|
|
Ball bushing
Slide unit and shaft supporter
A variety of model and size
World wide slaes network
High quality, reasonable price and short delivery time
Strict control quality
High rigidity, High precision retainer, compatibility
|
|
|
|
|
|
Universally self-aligning these bearings offer a dual track design and load capacities up to 7,760 lbf (30,000N).
* Dual Track Design and load capacities up to 7,760 lbf (30,000N): up to six times the load capacity or 216 times the travel life of conventional linear bearings. That’s twice the load capacity or eight times the travel life of industry standard Thomson Super Ball Bushing bearings.
* A precision super furnished, dual track bearing plate for optimum system smoothness and performance.
* A universal self-alignment feature which compensates for misalignment of housing bores and 60 Case LinearRace shaft deflection, optimizes load distribution between ball tracks, and assures uniform ball loading over the entire length of the bearing plate, minimizing installation time and cost while bearing performance and life is maximized.
* A technologically advanced design that allows the bearing to maintain its diametrical fit-up when installed in housing that is slightly out-of-round.
* Longer travel life and minimal machine downtime when replacing conventional linear bearings or the industry standard Super Ball Bushing bearing.
|
|
Linear guidance systems with linear recirculating ball bearing units comprise ball bearing units, carriages and guideways. They allow large support distances, have adjustable clearance and are to standard accuracy class G3.
The full complement bearing units run on one or both sides of the guideways and, despite their small dimensions, have high load carrying capacity. If the bearing units are screw mounted in carriages, together with the guideways they form four-row linear recirculating ball bearing and guideway assemblies. The ball bearing units are sealed on all sides by the wipers on the end faces and on the sealing strips which form a gap seal in conjunction with the guideway. Linear recirculating ball bearing units can be relubricated.
|
|
Linear bearings offer an easy and economic solution for unlimited linear motions.
Three different types are available:
• Linear bearings with closed design for applications with short strokes and loads from different directions
• Linear bearings with slot and clearance adjustment
• Linear bearings with open design for applications with high and one-sided loads
Whole linear bearing units, partly with several linear bearings one behind the other and with different designs complete our product range.
There are linear bearings made of plastic with load bearing plates of hardened steel or linear bearings with steel body, in standard material or corrosion resistant, with or without sealing, in sizes 2 – 150 mm.
We certainly find the right linear bearing for your application.
Advantages of our linear bearings:
• Easy replacement
• Economy installing
• Self-adjusting for bended shafts
• Smooth running
• High speed applications with high acceleration
|
|
Track rollers for Vee bars/Plain rollers - type FR/LR
The backlash setting and the pre-tensioning of the rollers takes place via the eccentric hub of the rollers of the series FR.., FR..R or LR.., LR..R.
The FR..Z and LR..Z series are the concentric models. In the eccentric rollers, the inner bolts are provided with two holes. These allow for the adjustment of the backlash. If a roller is located in its zero position, the teeth backlash will be the standard value of 0.05 mm flank clearance.
The service life of the system will be reduced by excessive tensioning. With too little tension the rollers will not run, or will wear due to the poor meshing.
|
|
| ... products without technical information |
| |
KettenWulf develops and produces special conveyor and transport chains in all designs and dimensions. Moreover, we manufacture standardised chains to DIN and ISO norms. Our standard delivery programme includes:
» Bushed conveyor chains according to DIN 8165
» Bushed conveyor chains according to DIN 8167
» Conveyor chains with hollow pins according to the former DIN 8165
» Conveyor chains with hollow pins according to DIN 8168
» Deep links chains according to DIN 8165
» Deep links chains according to DIN 8167
» Trough conveyor chains according DIN 8165
» Trough conveyor chains according DIN 8167
» Galle chains according to DIN 8150
» Draw bench chains according to DIN 8156
» Draw bench chains according to DIN 8157
» Pinions
» Hinged gear racks
» River gate chains
» Block link chains
|
|
Conveyor chains
Chains, attachments, wheels, sprockets and platewheels complying with ISO standards
Chains, attachments, wheels, sprockets and platewheels complying with BS standards
Chains with solid bearing pins and attachments from the French series
Examples of special chains:
Adapted conveyor roller chains
Leaf balance chains
Galle chains - Draw bench series
Lifting chains for barrage and dam gates
Chains for abattoirs
Agricultural chains
Chains for the automobile industry
Biplanar chains for overhead conveyors
Chains for the wood industry
Chains for the cement industry
Chains for distilleries
Escalator chains
Chains for water treatment and filtration
Chains for bottle washing application
Chains for paper mills
Chains for the steel industry
Sugar refinery chains (cane or beet)
Chains for public works
...
|
|
| ... products without technical information |
| |
... see all the products in the category
Pulleys
|
|
|
|
|
New Bihler bushing machine RM 40B
Highest productivity, precision and process security in bush manufacturing
Perfectly designed for the manufacture of cylindrical, straight bushes and flanged bushes, the RM 40B can produce these types of bushes without problems from 6 to 18 mm inner diameter and up to a maximum of 40 mm in long (max. strip dimensions 1.5 mm x 40 mm). The machine speed is infinitely adjustable and varies subject to the type of bush. If the speed, for flanged bushes (collared bushes), is at 250 1/min, it climbs to 400 1/min for cylindrical, straight bushes.
