|
|
Faucet with floating sphere 2 parts
DNN (Nominal Diameter): 4-200 (other diameters and pressures on requests)
PN (Pressure rating): 6-160
TECHNICAL MAIN FEATURES
- Execution: A105, ISO, ANSI 515 or AISI 316
- Can be gone up with all types of actuators
- Connection of the actuators Iso 5211
- Anti-static
- Direction of the fluid in the two directions
Technology: Forged
Principle: 2 parts
Markets:
Chemistry
Hydroelectric
Oil/gas
Connection: With flanges
Type of connection:
- THUS
- PN/ISO
Passage:
- Integral
- Reduced
|
|
Faucet with shaft sphere
DNN (Nominal Diameter): 25-800 (other diameters and pressures on requests)
PN (Pressure rating): 6-420
TECHNICAL MAIN FEATURES
Execution: A105 or 316L
Double floating seats
Gaskets anti-blow of ram and replaceable
Triple seals
Anti-static
Fire-resistant according to API standard 6 FA/API 607/BS6755
Circulation of the fluid in the two directions
Technology: Moulded or Forged
Principle: Shaft sphere
|
|
Valve doubles beating between flanges
DNN (Nominal Diameter): 50-1200
PN (Pressure rating): 10-420
Protector of circuit industrial Generals, hydrocarbons and of process
TECHNICAL MAIN FEATURES
Assembly between-flanges
Excel hydraulic output
Compactness
Sealing ensured by an excellent distribution of the force of spring on the leaves guaranteeing a good support on the seal of the seat
Weak pressure losses
Progressive opening controlled by spring at double dot of support
Leaves stainless or bronzes
Vulcanized Joints NBR gorges some on the seat
Horizontal and vertical operation ascending
Technology: Moulded
Principle: Double leaf
|
|
Valve valve
- DNN (Nominal Diameter): 15-300 (other diameters and pressures on requests)
- PN (Pressure rating): 10-420
Technology: Moulded or Forged
Principle: Valve
Markets:
- Chemistry
- Hydroelectric
- Oil/gas
Connection:
- Has flanges
- To weld
- Tapped
Type of connection:
- ANSI
- BSP/NPT
- BW/SW
- PN/ISO
|
|
NV 50 is an isolator for integration into platforms with attachment options on one side wall or at the bottom. The is fixed with the centrical load rod. In consequence of the prismatic basic shape these isolators can be integrated in substructures of vibration-sensitive instruments and are ideal to use as OEM-elements.
If an installation in the inside of the instrument is not possible the dampers can be masked with an optional available blind made of polished stainless steel. The NV 50 hold brilliant isolation features in the lower frequency range despite the low contruction volume of about one liter.
The resonance frequency lies horizontal under 2 Hz and vertical at 2 Hz. The levelling range is +/- 3mm and can be set up with the height controllers HR2. A permanent supply of compressed-air is necessary.
|
|
The NV150 air-springs are the pneumatic isolators for the cplusw damping tables and are inserted into their base frame.
But as an OEM-product the NV150 can be used in many ways. Because of an upper stopper of the piston the design offers a maximum safety against an accidentally compression overload.
A permanent supply of compressed air is necessary for operation as well as a compression or rather a height controller for setting up the working height in between the levelling range of +/- 4mm The resonance frequency is about 1,7 Hz in horizontal directions and in vertical direction under 2,5 Hz.
CplusW offers support for system integration into customer products or special applications. Sets composed of three, four or even more NV150 air-springs will be delivered with the necessary number of height controllers HR2.
