|
|
SchuF invented the Lift Plug Valve in 1914. Since then, it has delivered plug valves to the Chemical, Refinery, Delayed Coking, Polymer, Cement, Mining and Power industries.
Lift Plug valves as suitable for a variety of applications such as isolation, or switching where the medium is highly abrasive, or operating conditions are severe - such as very high temperatures.
SchuF produces a special range of lift plug valves for the coking industry - the IsoPlug and SwitchPlug range. |
|
Rising-plug style valve for process instrumentation applications. Provides users with a highly reliable valve solution for applications where contaminated media can lead to premature valve failure.
The rising plug valve's ‘straight-through’ design supports higher flow rates than needle valves, helping to avoid the build-up of deposits.
The HRPV Series valve features an 8-turn actuation cycle, with a rolled spindle thread and smaller sealing area - lowering the torque required when controlling high pressure fluid flows and providing a long life. It’s rated to 10,000 PSI (689 bar) - a typical actuation torque of just 25 pound-inches (2.82 Nm) of torque is required.
Two types of body are available: inline 2-port design, and an inline design with a standard 3-port gauge interface at one end. In its smallest 1/4 inch female NPT version, the overall body length of the compact valve measures just 60.5 mm.
As standard, the valve is provided with PEEK seats, which allows the valve to operate up to 200+ degrees C, and resists wear and damage from the kind of aggressive media encountered in oil and gas processing environments.
Fabricated from 316 stainless steel as standard, HRPV Series valves can optionally be specified in a wide range of exotic alloys.
|
|
| The conical centraggi are mechanical members who allow to the precise centratura of slabs of the stamp or others members been involved in the transformation process. |
|
To complement the Pipestoppers™ range of nylon expanding plugs, we offer all sizes of aluminium plugs.
These are provided in sizes from 1.5" upwards and are suitable for more arduous duties such as immersion in chemicals and/or higher temperatures.
They are manufactured with 1/2", 1" and 2" outlets.
1/2" Outlet for plugs sizes up to 6"
1" Outlet for plugs sizes 6" to 18"
2" Outlet for plug sizes of 20" and greater
The standard seals are made from natural rubber and special rubber seals are available for chemical applications where greater resistance is required.
(alternative rubber rings options are: Silicone, Nitrile & Viton)
Click Download for a PDF on alternative rubber properties.
All plugs conform to British Standards BS8005 for low pressure testing and sealing of pipes.
The basic principle - effective sealing is simple, insert the plug into a pipe opening and tighten the wing nut clockwise. The rubber ring will expand and provide a positive seal. To remove simply reverse the process.
Tightening the wing nuts is easy with the Pipestoppers patented friction free washer.
Typical applications:
Are usage for plumbing operations in a wide variety of industries, including domestic and industrial water and drainage systems.
Also for ducting and conduit, swimming pools, masking in painting and casting industries, as weld purge plugs for stainless steel pipewaork fabrication and many others. |
|
Manufactured from nylon, an engineering polymer resistant to salt water corrosion and many chemicals gives them a high quality leak tight seal in the selected orifice.
There are two types:
A solid shaft version with five sizes from 0.5 inch up to 1.5 inch.
and
A hollow shaft version with eleven sizes from 0.5 inch to 6 inch inclusive.
All plugs have:
A central spindle/shaft on which two plates are fitted with a natural rubber tyre/ring between them a wing nut on the shaft moving the two plates together compressing the tire and making the seal in the pipe or orifice.
Natural rubber tyres which can be substituted for different rubbers where additional chemical and/or heat resistance is required.
Alternative rubber rings options are: Silicone, Nitrile & Viton)
Click Download for a PDF on alternative rubber properties.
The hollow shaft version with sizes from 0.5 inch to 6 inches allows:
Water or gas to be injected or drained as required.
Sizes of 1.5 inch and above are threaded with a half inch BSP for the connection of standard nuts/hose fittings is provided with a solid end cap seal are fully demountable for cleaning and parts replacement.
