|
|
CRES stands for Corrosion Resistant Engineered Solutions... a new look at corrosion resistant power transmission components.CRES Mounted Ball Bearing products start with the latest in corrosion resistance technology coupled with advanced industry minded features driven by industry-focused leaders. Finally, our engineers designed CRES around the notion that a "family" of corrosion resistant products spanning the spectrum of performance and value will provide customers flexibility and latitude to specify the correct solution when and where they see fit... without jeopardizing product performance or operating profit.
|
|
Linear guidance systems with linear recirculating ball bearing units comprise ball bearing units, carriages and guideways. They allow large support distances, have adjustable clearance and are to standard accuracy class G3.
The full complement bearing units run on one or both sides of the guideways and, despite their small dimensions, have high load carrying capacity. If the bearing units are screw mounted in carriages, together with the guideways they form four-row linear recirculating ball bearing and guideway assemblies. The ball bearing units are sealed on all sides by the wipers on the end faces and on the sealing strips which form a gap seal in conjunction with the guideway. Linear recirculating ball bearing units can be relubricated.
|
|
Linear bearings offer an easy and economic solution for unlimited linear motions.
Three different types are available:
• Linear bearings with closed design for applications with short strokes and loads from different directions
• Linear bearings with slot and clearance adjustment
• Linear bearings with open design for applications with high and one-sided loads
Whole linear bearing units, partly with several linear bearings one behind the other and with different designs complete our product range.
There are linear bearings made of plastic with load bearing plates of hardened steel or linear bearings with steel body, in standard material or corrosion resistant, with or without sealing, in sizes 2 – 150 mm.
We certainly find the right linear bearing for your application.
Advantages of our linear bearings:
• Easy replacement
• Economy installing
• Self-adjusting for bended shafts
• Smooth running
• High speed applications with high acceleration
|
|
| ... products without technical information |
| |
| High radial loads (over 8000 lbs depending on load carrying options) and moment load capacity with consistent tracking. Heavy duty recirculating bearing system in gothic arch rail guides for wear resistance with repeated accuracy. Strokes in any incremental length up to 292 inches depending on model selected. Travel speeds to 155 in/sec. |
|
| High load (over 2000 lbs) and moment load capacity (over 1600 in-lb) with consistent tracking. Features a heavy duty recirculating bearing system in gothic arch rail guides for wear resistance with repeated accuracy. Strokes are available in any incremental length up to 10 feet depending on body size and screw/nut choice. |
|
Our manufacture of linear modules motorisables is of the type:
- TLM-G: Linear modules on ball guide with drive belt,
- TLM-V: Linear modules on guidance with billesavec drive by ball screw.
On request, following plane and schedule of conditions we carry out all types of specific systems (linear modules X/Y, special carriages GD.) |
|
rod end housing:
forged steel, tempered, case hardened, bearing race, ground and lapped, rolled thread, surface galvanized
inner ring:
ball bearing steel, hardened, superfine ground
lubrication:
Polyrex EP2 or soap complex
temperature range
-20 °C to +120 °C
lubrication nipple:
DIN 3405 D1/A (sizes 1/4 to 3/8)
DIN 71412 H1 (sizes 1/2 to 1/1)
bearing clearance:
15 - 40 µm radial
tolerances:
view |
|
Track rollers are self-retaining, single or double row units with particularly thick-walled outer rings. These bearings can support axial forces in both directions as well as high radial forces. The bearing outer rings have a crowned or cylindrical outside surface. Designs with a crowned outside surface are used where there is misalignment in relation to the raceway and edge stresses must be avoided. The track rollers are available with an inner ring, with a stud and with a plastic tyre on the outer ring.
|
|
Material:
-Rod End Housing: Forged steel, tempered, case hardened bearing race, ground and lapped, rolled thread, surface galvanized
-Inner ring: Ball bearing steel, hardened, superfine ground
-Lubrication: Calcium-complex-soap-grease |
|
| ... products without technical information |
| |
TSR and TSR+C Ring / Triple Swivel Ring
Triple articulation allows it to line up perfectly with the sling
Allows the hook to move parallel to the supporting face of the ring being drawn at 90°
Two ways of tightening: either by open-ended spanner, or by Allen key
From M8 to M56 as standard; for loads from 0.3 t to 22 t
From UNC 3/8" to UNC 2" as standard; for loads from 1,200 lbs to 50,000 lbs
Other variants of fitting bolts on request
|
|
The lifting ring for turning operations
The heavy duty lifting rings >WBG-VWBG< have a ball-bearing swivel and are suitable for turning and tilting of loads.
Simple assembly, only one tapped hole is required. Available with different thread lengths.
|
|
The lifting ring for turning operations
The heavy duty lifting rings >WBG-VWBG< have a ball-bearing swivel and are suitable for turning and tilting of loads.
Simple assembly, only one tapped hole is required. Available with different thread lengths.
|
|
Linear guidance systems with linear recirculating ball bearing units comprise ball bearing units, carriages and guideways. They allow large support distances, have adjustable clearance and are to standard accuracy class G3.
The full complement bearing units run on one or both sides of the guideways and, despite their small dimensions, have high load carrying capacity. If the bearing units are screw mounted in carriages, together with the guideways they form four-row linear recirculating ball bearing and guideway assemblies. The ball bearing units are sealed on all sides by the wipers on the end faces and on the sealing strips which form a gap seal in conjunction with the guideway. Linear recirculating ball bearing units can be relubricated.
|
|
BALL BREARINGS LINEAR RAILS are made of RUNNER that moves in a fixed RAIL.
Designed for load capacity from some kg to 600 kg PER RUNNER, the common length of the rail is 3 meters. It can be 5 meters for some references. Should some applications need very great lengths, the rails can be prepared for an end to end mounting.
Linear rails is the optimum solution for protective or access DOORS applications (machine tools, vehicles, trains or subways) . |
|
Traditional angular contact ball bearing measuring devices still use manual or semi-manual machines: a low degree of precision is obtained and the process time is long. The Bussi contact angle measuring machine is extremely precise, reliable, fully automatic and fast. It combines electronics with top-level engineering and pneumatics. It features:
Data setting: a computer stores the bearing data it is necessary to measure and is input just once. Every time there is a type changeover, only the bearing code needs to be recalled, thereby avoiding error and time wasting. Storage capacity: 500 types of bearing.
Automatic measurement: it makes two checks simultaneously, the contact angle measure and that all the balls are present. Field of measurement: 0° to 89.9°
Precision and repeatability: precise to ± 0.2 ° with high measurement repeatability. This performance can depend on the level of precision achieved when the bearing is constructed.
Measurement speed: the process is extremely quick, between 14 and 17 sec, with a capacity of up to 257 pieces/hr. Maximum type changeover: < 4 min
Optional automation for lines
|
|
| Stroke is contained within the cylinder itself for space saving advantage. Allows force to be applied in both directions. Load capacities up to 8032 lbs. Handles high, off-center loads with consistently smooth operation. Recirculating ball-bearing system for wear resistance and repeated accuracy. Low breakaway. High bending moment capacity. Cost-effective alternate to auxiliary rail systems. |
|
Seal Puller SP 50
Novel tool for the dismounting of oil seals and sealings of all sizes.
Slide hammer with 2 extensions
50 one-way screws |
|
|
|