NV150 systems do not need any special maintanance after the initial setup.
|
|
Larox Peristaltic Pumps for Dosing
The innovative Larox Peristaltic Pumps for Dosing (LPP-D) set a new industry standard for peristaltic pump technology. Designed and manufactured for the industrial marketplace, they are ideal for pumping diverse slurries and dosing a wide range of media.
|
|
|
LPP peristaltic hose pump is a new innovation in the world of peristaltic pumps. It is capable of handling the heaviest, most abrasive and aggressive slurries in mining and process industries as well as high viscosity fluids in hygienic and foodstuff applications. The completely new operating principle and the advanced adjustment mechanism give LPP extremely long hose life. The clever operating principle also allows LPP to operate continuously at high speeds and flows without overheating. The unique hose fixing system with reliable flanges at both ends of the hose enables secure and fast replacement of the hose. LPP can be easily installed in-line, because of its smart construction. The high flow capacity LPP makes a smaller pump size possible and the pump requires less space compared to the conventional peristaltic pumps. LPP saves energy and produces economic value in production and cost efficiency by reducing maintenance and upkeep costs. Currently LPP pump family consists of three sizes DN 25, DN 40 and DN 65 for working pressure max. 10 bar with flow capacities up to 20 m³/h. LPP can also be equipped with a sophisticated control unit. Taylor made solutions are available outside the standard product range.
|
|
|
The Universal Mag Drive is the ideal sealing technology for critical liquid containment applications within Viking’s Universal Seal product line. It is dimensionally interchangeable with Viking's Heavy Duty bracketed and Universal Seal pumps, allowing for easy upgrade from packed or mechanical seals to sealless technology. The Universal Mag Drive’s hermetic, static sealed canister provides the highest level of liquid containment available by eliminating traditional dynamic shaft seals. It also eliminates housekeeping issues and downtime due to seal failure. This product is designed to handle a broad range of applications requiring continuous duty at pressures up to 200 PSI (14 Bar).
|
|
|
Viking Mag Drive® sealless internal and external gear pumps eliminate leakage and maintenance associated with shaft seals. For use with all hazardous/toxic fluids, hard-to-seal liquids and for 24/7 operations which cannot afford unscheduled downtime due to seal failure. Some models allow reversible direction of flow, and temporary run-dry capability. May be close-coupled to IEC or NEMA motors, or long-coupled with optional bearing carrier. ATEX conformity available.
|
|
Flow Indicators are designed for continuous monitoring or intermittent use commissioning and
servicing hydraulic systems up to 420 bar, 6000 psi. The large clear 63mm diameter dial ensures that quick checks can be made to determine pump performance and setting of flow control valves. They can be used on mobile and industrial hydraulic circuits. Also lubrication and coolant systems using oil.
These direct acting flow indicators can be installed in hazardous areas or on applications where no power is available. The flow indicator design ensures good reliability and minimises the effects of contamination.
|
|
The RFIK mechanical hydraulic tester provides the ideal solution for servicing and commissioning
hydraulic circuits on agricultural and other mobile machinery.
The kit comprises of a direct acting flow indicator with built in thermometer, a loading valve and a pressure gauge all built into a strong steel case with a removable lid.
The unit is self contained and requires no electrical power. The dials are clear and easy to read.
Installation is extremely simple and the test kit can be connected into either the pressure or return lines. The loading valve and pressure gauge allow a progressive build up of system pressure in complete safety.
The test kit provides the service engineer with quick, accurate and simple performance testing of pumps, motors, valves, cylinders and complete hydraulic
circuits.
Note: This unit is not designed for permanent installation.
|
|
The innovative hydraulic pipe measuring points serv-Clip® for the MAINTENANCE OF YOUR HYDRAULIC SYSTEMS.
No only better …different!
* QUICK INSTALLATION (ONLY 3 MINUTES) - NO NEED TO CUT OPEN PIPES
* Type 1 NO SHUTDOWN of installations for mounting on pressurized pipes
installation of pressure switch, gauge and sensors, particle counters
* Type 2 SHORT SHUTDOWN of installations for mounting on NON-pressurized pipes.
add. to type 1- installation of flow rate, leackage, pressure, temperature and aqua sensors.
