|
|
Several standard types of canvas are available:
- PVC-coated polyester: for protection from water, dust and certain acidic environments
- Polyurethane-coated polyester: this is the most commonly used and offers good resistance to swarf and oil. Suitable for machine tool applications
- Viton-coated glass: excellent resistance to oils, shavings, sparks, temperatue and chemicalattack
- Kevlar® polyurethane
- Aluminised polyester
In all cases, we will be happy to assess your particular requirement with a view to suggesting the sheating that will best meet your application requirements.
|
|
ARNOLD of bellows are in the true sense of the word "flexible ".
This concerns in particular the possibility for each application of customers a solution by structure to find legally protected construction procedures and material authority.
Our bellows consist from the principle of a technical fabric, which is form-giving supported by plastic frameworks.
|
|
Stainless steel lamella : particulary resistant to sparks and shavings.
Following application, we can offer others solutions
|
|
Bellows
Arnold bellows offer safe protection for both people and machinery. These are the products to soke your problems - in which material, stability and shape can be individually customised.
If the bellows will be subjected to high mechanical stress and strain, the telescopic covers provide safe protection even at high processing speeds. Due to our patented mounting system, the telescopic covers will either be flexibly mounted or connected with the bellows without the use of adhesive materials under consistent counter pressure, if required and can also be coolant-compatible, if this is desired.
|
|
|
Protective cover complete systems are supplied as overall construction assembly-fairly as unit and installed ready for use to the machine tool. ARNO ARNOLD conceived, designs and manufactures Fix& of finish systems for processing centers, cutting machine tools, deburring centers, erosion machines etc.
|
|
DISMANTLING JOINTS
Flanged ,they start from ND 15 to ND 3000, usually made with bellow in AISI 321 and flanges in carbon steel. Models with tie rods for dismantling only and / or tie rods resistant to thrust pressure.
|
|
HYDRA® corrugated bellows are made by hydraulic forming of thin-walled tubes. They can have one or more plies depending on the requirements profile.
Single-ply bellows have small spring rates and are employed particularly in vacuum technology.
Multi-ply bellows have a high compressive strength and at the same time high flexibility. They are used, for example, as valve spindle seals with working pressures up to 400 bar.
|
|
|
We can handle most of your requirements without needing to add tool-related cost, jn the cylindrical nd cone-cylindrical models.
|
|
Bellows
Arnold bellows offer safe protection for both people and machinery. These are the products to soke your problems - in which material, stability and shape can be individually customised.
If the bellows will be subjected to high mechanical stress and strain, the telescopic covers provide safe protection even at high processing speeds. Due to our patented mounting system, the telescopic covers will either be flexibly mounted or connected with the bellows without the use of adhesive materials under consistent counter pressure, if required and can also be coolant-compatible, if this is desired.
|
|
We design and manufacture protective cover systems for the special demand in your machine. We can consider mechanical measured variables (statics and dynamics), as well as environmental influences (e.g. liquids, temperature and chemical reactions).
When strong mechanical loads additional telescope sheet metals offer to safe protection also with high Verfahrgeschwindigkeiten.
The products and systems developed by us have themselves already under extreme conditions proven in horizontal/vertical processing centers, sharpening and milling machines, welding, gumption and flame cutting machines, center lathes, elevating platform and liftings device, with spindles and linear guidance, in the wood, glass, stone, treatment of ceramic(s), the robotics and automation, as well as in the measuring and medical technology, space and as Design element in furniture, and shining central industry.
|
|
Bellows
Arnold bellows offer safe protection for both people and machinery. These are the products to soke your problems - in which material, stability and shape can be individually customised.
If the bellows will be subjected to high mechanical stress and strain, the telescopic covers provide safe protection even at high processing speeds. Due to our patented mounting system, the telescopic covers will either be flexibly mounted or connected with the bellows without the use of adhesive materials under consistent counter pressure, if required and can also be coolant-compatible, if this is desired.
|
|
The variety of materials we use, the shapes and the colours, make SPM sleeves apt for any activity sector:
- Worker protection: cutting tables, ladle screws, laser rays, dials etc.
- Mechanism protection: robot arms, jack rods, sliders etc.
- Decoration: industrial design, contemporary furniture, architecture, fashion
In all cases we would be happy to assess and produce the bellow sleeve that is right for your particular application.
|
|
Bellows
Arnold bellows offer safe protection for both people and machinery. These are the products to soke your problems - in which material, stability and shape can be individually customised.
If the bellows will be subjected to high mechanical stress and strain, the telescopic covers provide safe protection even at high processing speeds. Due to our patented mounting system, the telescopic covers will either be flexibly mounted or connected with the bellows without the use of adhesive materials under consistent counter pressure, if required and can also be coolant-compatible, if this is desired.
|
|
Bellows
Arnold bellows offer safe protection for both people and machinery. These are the products to soke your problems - in which material, stability and shape can be individually customised.