Optional end caps are available with fixed nipples/nozzles for hose connection or free nipples which can rotate when heavier hoses are used. |
|
Plug-in Profile TPE, Slot 8-10
Description To secure panels in the slot and fill the slot
Material TPE
Color Black (other colors on request)
Pack Quantity 100 meter (coil) |
|
3-way Connection Angles
- 3-way Connection Angle 30, Die-cast Zinc, for Profile 30
- Cover Cap for 3-way Connection Angle 30, Nylon, Profile 30, Angular
- Cover Cap for 3-way Connection Angle 30, Nylon, Profile 30, Round
- 3-way Connection Angle 38/ 1,5", Die-cast Zinc, for Profile 1,5 Inch
- Cover Cap for 3-way Connection Angle 38/ 1,5", Nylon, Profile 1,5 Inch, Round
- Cover Cap for 3-way Connection Angle 38/ 1,5", Nylon, Profile 1,5 Inch, 45°
- 3-way Connection Angle 40, Die-cast Zinc, Profile 40
- Cover Cap for 3-way Connection Angle 40 , Nylon, Profile 40, Angular
- Cover Cap for 3-way Connection Angle 40 , Nylon, Profile 40, Round
- Cover Cap for 3-way Connection Angle 40 , Nylon, Profile 40, 45° |
|
| ... products without technical information |
| |
A practical range of PLUG CASES for many applications:
- country specific
- conforming to standard
- flame-resistant
- robust and impact-resistant
Simply an extremely functional solution for your electronics.
Live parts and socket versions in flame-resistant material PC/ABS (UL 94 V-0).
|
|
Absopulse Electronics offers a line of plug-in (Eurocard) DC/DC converters designed for railway and other harsh-environments. These units utilize field-proven topology to deliver any DC output up to 130Vdc. They can typically be operated from supply voltages of 24Vdc ((14.4–37V), 36Vdc (22–55V), 48Vdc (28V-74V), 72Vdc (42V-110V), 96Vdc or 110Vdc (57V-168V). Other inputs are available on request.
Absopulse’s line of plug-in (Eurocard) railway converters are designed to meet the requirements of EN 50155 for electronic equipment used on railway rolling stock. They also meet EN 55022 Class B EMI and EN 50121-3-2 (EMI and EMC). The plug-in (Eurocard) series is rated for operation over a -25 to +70oC temperature range without derating, with natural convection cooling. Features typically include full electronic protection on the input and output, optocoupler, optional alarm output and optional control input. An optional built-in redundancy diode to allow for parallel connection to achieve higher output power or N+1 redundancy is available on most designs.
These compact plug-in modules are typically used in 19” rack-mount applications. They are heavily ruggedized and conformal coated and designed to meet IEC 61373 Categories 1 A & B shock and vibration standards.
Absopulse Electronics provides an extensive range of power supplies for operation in railway, industrial and other extreme environments in encapsulated or vented, chassis mount packages. If our standard designs do not meet your requirements, our engineering team will provide a cost-effective solution to meet your exact specifications. |
|
| The induction sealing technology is a sector in full expansion where ME.RO has emerged as a leading company. In a growing market where the producers are concerned to protect their products from illicit opening guaranteeing the consumer of the product integrity, we have succeeded in giving a practical and efficient answer to their requirements, to all sectors in the industry of packaging: food, beverage, pharmaceutical, chemical, cosmetic, agrochemical and petrol. |
|
The CS Plus350SS is our most advanced patented self-cooled cap sealer. Designed for high volumes, the CS Plus350SS can handle line speeds up to 350 feet per minute. It's completely water-free and fan-free, offering the ultimate in reliability and performance.
Whatever your conveyor speed, the CS Plus integrates easily into your line. It is shipped ready to roll up to your conveyor and begin sealing caps from 5mm to 120mm. The easy-to-use controls permit a variety of settings including an "Energy Saver Mode."
