|
|
| ... products without technical information |
| |
|
ZincTape comprises a layer of 99,99% pure zinc 80 microns thick with 25 microns of adhesive protected by a removable siliconised paper. It is available in rolls or in shapes based on the customer's needs. A feature of the new laminated zinc tape is its electrically conductive adhesive:this is achieved by incorporating a percentage of powdered zinc into the adhesive during manufacture. Since it's very easy to apply ZincTape, our product can be used in different fields, such as automotive and railway sectors, refineries, pipelines, tanks, poles and stakes and others.
|
|
reel of indication, stopping of zones, to delimit zones
access, zones at the risks etc
with 16m of ribbon of red and white indication width 50mm
with recall by spring and detent pawl
|
|
|
Safety valve test benches for testing safety and shutoff valves from ½”up to 24”. The units are equipped with an automatic hydraulic clamping device. All hydraulic tests and high pressure gas tests are possible. The benche can be equipped with all kind of options such as a digital bubble test, computer storage and printouts.
|
|
|
Fully automated system for applying protective tape to semi-finished lenses. Job trays are automatically conveyed via conveyor belt.
|
|
Safety quarter turn
Tamper-and vibration-proof. With the double
bit version the key is captive in the open
position. (Hole for double bit to DIN 43668.)
The whole range is IP 65, only available with
pre-assembled cam.
|
|
Double E Safety Chucks hold shafts safely in place for winding. Some of the safety chuck benefits include:
Jaw design compensates for shaft deflection; safety chuck does not bind.
Sliding action sharply reduces possibility of finger jamming.
Patented push button ensures roll security and operator safety.
Patented circular engagement allows high torque while reducing noise and vibration.
Removable jaws extend chuck life; easy and inexpensive to replace.
Easy cross-reference for replacing existing safety chucks.
|
|
BRUGG-STAMANT®
Guaranteed environmental safety
BRUGG STAMANT Safety Pipe ® is a dual pipe system prefabricated in construction units; it is especially suitable as a pipe to transport combustible or non-combustible media and gases that endanger water.
Optical and acoustic alarms are triggered in case of a leak if the pipe is used in conjunction with a leakage indicator.
Conditions and requirements
Conventional engineering of dual-wall pipe systems to transport hazardous substances must meet the highest requirements in terms of expert design and optimal technology - especially when larger dimensions are involved. As you would expect, we guarantee compliance with all conditions for fire and explosion prevention and water protection.
|
|
Max primary pressure: 18 bar
Temperature: 1/4" - 1/2" -20 - 80° C
3/4" - 2" -20 - 120° C
Material: Housing: Aluminium
Other parts: Nitrile rubber, plastic, steinless steal
The HoseGuard® is a simple, but efficient protection of a broken compressed-air hose. The air supply is shut off immediately by the HoseGuard®, should the volume of air exceed a set value. This "value" is preset by the manufacturer and is of course, set in a way that allows normal air consumption. when using air tools. The HoseGuard® is made so that it ensures a constant bleeding through a tiny nozzle, making the HoseGuard® return to zero position, once the broken hose has been repaired. The HoseGuard® remains closed until the quick-connection for the main pip has been disconnected.
|
|
INTRA transfers inductive signals from one or multiple Bircher SafeTecâ sensing edges to an electronic unit for evaluation. The redundant evaluation meets the requirements of the German standard ZH1/494 for doors and gates.
The main advantage of INTRA is the capability to monitor sensing edges without mechanical or direct electrical connections between the stationary and moving part of a sliding gate. Compared to conventional sensing edge signal transmission via trailing cable, the INTRA system is virtually maintenance free.
|
|
The special antimicrobial material EBP.SAN is made out of, stops any deposit of bacteria, mildew and fungi, offering a sanitized effect on the surface.
Tests carried out on material samples confirmed the stability of the antimicrobial action after several cleaning cycles at high temperatures with soap and solvents.
The great resistance to high temperatures of the antimicrobial additive allows this handle to reach sterilisation temperatures (130°C).
|
|
4 rolls special machine for guard-rails (2 or 3 waves) suitable for bending either leg-in or leg-out.
|
|
Double Diaphragm Vacuum Pumps and Compressors for greatly increased safety
The double diaphragm pumps: especially suitable where safety and gas tightness are essential, e.g., with toxic, radioactive or particularly expensive gases.
|
|
ProCam
Fast and easy crash vehicle measurement
* Mobile optical probe replaces conventional CMM or articulated arm
* For pre- and post-crash measurement, analysis and documentation
* Free movement around the vehicle without any additional alignment
* Easy measurement of hidden points
|
|
The roller shutters, venetian blinds or awnings can be easily automated with sensors:
They register the actual weather conditions, of sunlight and wind velocity, and then activate the drive accordingly.
This enables you to protect yourself from damp and frost, avoid damage from storm gusts and offers patios,
conservatory or homes the ideal sun protection. A very simple installation is guaranteed with the wireless sensors.
|
|
Test Accessories for
- Electrician
- Laboratory and Education
- Test and Measurement Equipment
- Electronics
The complete product range for measuring, testing, connecting and experimenting
Our Safety Test Accessories are touch-protected according to IEC / EN 61010-031:2002
|
|
Winters Instruments' Safety Case Gauge is designed to be used where safety is a major concern. With a solid front and blowout back, this gauge features a 0.5% ANSI/ASME Grade 1A accuracy, full rotary movement and a micrometer pointer for easy calibration. The 4.5" dial makes the gauge easy to read even from a distance (4" and 6" dials, 1% accuracy available).
This all stainless steel Safety Case Gauge is ideal for use in process, petrochemical and oil & gas industries, where operator safety is of paramount concern. In the rare chance of a catastrophic failure, a solid stainless steel wall separates the bourdon tube from the front of the gauge, forcing any pressure safely out of the back of the case. Operator safety is further enhanced by the standard safety glass lens.
|
|
|
Protect your machines against damage, loss of production and downtimes. With EAS-clutches your machine is completely safe. We offer the best and most attractive mechanical package. Indicate your drive requirements and we will ensure the security of your machines.
|
|
... see all the products in the category
Clutches
|
| ... products without technical information |
| |
|