If the bellows will be subjected to high mechanical stress and strain, the telescopic covers provide safe protection even at high processing speeds. Due to our patented mounting system, the telescopic covers will either be flexibly mounted or connected with the bellows without the use of adhesive materials under consistent counter pressure, if required and can also be coolant-compatible, if this is desired.
|
|
For both intermittent and continuously rated joints where lubrication such as an oil bath is not available, we recommend the use of boots suitable for grease packing to retain lubricant and keep our contaminants. These are available in kits for all sizes of single joints and can be used in pairs on the double joint. Curtis boots do not require grooves on the hub of the joint to hold the boot in place.
Curtis Boot Kits consist of one boot and two ties. Part numbers may be obtained on the Selection Guide provided above.
Curtis Boots are typically manufactured from a polyvinyl chloride rubber blend, which is impervious to ozone and is ultraviolet stabilized. Our boots have a useful temperature range of -60°F to +220°F.
|
|
GUIDE RAIL PROTECTION BELLOWS
MADE-TO-MEASURE PROTECTION BELLOWS
All geometric shapes
Made from polyurethane or Kevlar
With or without stainless steel scales
Aluminium mounting plates
Guiding via PVC frames in each fold
Friction rollers or shoes
ALL OUR TEAMS ARE AVAILABLE TO CREATE YOUR BELLOWS
|
|
MADE-TO-MEASURE TELESCOPIC COVERS
7000 types of protective covers already available
All models of covers, all brands of machines
Horizontal, vertical, rail, double axis protection…
Measurements carried out on machine or on model
Made-to-measure telescopic cover supplied in 4 weeks
12-month guarantee
RECONDITIONING SERVICE :
Our teams take over your current worn or even damaged cover and we guarantee complete reconditioning within 3 DAYS.
40 to 60% less expensive than purchasing a new cover Water-tightness,
Guiding, sizing, finishing…
Technical improvement of original cover Complete reconditioning in less than 1 week Minimum guarantee 6 months.
|
|
PROTECTION BELLOWS WITH SCALES
MADE-TO-MEASURE PROTECTION BELLOWS
All geometric shapes
Made from polyurethane or Kevlar
With or without stainless steel scales
Aluminium mounting plates
Guiding via PVC frames in each fold
Friction rollers or shoes
ALL OUR TEAMS ARE AVAILABLE TO CREATE YOUR BELLOWS
|
|
Even at long-term productions box bellows keep their
form stability in problematic corner areas.
Also big sizes are possible and stable because of supporting frames.
|
|
Multiflex bellows are made for all kind of geometry.
They are highly flexible and guarantee an absolutely
leak tigthness at the same time.
|
|
Due to their high insulation thickness, pressings are suitable
for extreme application range in terms of thermal and climatic load cases.
|
|
Flex bellows convince by an almost unlimited application area.
This products are equal to even difficult tasks with their enormus
adaptability.
|
|
Custom Molded Polymer Parts
- EPDM, Neoprene, Polyisoprene & More
Lauren Molded Parts - Today, we can deliver a complete line of custom molded polymer products...dense, sponge, gel, rubber-to-metal-bonding and more. Now there is one integrated supplier for your high-tech extruded and molded rubber needs: Lauren Manufacturing. Our molded products are available in a variety of polymers and are listed below.
Molded Products Are Available In A Variety Of Polymers:
- EPDM
- Neoprene
- Butyl rubber
- TPU
- Polyisoprene
- Fluoroelastomer
- SBR
- PU
- ECO
- Hypalon
- EVA
- Nitrile
- Silicone
Complete polymer extrusion and molding capabilities from a single high-quality source.
|
|
The rugged one allows an invidual material choice for rough handling
at extreme operating conditions.
|
|
Slideway protection are dimensonally stable and flexible.
Due to their lightly running they are particularly quiet. A save guiding
avoids pulling.
|
|
|
|
|
|
Its matter, fabric coats indeformable, allows a great flexibility and an effective protection of the slides against the stains, the chips and cutting fluids while offering a good esthetics even in high rates of travel.
EXAMPLES of APPLICATIONS
Machines of machining: turns, center hole, grinding machines, milling machines of all types in particular by removal of chips
Protect from the aggressive emulsions and oils, the chips on sharp board, often projected at high rates of travel
When the environment requires it, this type of bellows can be equipped with plates stainless steel (see the bellows with telescopic sheets)
The linear motors that one usually meets require of materials light, flexible but resistant to the tear. Our bellows are thus particularly well adapted to high rates of travel (up to 180 m/mn subject to the application).
Machines of laser cutting and plasma, jet of water
Special machines of machining or other (robot-like, lifting, packing.)
Measuring device and adjustment, equipment medical and agro-alimentary
|
|
The base is standard bellows of slide, which offers an additional protection by telescopic aluminum or the steel sheet addition on request. We recommend his use in the event of intensive projections of chips hot and/or cutting.
The plates resist the acids and can be realized according to your possibilities of obstruction.
|
|
Modules of Protection centers X and Y
The protection measures are integrated and modifiable according to the requirements
Center X: Flex protect, bellows with plates, carpets articulated, telescopic covers
Center Y: Bellows with plates, bellows jealousy, carpets articulated, winding
Each component is dismountable separately.
|
|
| ... products without technical information |
| |
|
|