FEATURES:
- Advanced, self-contained, convection cooled system: operates in high ambient temperature and humidity conditions U.S. Patent. No. 6,713,735 granted March 30, 2004
- Smooth, precise adjustment of sealing head height
- Solid state design with high-efficiency sealing heads
- System integrity monitoring: for power, current, frequency, phase, temperature and communication
- Stainless steel, NEMA 4-approved enclosure and modular components
- Two year warranty: longest in industry
- Remote capability: allows a second control panel to be located away from the sealing head
- Optional motion sensing package: to monitor line speed, stalls, alignment and tolerance setting
- Easy-to-operate, legible microprocessor controls: allow user-defined parameters such as Percent Power and Energy Save
BENEFITS:
- Water-free: requires no water system or plumbing
- Fan-free sealing head: eliminates filter changes and downtime
- No moving parts: eliminates maintenance and cleaning
- Quicker setup with no assembly: just uncrate and roll it up to your line |
|
| ... products without technical information |
| |
Venture into unknown work hazards! Stepping onto a greasy, slippery, wet floor can be treacherous, so we engineered our Steel Toe shoes for traction and safety. These durable boots and shoes are built to protect you and your feet
- Resistant against Oil, Chemical and Animal Fats
- Energy Absorbant Outsole
- Anti-Fatigue
- Non Marking Outsole
- Superior Comfort
- Impact Resistant Cushioned Insole
- Shock-Absorbent Outsole
- Advanced Traction Control
- Leather & Ballistic Knit Uppers
- Metallic Eyelets
- Antistatic
|
|
Upper : high
Colours : Black
Size : 5 - 13
Size (EU) : 38 - 48
Size (cm) : 24.5 - 31
Type of sole : OUTDOOR Parabolic
Assembly : injection
Standard : EN-345-1
Protection : S3, Cl |
|
ABSOLUTE SAFETY SHOE
EN 345 - S3
BESTBOY
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 36-47
Category S3
Lining Cambrella
Insole Premoulded
|
|
| ... products without technical information |
| |
| We are pleased to inform you that TAMPOPRINT AG has extended its delivery programme by the successful further developments of the well proven 2-lane tampon printing machine types „Rotoprint“ and „Continua“. The extension of the „Rotoprint“ to 3 lanes allows an output of 150.-180.000 closures / h, printed with 1 to 3 colours and with a max. parts diameter of 26-32 mm. Closures with a diameter of 38-50 mm can be decorated with an output of up to 120.000 parts / h with 1 to 3 colours. The combination of the electro-mechanical drive by means of a toothed wheel and the use of only one printing cylinder (manufactured for a precise fitting on a rotary gravure laser) per ink unit lead to a perfect accuracy with an accordingly high machine efficiency. The advantage is first of all that only one cliché cylinder 100x150 mm per printing unit is needed and therefore the set-up costs remain low. Compared with the “Rotoprint”, on the 3-lane “Continua” it is possible to achieve a quality print with an output of more than 180.000 closures / h, using up to 5 colours. Both machine types have as a standard feature a new gas pretreatment which is automatically controlled depending on the printing speed and thereby achieve an optimum ink adhesion. After the cold air intermediate drying for both lines also the end drying can take place by means of gas. Optionally it is possible to integrate camera systems for the print image control. The components are fitted to our printing lines with a new sorting elevator that is gentle to the parts and colour-independent. The feeding of the closures takes place via gravitation, without mechanical damage and without air consumption. |
|
Automatic Cap Printing Machines with intelligent controls
Superb photo quality, full colour printing, resolution 200 Lpi with solvent or UV ink + UV varnish protection
Integrated pre-treatment and drying
Print parameters for different images are stored in memory
Very high scratch resistance
The output is 65.000 to 70.000 caps per hour (Ø 28 mm - full colour); with other machinetype capacities up to 200.000 caps per hour
|
|
| ... products without technical information |
| |
|
