|
|
| Rotary plug valves suitable to control high flow rates with high rangeability. The triple eccentric seat/plug design guarantees zero leakage and low initial breakaway torques when opening and closing. |
|
Temperature Control Valve - Series 36R
Self-Contained Valve/Actuator/Sealed Thermal System in One Compact Unit, Direct-Acting/Reverse-Acting
Control Valve - Series Hi-Flow
Linear Characteristics, 1/2" to 4" Sizes, 2-way or 3-way
Pneumatic Pilot Valve - Series 2V
2-way or 3-way, Ideal for Air/Water/Gas/Steam Service, Bronze Body |
|
Two Proportional Flow Control Rates with One Valve: Hayward ProFile2 corrosion resistant, proportional control ball valves provide two linear flow curves; one for fast opening and one for slow opening. The percentage of flow through the valves with either flow curve is equal to the degree of opening. As the valves are opened or closed, the flow varies in direct proportion to the valve opening. This permits predictable, accurate control of the downstream flow rate with a 1/4 turn valve.
Unique Design "Characterized" Ball: These valves utilize a unique, patented ball with a special "characterized" opening that results in the linear flow rate change. Valves are shipped with the ball installed so that the smaller opening enters the flow first, creating the slow open rate. To switch to the fast opening rate, simply reverse the ball in the valve. With the larger opening first, the flow starts fast with slower, more controlled changes as the ball is turned to "full open".
Perfect With Positioners: Hayward ProFile2 Proportional Control True Union Ball Valves can be supplied with optional electric or pneumatic actuators with positioners for automated modulating service applications.
Never a Problem with Corrosion: Because of their all plastic construction, Hayward ProFile2 ball valves will never rust or corrode. They can survive corrosive environments and harsh weather conditions without the need for painting or expensive epoxy coatings.
|
|
Ball Valve Type 546
Flexible high quality ball valve with many additional features for all applications
Ball Valve Type 375
The perfect ball valve for non critical applications
Ball Valve Type 343
Reliable 3-way ball valve for diverting and mixing-processes. Available in horizontal and vertical direction
Ball Valve Type 323
A professional ball valve for exact dosing of media
Ball Valve Type 322
Easy and safe valve for laboratory applications
Ball Valve Type 353 - 355
The standard ball valve for all water applications |
|
Applications:
Suitable for the following processes: hand cutting, sheet
metal cutting, rivet cutting, heating and gouging. |
|
- BALL VALVES :
- BRASS VALVES
- CAST IRON VALVES
- STAINLESS STEEL VALVES
- CARBON STEEL VALVES
- PVC VALVES
|
|
ART. 424
2-WAY FULL-BORE THREE PIECE CASTED STAINLESS STEEL BALL VALVE, THREADED-ENDS, BUTT WELD OR T-CLAMP
ART. 429
2-WAY FULL-BORE THREE PIECE CASTED STAINLESS STEEL BALL VALVE, THREADED-ENDS OR BUTT WELD
ART. 434
2-WAY FULL-BORE STAINLESS STEEL BALL VALVE, DIN 11851 FEMALE THREADED-ENDS
ART. 445
3-WAY FLAT BODY FLANGED STAINLESS STEEL BALL VALVE, “L” PORT
ART. 448
3-WAY FULL-BORE THREADED-ENDS STAINLESS STEEL BALL VALVE, “L” PORT
ART. 450-451
3-WAY FULL-BORE THREADED-ENDS STAINLESS STEEL BALL VALVE, “T” OR “L” PORT
ART. 460-461
3-WAY FULL-BORE FLANGED STAINLESS STEEL BALL VALVE, “T” OR “L” PORT
ART. 464-465
3-WAY FULL-BORE STAINLESS STEEL BALL VALVE, “T” OR “L” PORT, DIN 11851 FEMALE THREADED-ENDS
|
|
TORK Electric actuated valves are two series
1. Electric actuated ball valve
2. Electric actuated butterfly valve
TORK Electric actuated ball valve,T-EAV900Serie, are two main parts, a quater turn,90 degree turn electric actuator and ball valve. Out put torque value of electric actuator (Nm) , must be more 25%
than out put torque value of ball valve (Nm).
