|
|
3 WAY/4 WAY BALL VALVE
THREADED END OR FLANGED END
WITH OR WITHOUT (DIRECT) MOUNTING PAD ISO 5211
1000 WOG OR DIN PN16/40/ANSI 150L
STANDARD /FULL BORE
PORT TYPE: L/T/X
|
|
Series 100 - DN04 to DN50
Body, ball, stem : steel
Fields of application:
hydraulics, particularly in construction industry and agricultural machinery, mining industry, paint industry. (Seats and seals adapted to application)
|
|
TRIFLUX series is available both with L and T bore and allows to divert the flow in all directions including the inlet shut off, applicable to each of the three threaded ends. It is suggested for gas and water distribution, industrial and civil heating, water plants at medium pressure, hydraulics and pneumatic, non aggressive media and vacuum.
|
|
|
|
|
|
Flow Patterns:
Hayward Manual Three-Way Ball Valves come standard with a two port "TW" ball allowing for three flow configurations within 180 degrees of rotation. With the bottom port as the inlet, the flow can be directed out the left port, out the right port or shut off. Hayward Actuated Three-Way Ball Valves come standard with a three port "NT" ball allowing for two flow configurations within 90 degrees of rotation. With the bottom port as the inlet, the flow can be directed out the left port or out the right port, there is no shut off position. A "TW" ball, used with with the proper electric actuator, adds what is typically called a "center off position" to the "NT" flow pattern of actuated valves. An optional "TP" ball, used with either manual or actuated valves, allows flow through all ports at the same time or flow shutoff.
True Union Design:
This makes these valves very easy to maintain by allowing for easy removal from a piping system without breaking down the piping connections. Just unscrew the three assembly nuts and lift the valve body out of the line.
Easy to Actuate:
A manual valve can be easily automated. Just remove the handle and install the optional actuator mounting kit. The mounting saddle is integrally molded into the valve body. For rock-solid actuator mounting, the valve incorporates a unique design whereby the mounting bracket mounts directly to the valve body. This assures proper alignment of the actuator to the valve without creating any damaging side loads to cause premature stem seal failure.
No Metal, No Corrosion:
Hayward all plastic three-way valves contain no metal parts. The valves will never fail because of corrosion and they do not require painting or epoxy coating to stand up to aggressive environments.
|
|
GENERAL DESIGN
The floating ball is held between two pre-compressed
seals which ensure a tight, non-leak fit at both positive
and negative pressures. The ball’s rotational angle is
constrained by a stop pin and disc.
Cranked handles are incorporated to provide good
clearance for the operators hands.
Flat handles can be provided on request.
FEATURES Full bore valves provide an unrestricted flow path for
negligible pressure drop. Floating ball on pre-compressed seals minimises
wear and provides an excellent seal at positive and
negative pressures. High working pressures - see table on page 59. Operating temperatures from -20°C to +100°C.
1
4 Open to close in
/ turn (90°).
|
|
3-way Plug Valves
TUFLIN® 3-way Plug Valves for complex piping systems
The design and sealing principle of the TUFLIN® 3-way plug valve is based on the proven 2-way plug valve design. All configurations are suitable for more flexible and complex piping systems and applications.Typical applications of multiport plug valves:
* as changeover valves for pressure relief duties
* for by-pass or mixing operation purposes
* as switchover valves for filtration circuits
* in the pulp and paper industry
* in filtration or drying plants
|
|
| ... products without technical information |
| |
The Advantages at a Glance
Customer-specific design
Compact design and smaller envelope dimension is achievable with the Steripur Series actuators
Combination of many different nominal diameters
Optimized drainability
Minimized dead leg
Reduces surface contact, hold up volume and cross contamination of the product
Reduction of fittings, tubing and field welds in the system
Reduces qualification and validation documentation requirements
All end connections and materials are
|
|
The Solution For High Flow& High Pressure Requirements
- Flows up to 240 gpm
- 5000 psi (6000 psi intermittent)
- Pneumatic, hydraulic or solenoid operated
- Full Cartridge Style Valving
- Low Leakage
|
|
|
Multiport gauge valves facilitates different positioning of the pressure gauge or pressure switch without disturbing the main line. One 1/2" male or female inlet & three 1/2" NPTF outlets ports is the standard configuration of any multiport guage valve
|
|
Solenoid valve with BRASS and STAINLESS STEEL 316 body.
3 ways Normally closed and universal.
Seals: Buna (NBR), Viton (FKM), EPDM, Ruby.
Coils: Standard, Bistable, Explosion proof
Port size 1/8", 1/4" and socket.
