|
|
Type: Linear
AC Voltage: 230V~240V
Output Current: 160mA
Output Voltage: 4.2V
Charging Indication: LED Lights
|
|
Features:
- Patents
- Standard/ Din Rail Mount (Option)
- Output Modify Range:3V~200VDC
- Automatic output protection,
- No replacement fuse
- Compact-Economical
- Water & Dust Proof
- 2 years Warranty
- Reverse Polarity Protection
- Charger type exposition download
- RoHS Report
- ISO 9001:2000 TUV Certification
- Part Number Rule
- Split rail, Series, and Parallel, Redundant use, and Remote sensor connection circuit
|
|
Product Description
Type: LI-POL
Voltage: 3.7V
Capacity: 2500mAh (Min.）
2650mAh (Typical）
|
|
Product Description
Type: LI-POL
Voltage: 3.7V
Capacity: 1300mAh (Min.）
1350mAh (Typical）
Cell: JA-753450 X 1
|
|
Product Description
Type: NI-CD
Voltage: 4.8V
Capacity: 700mAh
|
|
Product Description
Type: NI-MH
Voltage: 8.4V
Capacity: 1100mAh
|
|
Product Description
Type: NI-CD
Voltage: 14.4V
Capacity: 600mAh
|
|
Product Description
Type: NI-MH
Voltage: 14.4V
Capacity: 3000mAh
|
|
Product Description
Type: Nickel Metal Hydride Battery Pack
Voltage: 3.6V
Capacity: 1000mAh
With PTC to protect current
|
|
Product Description
Type: LI-ION
Voltage: 3.7V
Capacity: 3200mAh
|
|
Product Description
Type: LI-ION
Voltage: 3.7V
Capacity: 650mAh
|
|
| ... products without technical information |
| |
... see all the products in the category
Batteries
|
Features
With simpIe structure,easy dismount,adjustabIe foot height,vibration-proof device,Iow noises,high efficiency,Iong-term normal operation,easy maintenance,gentle and tender treatment, of materiaIs this sanitary centrifugaI pump series is your ideaI choice.It complies with food sanitary standard and guarantees original taste of your products.
Application
Mainly used in industries such as pharmacy,aIcohol,foodstuff chemicaI and beverage to deliver Iiquid in smaII flow with high pressure and high pressure filtering.
|
|
Magnetically coupled centrifugal pumps of building group 2 are non-self-priming centrifugal pumps with volute casing. They operate in horizontal position and are built in monobloc design. A magnetic coupling connects the pump to the electromotor and transmits the power of the motor to the impeller.
Housing, impeller, impeller magnet coating and rear casing can be made of either glass-fibre reinforced PP plastic or PVDF. Sleeve bearings, starting ring and centering shaft are made of 99.7% pure oxide ceramic. O-ring sealing of the housing is made of FPM or EPDM or FEP (optionally available).
- For aggressive and neutral liquids
- For short-term and continuous operation
- With non-ventilated motor so that it is insensitive to vapour.
|
|
Magnetically coupled centrifugal pumps of building group 1 are non-self-priming centrifugal pumps with volute casing. They operate in horizontal position and are built in monobloc design. A magnetic coupling connects the pump to the electromotor and transmits the power of the motor to the impeller.
Constructional design
Housing, impeller, impeller magnet coating and rear casing are made of either glass-fibre reinforced PP plastic or PVDF or stainless steel. Sleeve bearings, starting ring and centering shaft are made of 99.7% pure oxide ceramic. O-ring sealing of the housing is made of FPM or EPDM or FEP (optionally available).
- For aggressive and neutral liquids
- For short-term and continuous operation
|
|
Magnetically coupled centrifugal pumps of building group 4.5 are non-self-priming centrifugal pumps with volute casing. They operate in horizontal position and are built in monobloc design. A magnetic coupling connects the pump to the electromotor and transmits the power of the motor to the impeller.
Housing, impeller, impeller magnet coating and rear casing can be made of either glass-fibre reinforced PP plastic or PVDF. Sleeve bearings, starting rings and centering shaft are made of 99.7% pure oxide ceramic. The impeller starting ring is made of PTFE graphite. O-ring sealing of the housing is made of FPM or EPDM or FEP (optionally available).
- For aggressive and neutral liquids
- For short-term and continuous operation
|
|
|
|
|
|
The centrifugal immersion pumps of building group 4 are used for wet-pit operation in containers, pits and tanks. Centrifugal immersion pumps for dry-well installation, i.e. to be installed and operated outside the container, are also available.
All components of pumps in plastic design that are in contact with the fluid are made of PP or PVDF. The pump shaft consists of a motor shaft made of stainless steel and a shaft-protecting tube of either PP or PVDF. Built-in elastomers are made of FPM (or also EPDM without surcharge). Centrifugal immersion pumps are equipped with overhang shafts so that there is no need to provide for shaft bearings in components that are in contact with the fluid. Thus, the pumps are safe to run dry and do not require regular service and maintenance.
There is no need of a mechanical sealing of the shaft. Only a so-called gas seal is installed beneath the motor to prevent aggressive vapours from penetrating the motor chamber. But this seal is never in contact with the fluid delivered.