application: ball valves,butterfly valves,dampers,plug valves , on-off or proportional control |
|
Flow Patterns:
Hayward Manual Three-Way Ball Valves come standard with a two port "TW" ball allowing for three flow configurations within 180 degrees of rotation. With the bottom port as the inlet, the flow can be directed out the left port, out the right port or shut off. Hayward Actuated Three-Way Ball Valves come standard with a three port "NT" ball allowing for two flow configurations within 90 degrees of rotation. With the bottom port as the inlet, the flow can be directed out the left port or out the right port, there is no shut off position. A "TW" ball, used with with the proper electric actuator, adds what is typically called a "center off position" to the "NT" flow pattern of actuated valves. An optional "TP" ball, used with either manual or actuated valves, allows flow through all ports at the same time or flow shutoff.
True Union Design:
This makes these valves very easy to maintain by allowing for easy removal from a piping system without breaking down the piping connections. Just unscrew the three assembly nuts and lift the valve body out of the line.
Easy to Actuate:
A manual valve can be easily automated. Just remove the handle and install the optional actuator mounting kit. The mounting saddle is integrally molded into the valve body. For rock-solid actuator mounting, the valve incorporates a unique design whereby the mounting bracket mounts directly to the valve body. This assures proper alignment of the actuator to the valve without creating any damaging side loads to cause premature stem seal failure.
No Metal, No Corrosion:
Hayward all plastic three-way valves contain no metal parts. The valves will never fail because of corrosion and they do not require painting or epoxy coating to stand up to aggressive environments. |
|
Rugged, Compact Design:
Hayward's rugged, low cost QIC2 all plastic PVC ball valves incorporate many design features found only on higher cost ball valves. Features such as PTFE seats, full porting and a 150 PSI pressure rating are all standard on every size of QIC2 ball valves.
Cost Sensitive Applications:
The QIC2 ball valve is perfect for OEM and other applications that require a reliable ball valve at an economical price. The QIC2 valve has been designed and tested to make certain it will perform year in and year out in the most demanding applications without leakage or failure. The internal components of the QIC2 ball valve are completely encapsulated inside the one piece valve body which means that the valve never requires adjustment. The QIC2 valve is ready to be put into service right out of the box.
Lightweight and Compact:
QIC2 lowcost ball valves are designed to fit into spaces too small for other valves. They are about 1/3 the overall size of a true union ball valve and they weigh an average of 50% less. This makes them ideal for skid mounted and other applications where space and weight are critical considerations.
Can't Rust, Won't Corrode:
Their all plastic construction means that they will never fail, stick, or jam because of rusted or corroded parts. And they'll work in places and environments where metal valves must be painted or coated just to survive. |
|
| ... products without technical information |
| |
| Butterfly control valves suitable to control high flow rates. The floating or elastic seat rings and the multi-eccentric design together with the angle-seated vane guarantee zero leakage and a movement of the plug without stick-slip effects. |
|
| MAXON flow control solutions keep thousands of plants and products moving every day. With a wide breadth of solutions from intelligent mass flow control to economical mechanical control, our flow and ratio control valve products provide dependable, accurate control of air and fuel world wide. We invite you to browse the following product information for your flow control needs. |
|
Butterfly valves
DN 15 – 50; valve bodies in PVC-U, brass, DN 15-250 PES, DN 15-2000 cast iron, S. G. iron, cast steel, stainless steel; connections to DIN, ISO, AMS, BS, ASTM, JIS), LUG and Wafer type butterfly valve bodies; seal materials in CSM (Hypalon), NBR (Perbunan), FPM (fluorine rubber), EPDM, PSI, Nitrile, Carboxylite, natural rubber, Butyl, Silicone, PTFE, Ultraflon, metal sealing, fire-safe; manual, pneumatic and motorized operators; check valves
|
|
Whatever you want from a Bulk Materials cut-off valve you’ve got it with Clyde Materials unbeatable Dome Valve® - the cost effective valve solution.
