)positioner(proportional control application)
4)mounting kits(non standard valves)
5)Ex-proof solenoid valves
6)manuel ovirride
7)I/P Converter and PID control panel
TORK ball valves;
Flange,screwed,welding connection,or mono block body. way : 2/2 and 3/2 ,
body: brass,stainless steel,PVC, carbon steel,carbon casting
TORK pneumatic actuators ; double acting,single acting,3 position,180 degree turn.
Ball valve specifations: valve size,connection type of valvei,valve pressureclass,fluid pressure,valve way,valve body meterial, fluid type,fluid temperature, howmany pcs should valve open-close per day after ball valve can be select.
Certificates:CE(TUV) , ISO9001:2000 TUV, GOST, TSEK, LOYD,UNSEPRO
|
|
| ... products without technical information |
| |
Safety Switch STA
The robust metal safety switch STA is dimension-compatible with the proven EUCHNER safety switches TP and STP in plastic housings. Due to its die-cast aluminum housing and its high degree of protection IP 67, the switch can withstand even extreme ambient conditions. Like the switches TP and STP, the safety switch STA also offers a guard locking and a guard locking monitoring. A great variety of switching elements is available. The contacts can switch a minimum current of 1 mA. Therefore the safety switch STA is suitable for use in safe control systems.
Features
Robust design
3 cable entries
High degree of protection IP 67
LED upon request
AS-Interface version upon request
BG approval (pending)
|
|
|
|
|
|
Application:
Safety switches with separate actuator are suitable for sliding, hinged and particularly removable safety guards, which need to be closed to ensure the necessary operational security. They are also suitable for fitting on profile sections and existing equipment.
In combination with safety control modules all safety switches with class 2 shown in this chapter achieve Control Category 3 or 4 to EN 954-1.
Design and mode of operation:
On the safety switches with class 2, the switching element is not physically connected to the actuator but functionally brought together or separated for switching. When the guarding device is opened, the actuator is separated from the base unit. In the process, NC contacts are positively opened and NO contacts closed.
Enclosure rating of all the safety switches is IP 67. The safety switches can be fitted in any desired mounting position.
Schmersal make both standard and AS-i Safety at Work safety switches with separate actuator.
Or for the standard models click below
|
|
|
|
|
|
SAFETY SWITCH WITH SEPARATE ACTUATOR FW SERIES
These safety switches are ideal to control gates, sliding doors and other guards protecting dangerous parts of machine. The stainless steel actuator is fastened to the moving part of the guard, so it is removed from the switch on every opening of the guard. The switch mechanism guarantees that removing the actuator forces the positive opening of the electrical contacts. Easy to install, these switches can be applied to any kind of protection (with hinge, sliding and removable ones). Besides, the possibility to actuate the switch only with its actuator guarantees that the machine can be restarted only when the guard has been closed.
- Polymer housing, three M20 or M16 knock out conduit entries
- Protection degree IP67
- 6 contact blocks available
- 8 stainless steel actuators available
- 30 N actuator extraction force versions
- Silver contacts gold plated versions
- Cylindrical or slotted fixing holes
- Cover with hinged opening and with only one fixing screw
|
|
|
Bernstein presents the innovative safety switch SLK as a solution to safety applications in industrial automation. The SLK performs a slim and compact enclosure as well as a mounting acc. per EN 50041 standard. The outstanding feature is the availability of a multi-supply voltage version covering a range from 24 V DC up to 230 V AC. The new actuator head allows both, horizontal and vertical, actuation. Turning the actuator head by 4 x 90° makes it easy to fit the SLK safety switch to various movable guards. The SLK features two independent safety circuits which monitor the position of the movable guard and the condition of the interlocking. Both circuits carry combinations of up to two forced disconnected contacts each and thus achieve compatibility with different safety systems.
|
|
|
Our huge standard programme with its diversity of housings has the optimal solution for almost any application. The various types of clamp or the dovetail connections directly integrated into the switch mean that the switches can be fitted on almost any type of cylinder. Our range also includes pneumatic cylinder switches for T-section cylinders. All the models can be supplied with dry reed contact with variable power capacities or in the electronic version. If you wish, we can develop completely new customer-specific sensors to meet your requirements.
|
|
|
|
|
|
Position Sensing Solutions
Bimba offers pre-tested Position Sensing Solutions for Bimba actuators. Our solutions provide a cost effective interface between the pneumatic actuators and electrical control systems. Our pre-tested solutions also eliminate costly, time-consuming design and fabrication required if switches are purchased separately and provide an aesthetically pleasing installation.