Bihler offers the RM 40B as cost-effective complete package. Consisting of compact basic machine, standard accessories (mechanical gripper feed, strip straightener, 70 kN 12 mm stroke two-point eccentric press, two 30 kN normal slide units with 25 mm stroke, 30 kN central mandrel with 50 mm stroke, 60 kN transverse press with 35 mm stroke, rotary table drive, user and personnel protection), tool components (basich tooling, two sets of tool fixtures) and the new user-friendly Bihler VariControl VC1-E the customer obtains added-value which pays off immediately.
Besides its high degree of productivity and process security the Bihler bushing machine stands out for shortest tool changeover times (less than 10 min.). This is possible due to its simple rapid-change tooling system to be handled via switch and the second set of tool fixtures that can be pre-equipped for another bush type. The tool components’ top degree of standardization ensures that they can be used all around the world and, by the efficient work of operators, considerably adds to increase machine runtimes.
|
|
Linear guidance systems with linear recirculating ball bearing units comprise ball bearing units, carriages and guideways. They allow large support distances, have adjustable clearance and are to standard accuracy class G3.
The full complement bearing units run on one or both sides of the guideways and, despite their small dimensions, have high load carrying capacity. If the bearing units are screw mounted in carriages, together with the guideways they form four-row linear recirculating ball bearing and guideway assemblies. The ball bearing units are sealed on all sides by the wipers on the end faces and on the sealing strips which form a gap seal in conjunction with the guideway. Linear recirculating ball bearing units can be relubricated.
|
|
|
|
|
|
Linear roller bearings are suitable in conjunction with guideways for locating/locating or locating/non-locating bearing arrangements and form a bearing arrangement system for linear motion with unlimited stroke length. In closed arrangements, they can support loads from all directions and moments about all axes. Their load carrying capacity is extremely high and the space required is very small. The guidance systems can be preloaded by adjusting gibs and have extremely high rigidity when preloaded.
Since the guidance elements have a versatile range of possible arrangements, linear recirculating roller guidance systems are suitable for numerous applications in general machine building, especially for linear guidance systems in machine tools where high guidance and positioning accuracies are required over long traverse distances.
The range is supplemented by adjusting gibs for precise setting of the preload, setting devices for measuring the deformation of the adjacent construction where preload forces must be supported and adapters for easy mounting of the linear roller bearings in a 45° arrangement.
|
|
mk linear motion
mk linear motion stands for customised glides, track rollers and recirculating ball bearings which set themselves apart through precise running and high reliability during use.
You can choose between profile tracks, linear tracks and linear modules for handling applications with high repeatability and accuracy - carriages, pneumatics or motors on request.
Recirculating ball bearings:
- Can be loaded in all directions
- High loading capacity
- Compact construction
- One track for different carriage types
- Medium to high acceleration and speed
- High precision on appropriate connection surfaces
|
|
(A Bearings) Original precision anti-friction linear bearing all steel construction with load capacities up to 5,000 lbf and high operating temperature capabilities.
A coefficient of friction as low as .001. When replacing high friction plain bearings, Precision Steel Ball Bushing bearings dramatically improve machine productivity and efficiency.
All-steel construction, for maximum system rigidity.
Two accuracy classes allowing for immediate improvements in system positioning and repeatability.
Availability in fourteen bore sizes and nine configurations.
The RoundRail Advantage which minimizes installation time and cost.
Steady state travel speeds up to 10 ft/s and accelerations to 450 ft/s2 without the use of derating factors.
An operating temperature up to 600 degrees F.
Availability in a self-aligning pillow block housing for ease of installation and use.
Worldwide availability from over 1800 authorized distributors.
|
|
BALL BREARINGS LINEAR RAILS are made of RUNNER that moves in a fixed RAIL.
Designed for load capacity from some kg to 600 kg PER RUNNER, the common length of the rail is 3 meters. It can be 5 meters for some references. Should some applications need very great lengths, the rails can be prepared for an end to end mounting.
Linear rails is the optimum solution for protective or access DOORS applications (machine tools, vehicles, trains or subways) .
|
|
| ... products without technical information |
| |
|
These systems employ round shafting, aluminum bodies and dual, angular contact - sealed for life - roller bearing wheels. Each has built-in preload adjustability. SPEED DEMONS are capable of speeds up to 10 meters per second. SPEED DEMONS are easy to install, lightweight and inexpensive.
|
|
rod end housing:
forged steel, tempered, rolled thread, surface galvanized
joint ball:
ball bearing steel, hardened and ground, surface superfinished and chromium plated
race:
Nylon/Teflon/Glass compound
tolerances:
view
|
|
General description:
Let the industry leaders adapt or design a rod end to meet your unique requirements.
From a simple modification of an existing design to a completely unique concept, Alinabal engineers can give you the ideal configuration for your application.
Some of the options available include:
- Variations in shank or stud length
- Variations in ball bore dimensions
- Enhanced plating or corrosion resistance
- Metric dimensions
- Special materials such as stainless steel
- Sealed Rod Ends - In addition to the above, Alinabal has unmatched experience in the area of sealed rod ends. Using rubber or synthetic materials, Alinabal can design and produce rod ends fully protected from contaminants for greatly prolonged life in service.
|
|
|
We offer a complete line of stud type and yoke type cam followers for industrial applications. These bearings are available in steel, stainless steel, and with engineered plastic internal bushings. We specialize in engineered cam followers to fit specific applications.
|
|
|
The SMITH-TRAX® special duty track roller bearings are machined from high-alloy steel and are case-hardened for maximum longevity. These bearings are fitted with deep-groove ball bearings or tapered roller bearings to handle both high radial and thrust load applications.
|
|
- Ampco #18
- Superior wear characteristics
- More durable than plated bushings - NO plating to wear through
- Counterbore for rib in pin retainer plate
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