The Clyde Dome Valve®, widely regarded as the original and best material handling valve in the world, offers exceptional life from only a single moving part. The Dome Valve® is recognised as a low maintenance, long life solution that can last at least 1 million cycles between maintenance inspections. It has the ability to cut through static or moving columns of material and is pressure-tight, ensuring a consistent pressure tight seal is created when the valve is in the closed position, but in the open position it provides an unrestricted full bore opening for the best product flow characteristics possible. The Dome Valve® can also be used as a line, vessel or reactor isolation valve.
The Dome Valve® enhances other technologies from Clyde Materials Handling, a leading provider of pneumatic injection, conveying, materials handling & vacuum cleaning solutions.
The solutions we create for our customers generate many benefits and are backed by three decades of domain knowledge, expertise and a track record of generating exemplary success.
Dome Valve® sold in the United States under the trade name ‘Spheri Valve’ |
|
WAFER TYPE BUTTERFLY VALVE Z 011-A
FEATURES
- Absolutely tight sealing with flow in either direction
- The valve body and disc are accurately machined which results
in low operating torque, long service life and reliability.
- Triple shaft bearings prevent shaft deflection and guarantee
optimum guidance even after many years of operational service.
- Four flange mounting holes ensure correct valve location.
- Single flange mounting is possible (please request details
from our Technical Department).
- Can be installed in any desired position.
- Maintenance-free
- Can be disassembled, material-specific recycling possible
GENERAL APPLICATIONS
- Chemical and petrochemical industries
- Water and wastewater technology
- Pneumatic materials handling technology
- Shipbuilding
- Power generation industry
- Food industry
- Civil engineering
- For paint and laquers, a silicon-free Version is available. |
|
| Used for air, gas and oil proportioning control, the MICRO-RATIO® Oil and Gas Valve assemblies have a multiple screw cam assembly. This oil flow valve's assembly provides mechanical adjustment capabilities to the air/fuel ratio at each valve position throughout the entire capacity range of your burner system. This gas valve provides a fully adjustable throttling range and is designed to operate over the extremely wide turndown capabilities of Maxon's modern industrial burner systems. |
|
Features:
Rated at 150 PSI
Full Body V-Notched Liner
Fully Supported Flange Bolt Holes
Stainless Steel, Blowout Proof Shaft
FPM, EPDM or Nitrile Liners
Wafer Body Design
Two-Year Warranty
Options:
Stem Extensions
Gear Operators
Electric or Pneumatic Actuators
PVDF Discs
2" Square Operating Nut
Titanium Shaft
Lug Body Design
|
|
Remote Control Valve:
Hayward's Pneumatically Actuated Diaphragm Valves are designed for the reliable, remote control of liquids in piping systems. They are suitable for both clean and slurry type fluids at pressures up to 150 PSI.
Position Indicator:
You never have to guess if a Hayward Diaphragm Valve is in the open or closed position. A visual position indicator comes standard with every valve.
Powerful Actuator:
The actuator used to operate the valve, while lightweight and compact, is still powerful enough to open and close the valve at all internal pressures up to the full rated pressure of the valve,150 PSI.
No Corrosion Problems:
Hayward's Diaphragm Valves stand up to the most aggressive fluids and they will never rust, corrode or contaminate the process fluid. Even the actuator housing is plastic and requires no failure prone coating or painting.
Modular Options:
Several modular design options are available. This concept is very cost effective because the actuator can be configured exactly for a specific application using only the options required. You never have to pay for options you do not need.
|
|
| Pipe ends are calibrated during the flanging process to create a smooth connection. This ensures a further protection against wear and tear. |
|
|
|
see the results for the following category