* Up to 630 bar / 9100 psi – screwed coupling M 16 X 2
* Particle measurement according to ISO or NAS classes
Technical Data :
* for diameters 10 - 42 mm / Tube (OD) 3/8" - 2"/ Pipe (ID) ¼" to 3"
* Working pressure up to 630 bar/ Steel wall thicknesses up to 5mm
* Working temperature from -40°C to +120 °C
* Viton O-Ring in leak proof clamp up to 200°C
COMBINE SERVCLIP WITH OUR FLOW RATE AND LEAKAGE SENSORS FLUID-CHECK AN ECONOMICAL AND INNOVATIVE CHOICE FOR YOUR MAINTENANCE.
|
|
After several successful tests conducted in combination with MARKHIP Ultrajack thermoplstic hose, OLMARK Quality Control system guarantees the full suitability of 1/4" MU crimped fittings with applications of 800 bar working pressure, coupling the advantages of a quick and easy NO-SKIVE assembly with high reliability in high or very high pressure applications.
Characteristics:
- suitable for hard applications, resistant to high and very high working pressures
- tested with more than 500.000 cycles of pulsating pressure
- complying to and exceeding EN/ISO international directives
- total RELIABILITY, Olmark Quality guaranteed
OLMARK Technical Department is available to provide more in-depth information and technical details with regards to areas of application.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
The humidity and temperature transmitters for industrial applications measure relative humidity and temperature f.i. in air and other non-aggressive gases within a (working) temperature range up to 200°C or under pressure up to 25 bar.
Galltec+Mela offer as well versions for applications in gases containing ammonia or transmitters in die cast housing for outdoor use.
|
|
The humidity and temperature transmitters for industrial applications measure relative humidity and temperature f.i. in air and other non-aggressive gases within a (working) temperature range up to 200°C or under pressure up to 25 bar.
Galltec+Mela offer as well versions for applications in gases containing ammonia or transmitters in die cast housing for outdoor use.
|
|
Forged valves with direct passage
- DNN (Nominal Diameter): 10-50
- PN (Pressure rating): 130-420
Execution: Class 800 to 2500
Technology: Forged
Principle: Oblique seats
Markets:
- Chemistry
- Engineering
- Maintenance
- Oil/gas
Connections:
- Has flanges
- To weld
- Tapped
Types of connection:
- ANSI
- BSP/NPT
- BW/SW
- PN/ISO
|
|
Balancer
The rope balancer is a pneumatically powered hoist unit. Thanks to the low manual force required for the horizontal movement, these units are the optimum solution for careful load balancing and positioning. In particular complicated positioning and assembly tasks can be performed easily and safely with this unit. Rope balancers make it possible to reposition loads quickly in short cycles.
There are two different basic units:
D-BP 55 Load capacity 50 kg (at 6 bar)
D-BP 110 Load capacity 100 kg (at 6 bar)
|
|
... see all the products in the category
Hoists
|
Roscamat 200; Capacity M2-M14 (M16)
This machine consists of a pendular parallelogram that is balanced by a pneumatic spring, plus a radial arm.
The gas spring and radial arm assembly fixes the motor head and keeps it perpendicular to the working area. The motor is equipped with a quick-change system and is rotated by compressed air that has previously been filtered and lubricated by a unit for that purpose.
Taps and shank tooling fit to the motor's quick-change system by means of tapholders.
|
|
Our pneumatic AirLiquid PN-Module has been improved for use with liquids. Sealing material is Viton (FKM / Fluorcarbon rubber) providing high resitance against oils, gasoline, diesel, biodiesel or ethanol. The Module is available with one or two pneumatic nipples. Brass-valves, locked on socket side, ensure reliability, efficiency and high mechanical firmness within the durable industrial environment. GES can provide three versions of this module, including locked valves on both sides and a push/pull hose-connection mechanism for rapid connection/disconnection. With increased perfomance for the same price the AirLiquid PN-Module now replaces our past Pneu-Module.
Find more information on the datasheet and on www.ges-electronic.de
|
|
for heavy loads up to 30 tons!
GKS-hydr. jacks for professional applications - worldwide approved and robust design.
- Prominent features like high-quality material, safty valve ('overload protection'), wast-wax cast safety toe, quick release connector for external pump and stable swivel feet incl. solid rubber tires.
- Our hydraulic jacks approved from a German technical inspection authority and bear German test mark ‚CE'/'GS' and American ‚ANSI/ASME'.
- Every single jacks passes through a sequences of tests before it is delivered and it is supplied with a test report and label indicating the date for its next GKS-inspection.
|
|
|