Both traditional Bimba switches as well as newer generations of Bimba switches are offered to allow for maximum flexibility to fit your application.
The switches perform the same functions as conventional limit switches. They can be used as position indicators, cycle counters, or to confirm operation.
All Bimba switches are designed to sense a magnet that is incorporated into the piston of the cylinder. Magnets are standard in Bimba MRS cylinders, but must be purchased as an option on other Bimba actuators.
A variety of outputs are offered for each switch family including PNP (transistor sourcing), NPN (transistor sinking), normally open contacts, and higher power triac.
|
|
sensors for cylinders
- 2- and 3-wire reed contact, electronic versions as well
- plug or cable connection
- LED indicator
- special designs on request
|
|
|
J+J, a UK ISO9001:2000 quality approved valve actuation specialist company, offer a wide range of butterfly valves fitted with the J+J reversible weatherproof multi-voltage electric actuator. Valves are typically supplied with cast iron body, ductile iron body, stainless steel body and plastic body, with a variety of disc and liner materials. All valve and actuator packages are built and tested in-house.
|
|
KZValve Butterfly valve and electric actuator (photo shown with KZCO's EH2 Medium Torque Actuator)
VALVE FEATURES:
- Valve Body: Epoxy coated cast iron (2-3") Aluminum (4")
- Disk and Stem: 316 SS
- 175 PSI MAX @ 70F (2-3")
- 70 PSI MAX @ 70F (4")
- Manual override capabilities
- EPDM, VITON®, BUNA seats available for varying applications
ACTUATOR FEATURES:
- High quality, durable actuator housing rated: NEMA 6P for waterproof applications and NEMA 7D Ignition Protection applications
- 12/24 VDC and 24 VAC operation available
- Tough aluminum gear box with metal gears
- Actuator housing available with "indicator flag" or with "blank" lid
- Waterproof wire plug connectors
- Private labeling available
Consult our Engineering or Sales staff for application assistance.
|
|
2-Way & 3-Way
Wafer and Lug Style Bodies
For Mixing & Diverting, Hot & Chilled Water, Steam & Special Applications
|
|
Butterfly valve with electric actuator, single phase motor, manual override, visual position indicator and two extra limit switches,
- Flange connection
- DN 50 - 100
- Flow medium: Liquid, viscous and gaseous media
- Pressure range: 0 - 16 bar
|
|
Safety Switch STA
The robust metal safety switch STA is dimension-compatible with the proven EUCHNER safety switches TP and STP in plastic housings. Due to its die-cast aluminum housing and its high degree of protection IP 67, the switch can withstand even extreme ambient conditions. Like the switches TP and STP, the safety switch STA also offers a guard locking and a guard locking monitoring. A great variety of switching elements is available. The contacts can switch a minimum current of 1 mA. Therefore the safety switch STA is suitable for use in safe control systems.
Features
Robust design
3 cable entries
High degree of protection IP 67
LED upon request
AS-Interface version upon request
BG approval (pending)
|
|
|
|
|
|
Application:
Safety switches with separate actuator are suitable for sliding, hinged and particularly removable safety guards, which need to be closed to ensure the necessary operational security. They are also suitable for fitting on profile sections and existing equipment.
In combination with safety control modules all safety switches with class 2 shown in this chapter achieve Control Category 3 or 4 to EN 954-1.
Design and mode of operation:
On the safety switches with class 2, the switching element is not physically connected to the actuator but functionally brought together or separated for switching. When the guarding device is opened, the actuator is separated from the base unit. In the process, NC contacts are positively opened and NO contacts closed.