Fluid temperature up to 180°C.
The 3 ways direct acting range is suitable for actuators control, and in application directly in contact with the process fluid (ais, gas compatible with valve materials, water, steam, liquids compatible with materials). THe class H coils permit to work up to 180°C and bistable coils allow low energy consumption for portable applications or where temperature increase must be avoid. The explosion proof coils works in potential explosive environments.
|
|
Technical data
Fluid: water, air, neutral fluids
Ambient temperature: -10 to +50 [°C]
Voltage: 230 [V], 50 [Hz]; 24 [V] DC
Coil power: 8,5 [VA]; 6 [W]
Protection enclosure: IP 65
Duty rating: always
Mounting position: optional
Materials
# seal - NBR
# body - brass
|
|
|
|
|
|
In an ever increasing typology of applications, is by now necessary avoid the oxidation involves any part of plant and instrumentation.
To meet this requirement, SIRAI® has designed a new solenoid valves series, characterized by the high quality of body material, made in PPS.
Besides solving definitely the problem of oxidation, these solutions allow to reduce the limescale.
The choice of an high quality polymer, particularly resistant to chemical and physical aggressions, allows to use these valves for a wide range of fluids, including low-pressure steam. PPS, furthermore, offers a good level of tolerance to ultraviolet rays and flames exposition.
These features, together with other peculiarities of the project, make these valves the best solution for several applications, especially in the field of small sterilizing autoclaves.
Solenoid valves are available in different versions: 2/2NC, 2/2NO, 3/2, 1/8” threaded or barbed ports. Also the electrical part draw up at the same level of high quality standards.
The compact coil, with a perfect balance between power absorption and magnetic performance, is available in “F” or “H” class, also homologated according to the main international standards.
|
|
|
Alcon 3-way General Purpose Solenoid Valves are ideal for mixing, diverting and venting applications. The U31, U32 and U33 Series feature a compact design available in a wide range or orifices. These valves are zero pressure rated and offer a choice of valve materials for its body and seals.
|
|
normally closed
TYPE: B919/920/921
TECHNICAL SPECIFICATIONS
Media: water, oil, air
÷ +130°C
Media temperature: -10°C
Ambient temperature: -10°C
÷ +50°C
Body material: brass (CW617N EN 12165)
Orifice material: stainless steel (AISI 303 EN 10088-3)
Operator material: stainless steel
Seal material: FKM
Coil power: AC 10VA (holding)
AC 16VA (inrush)
DC 7W
Protection class: IP 65 (with connector)
Standard manual override
|
|
|
The VV061 series is a direct operated 3-way solenoid valve designed for 4 and 8 station units with integrated compact manifold, valve, circuit board, base and fittings forming a single compact unit. VV061 series model has an optional power saving circuit that can be used for long-term continuous duty. This unit is available with one-touch or barb fitting and an optional connector cable with lengths of 300, 600, or 1000mm.
|
|
Media: air – water – gas – light oil - vacuum
Pressure range : 0 to 15 bar max
Media temperature : 100° C max
Ambient temperature : -10° to +50° C max
Media viscosity : 40 centistokes max
Mounting : any position
Weight (including coil) : 280 g
Opening or closing time : 20 milliseconds maximum
|
|
|
3/4" high capacity (DN22, kv=105 l/min) universal solenoid valve, operating pressure up to 2 bar in all directions (3/2 NC, 3/2 NO, collector, diverter).
|
|
3/2 way Solenoid Valve
direct acting solenoid valve DN3, fast acting, for neutral medium like air and water
port connections G1/4, body in brass, NBR seal,
circuit function: power free - outlet balanced, Pressure range 0 - 10.0 bar, Voltage tolerance ±10%,
Ambient temperature max +55°C / 131°F, with flat seal and fixing screw
Standard version
Protecting class IP65, with cable plug for cable-ø7 mm, Medium temperature: 0°C / 32°F up to +80°C / 176°F
|
|
Features :
‧ATEX Ex certified components approved for hazardous locations:
‧Corrosion resistant construction with standard manual override.
‧Direct mounting conforms to Namur VDI / VDE 3845 standard.
‧5/2 and 3/2 function selectable via 180° rotation of single adapter plate.
‧Exhaust feedback - provides spring chamber with instrument air preventing corrosion.
‧Wide operating temperature range -4°F to +122°F [-20°C to +50°C]. Optional Low Temp to -40°F [-40°C]
‧Also available: Intrinsically Safe and CSA/FM Explosion proof.
|
|
| ... products without technical information |
| |
|
|