- For aggressive and neutral liquids
- For short-term and continuous operation
|
|
Vertical centrifugal immersion pumps
Seal lots and safe to run dry Solid plastic vertical centrifugal immersion pumps are used predominantly space-saving by direct installation into industrial environments. For strongly crystallizing media, centrifugal immersion Pumps are supplied with a special seal to avoid the penetration of steam and the connected crystallization. Standard depths of immersion are ranging from 200 mm up to 500 mm. Depths of immersion up to 1000 mm are possible by the means of an intermediate bearing
Fluids delivered:
- Acids, bases and mixtures
- Solvents
- Alkaline degreasing baths
- Electroplating baths
- Foto chemicals
- Radioactive, aseptic and precious liquids
- Food stuffs
- Other low-viscosity fluids
Fields of application:
- Electroplating
- Etching and cleaning plants
- Refrigerating machines
- Solar systems
- Sewage and water treatment
- Foto industry
- Textile and food industries, etc.
|
|
IH Type chemical and industry pump is mono-grade mono-absorb cantilever type centrifugal pump, which is a kind of renew energy-saving product that replaced F type cauterization –resistant pump, it is suit to chemical and industry, petroleum, foodstuff, pharmacy and synthetic fiber and etc department where transport the cauterization –resistant type medium or physical、chemical similar to water medium. This pump material is stainless steel.
high efficiency and save energy
- widely applicable
- install easy
- low noise
- structure reasonably
- international standard
- convenient maintenance
- working temperature 80℃
|
|
Gorman-Rupp 60 Series pumps are standard centrifugal, high pressure, high volume pumps with exceptional efficiencies (up to 85%). Discharge on many models can be placed in any position by turning the pump casing.
Specifications
Size: 3" (75 mm), 4" (100 mm), 5" (125 mm), 6" (150 mm), 8" (200 mm), 10" (250 mm), 12" (300 mm)
Max Capacity: 6,800 GPM (429 lps)
Max Head: 500' (152 m)
Max Solids: 3" (76 mm)
Max Temperature: 160 F (71 C)
Materials of Construction: Cast Iron, Cast Steel, Ductile Iron
|
|
The Gorman-Rupp line of engine driven high pressure fire pumps delivers up to 156 PSI and 250 GPM. They are equipped with an exhaust primer. All units have a built-in check valve and include a discharge pressure gauge, brass hose adapters - NPT to National Standard Fire Hose Threads, and a suction strainer.
Specifications
Size: 1-1/2" (37.5 mm), 2-1/2" (62.5 mm)
Max Capacity: 260 GPM (16 lps)
Max Head: 360' (110 m)
Max Solids: 0.3125" (8 mm)
Materials of Construction: Aluminum
Horsepower: 13 HP to 23 HP
|
|
ALW horizontal type centrifugal clear water pump is used to transport clear water and other liquid has chemical and physical property similar with the clear water. It is applicable to water supply and drainage for industry and city pressure increasing water supply for high building ,garden irrigation, pressure increasing for fire fighting, long distance transportation, heating and cooling circulation, cold and warm water circulation pressure increasing and matching equipment, the using temperature is T ≤ 80 ℃.
- Stable function
- watertight
- low noise
- Low rate of failure
- convenient repair
- small occupying of the land
|
|
CQ TYPE magnetic force driving pump (called magnetic pump), is the new product, which use the permanent magnet join-axis working principle for centrifugal pump, and has advantage of reasonable structure, advanced workmanship, full sealed, non-leakage and cauterization-proof, its performance can be match to the same product of foreign countries.
- reasonable structure
- advanced workmanship
- full sealed, non-leakage
- strong corrosion-resistance
- compact conformation、good- looking appearance
- small in size 、low noise
- uniformity of operation
- convenient maintenance
|
|
|
Whether bypassing a pump station during repair, keeping critical services operational at a plant, or helping a construction crew finish on time, Gorman-Rupp's Super T Series® portable engine-driven pumps keep the liquid flowing. Gorman-Rupp's Super T Series self-priming centrifugal pumps are designed to reprime automatically in a completely open system - without a need for suction or discharge check valves (an optional discharge check and air release valve is only required when pumping against a pressurized system). Additionally, there is no need for add-on vacuum pumps or compressors, which add to owner maintenance and increase the potential for costly repairs.
|
|
Today’s pumping applications demand better and more efficient self-priming, solids-handling pumps. At Gorman-Rupp, providing greater performance and reducing installation and maintenance costs have always been our ultimate goals. This makes the Ultra V one of the best values introduced to the pump industry in decades.
This next generation of solids-handling, self-priming centrifugal pumps offers substantially higher pressures, flows, efficiencies and time-saving maintenance features, all in one package.
Ultra V Series pumps achieve up to 60% increased pressure and 40% increased flow over traditional self-priming trash pumps of the same size, while substantially increasing overall pumping efficiency.
|
|
ALG series single stage single suction pipeline centrifugal pump are designed by scientific and technical personnel of our company and domestic water pump experts, which select the domestic excellent hydraulic model, adopt the performance parameter of the centrifugal pump of Model IS. Besides, according to different using temperature and medium, we develop pumps applicable for hot water, high temperature the corrosive environment, oil transporting on the basis of Model ALG
- Suitable for industry and city's giving and draining off water
- It is convenient to form a complete set with other apparatus
- High efficiency, low noise
- There are cold water types, hot water type, high temperature type, chemical industry type, oil type
- Performance is reliable
- International standard
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