Enclosure rating of all the safety switches is IP 67. The safety switches can be fitted in any desired mounting position.
Schmersal make both standard and AS-i Safety at Work safety switches with separate actuator.
Or for the standard models click below
|
|
|
|
|
|
SAFETY SWITCH WITH SEPARATE ACTUATOR FW SERIES
These safety switches are ideal to control gates, sliding doors and other guards protecting dangerous parts of machine. The stainless steel actuator is fastened to the moving part of the guard, so it is removed from the switch on every opening of the guard. The switch mechanism guarantees that removing the actuator forces the positive opening of the electrical contacts. Easy to install, these switches can be applied to any kind of protection (with hinge, sliding and removable ones). Besides, the possibility to actuate the switch only with its actuator guarantees that the machine can be restarted only when the guard has been closed.
- Polymer housing, three M20 or M16 knock out conduit entries
- Protection degree IP67
- 6 contact blocks available
- 8 stainless steel actuators available
- 30 N actuator extraction force versions
- Silver contacts gold plated versions
- Cylindrical or slotted fixing holes
- Cover with hinged opening and with only one fixing screw
|
|
|
Bernstein presents the innovative safety switch SLK as a solution to safety applications in industrial automation. The SLK performs a slim and compact enclosure as well as a mounting acc. per EN 50041 standard. The outstanding feature is the availability of a multi-supply voltage version covering a range from 24 V DC up to 230 V AC. The new actuator head allows both, horizontal and vertical, actuation. Turning the actuator head by 4 x 90° makes it easy to fit the SLK safety switch to various movable guards. The SLK features two independent safety circuits which monitor the position of the movable guard and the condition of the interlocking. Both circuits carry combinations of up to two forced disconnected contacts each and thus achieve compatibility with different safety systems.
|
|
Limit switches
Many on/off applications require an indication for closed and/or open position.
SOMAS offers a wide range of alternative solutions including micro-switches as well as proximity switches.
|
|
The SIM08 connection box provides an optimal solution for connecting all type of cylinder end-stroke switches, with the following advantages:
Security. Front and rear signals are usually joined in two series. Yet, this solution doesn’t provide any protection to an eventual double signal or connection error and make it difficult the identification of a broken switch. The SIM08 box is equipped with an alarm to any double signal and a led light for each switch permits a fast detection of a non-working switch even if the signal is in series.
Versatility. The box can be fixed directly on the mold. From the box to the press machine there’s a unique connector (IP67 water resistance) with a 5 mt. cable. On the other side of the cable the end user can connect any type of connector - as per his Company standards - with min. 6 pins.
|
|
| ... products without technical information |
| |
|
The pre-assembled and pre-moulded M23 x 1 round connectors are ideally adapted to our M12 x 1 actuator/sensor boxes for which they are used as connection cable. There are 12- and 19-pole versions with various pin configurations as well as field-wireable 12-, 16-, and 19-pole connector types.
|
|
Areas of use
Moulded connections and inter-connections for all types of automated industrial equipment
The Senstronic range consists of:
- Lead M8 with 3 contacts
- Lead M12 with 3, 4 or 5 contacts
- Lead M23 s with 9 or 19 contacts
- Lead for 24 V solenoid valves
|
|
Features and Benefits
• Pilot operated spool valve technology,
3/2 or 5/2 convertible, by the user.
• High Flow Design: Cv = 1.4, Kv = 1.2
• Integral Push Button Manual Override is standard
• LED power indicator is standard
• Rapid response time up to 5 cycles per second
• Duty Cycle: 100% Continuously Rated for
multimillion cycle life
• Integrated exhaust ports for variable speed control
in 3/2 configuration
• Operating Pressure 37 - 150 psi (2.5 - 10 bar)
NAMUR Interface Valves ideally suited
for direct actuator mounting
The Universal NAMUR Series Valves from Alcon are
perfect for piloting single and double acting actuators
used on process valves such as butterfly and ball valves.
Markets Served
• Offshore
• Petrochemical and Chemical Industries
• Paper/Pulp Recycling
• Food Processing
• Water Treatment Plants
|
|
|
|
see the results for the following category : 
